K2 Nitrogen Vessel

This listing is for 1 of 2 Grant Instruments DEN-1 DensitometerGrant Instruments DEN-1 is a compact  (more)benchtop densitometer (suspension turbidity meter) for measuring the turbidity of cell suspensions in a variety of life science applications. The densitometers are designed and factory calibrated to measure turbidity in the range of 0.5 to 4.0 McFarland units with a small standard deviation.

Scilogex Fixed Angle Rotor 5mL x 18 The Scilogex Fixed Angle Rotor 5mL x 18 has the capacity to acco (more)modate 18 x 5mL tubes and can a reach maximum speed of 15,000RPM. For use with the DM0636 centrifuge. INCLUDED: The Scilogex Fixed Angle Rotor 5mL x 18 includes: - Cover - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo MAGIO MS-450F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz Working T (more)emperature Range -30°C to 200°C Cooling Capacity 460W at 20°C Refrigerant R449A Features - TFT Color Touchscreen - Multilingual - Input for setpoints, warning/safety values and menu functions - ICC (Intelligent Cascade Control), self-optimizing temperature control - ATC3 3-Point-Calibration - Pt100 External sensor connection for measurement and control - Continuously variable pressure/suction pump - Early warning system for low liquid level (DBGM 203 06 059.8) - Adjustable high temperature cut-out, visible via display - RS232/RS485, USB and Ethernet interface for online communication - Integrated programmer - Built-in drain tap - Class III (FL) according to DIN 12876-1 The MAGIO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations offer low temperature capabilities from -30°C to -50°C with an upper temperature limit of 200°C. The MAGIO™ MS circulator incorporates easy operation via a large color TFT touchscreen. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A multilingual interface, integrated programmer, Pt100 port for external temperature control, RS232/RS485, USB and Ethernet connections for external PC control and data-logging. Modbus TCP/IP incorporated. Stakei port for external accessory control (solenoid valve, etc.). PID temperature control provides ± 0.01°C stability. Infinitely variable centrifugal pressure/suction pump capacity of 16-31 L/min with pressure to 3.4-13.3 psi. Stainless steel bath tanks with integrated drain port. 115V version with 1 kW heating power; 230V version with 2 kW heating power. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo MAGIO MS-450F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unrivalled functionality in a line of high-performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. Applications Weighing, Parts Counting, Percent Weighing, Checkweighing, Animal/Dynamic Weighing, Filling, Totalization/Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC Display 5.7" (145 mm) Full-color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232/Ethernet (accessories sold separately) . GLP/GMP data output with real-time clock. Construction Metal base, ABS top housing, stainless steel pan, glass draftshield with top mounted side doors & flip/sliding top door, illuminated up-front level indicator, weigh below hook, security bracket, calibration lock, 4 touchless sensors, in-use cover Design Features Selectable environmental filters, auto tare, user selectable span calibration points, software lockout and reset menu, user selectable communication settings and data print options, user definable project and user IDs, auto standby, up to 14 operating languages Technical features: Internal Calibration: AutoCal™ - Automatic Screen: Included Lid in use: Included Linearity: ±0.0002g Minimum weight according to (USP, 0.1% typical): 0.16g Repeatability (typical): 0.0001 g Stabilization time: 2 s Tare range: to flow by subtraction

Polyscience SD28H170-A11B 28L Heated Circulator, Standard Digital (Ambient +10 to 170C), 120V, 60HzP (more)olyScience Circulating Bath with Standard DigitalTemperature Controller. Extremely easy to use and maintain, it combines designinnovation with highly intuitive operation to deliver convenient and reliableliquid temperature control for a wide range of applications.Features Large, universal icon and English display Swivel 180™ Rotating Controller On-board connectivity: RS-232 serial output On-screen prompts Automatic performance optimization Single-point calibration capability INCLUDED: The Polyscience SD28H170-A11B 28L Heated Circulator, Standard Digital (Ambient +10 to 170C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA VACSTAR control Final pressure without gas ballast 2 mbar Pump rate max. (50/60Hz) 22 l/min Inpu (more)t pressure 2 - 1030 mbar Features - Powerful 4-chamber membrane vacuum pump, chemical-resistant and low-maintenance - Integrated vacuum controller with a detachable WiCo controller for versatile operation - Selection of operating modes from automatic to manual, including pumping, evacuation, and cleaning functions - High suction performance at 22 l/min with a minimum pressure of 2 mbar - Achieves a final pressure of 2 mbar without gas ballast, featuring 4 suction levels - Boiling point detection and a comprehensive solvent library for specific applications - Features a venting valve, condensate trap, and emission condenser for enhanced safety - Timer function for scheduled operations with a noise level of 54 dB(A) at low pressure Separation, filtration, removal: The VACSTAR dry 4-chamber membrane vacuum pump is powerful, resistant to chemicals and low-maintenance. VACSTAR control is the ideal system with its integrated vacuum controller and removable display. The controller offers a suitable mode for the desired process: from automatic to manual operation, right through to pumping or an evacuation and cleaning function. Integrated vacuum controller with removable controller (WiCo): Depending on the application, you can easily select your operating mode either by using the intuitive operator menu or by remote control.For additional safety for users and environment, we recommend using the VSE 1 vacuum safety emission condenser, which prevents solvents from being released into the room air. The VSE 1 is available as accessory. INCLUDED: The IKA VACSTAR control includes: - WiCo VACSTAR control - Vacuum hose (1 m) - WH11 - OS 1.0 WiCo power supply unit - USB Cable - USB A to Micro-B, 2 m - USB A-B Cable - Screw driver - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA DB 4.4 Round Bottom Tubes Dry Block (12/13 mm)

Heidolph 36130500 Titramax 1000 Vibrating Platform Shaker w/ Heating Module and Flat Incubator Hood  (more)Speed Range 150 to 1,350 RPM Temperature Range Ambient +5°C to 65°C Platform Size 290 x 258 mm Features - Used for research requiring rigid or gentle shaking on microtiter plates or test tubes - Includes safety features, ease of use, and increased efficiency - Insulated system prevents heat transfer from the motor, safeguarding samples - Suitable for the modular incubator system with variable temperature control up to 65°C - Medium-sized model with a load capacity of 5kg - Accepts 6 microtiter plates for increased throughput - 1.5mm vibration orbit for gentle mixing with small sample volumes - Analog process timer for unattended operation (1 to 120 minutes) - Acoustic alarm and automatic stop after the set time expires - Variable speed control (150 to 1,350rpm) via analog knob This Tritramax package includes one vibrating platform shaker Titramax 1000, one heating module and one flat incubator hood. Titramax 1000, the incubating model platform shaker, is used for research which requires ridged or gentle shaking for small samples on microtiter plates or test tubes. Includes all standard features for safety, ease of use and increased efficiency. It comes with an insulated system to prevent any heat transfer from the motor that could cause potential thermal damage to your sample. This model is suitable for the modular incubator system and is recommended for applications which require variable temperature control of up to 65° C. It comes with an insulated system to prevent any heat transfer from the motor that could cause potential thermal damage to your sample. It is a medium sized model and accepts load capacities of 5kg. The use of 6 microtiter plates increases your throughput by 50%. The 1.5mm vibration orbit performs gentle mixing with best results using small sample volumes. The analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped. Set and continuously adjust the variable speed on the analog control knob from 150 to 1,350rpm. The small incubator hood comes with a total height of 163mm and is recommended especially for microtiter plates, culture plates, small flasks, media bottles and Erlenmeyer flasks up to 100ml. The transparent and non-fogging PETG material allows for sample viewing and is easily cleaned. Click Here to View Product Video INCLUDED: The Heidolph 36130500 Titramax 1000 Vibrating Platform Shaker w/ Heating Module and Flat Incubator Hood includes: - Titramax 1000 Shaker - Heating Module - Flat Hood - Power Cord - Three Year Manufacturer's Warranty

The Eppendorf TransferMan NK 2 micromanipulator combines simplicity and innovation in a user friendl (more)y system that satisfies even the most sophisticated user requirements. With the precision proportional kinetics and menu-driven control, TransferMan NK 2 offers an intuitive operation, allowing the most complex micromanipulation techniques to be carried out rapidly, easily and precisely. Features Integrated coarse and fine manipulator with proportional control via central joystick Work range: 20 mm per axis Programmable Z axis limit as defined injection level in order to avoid capillary breakage Automated Home function for rapid capillary exchange Adjustable injection speed Adjustable injection angle for complex injection processes Comfortable fine adjustment of work speed with positioning wheel Storage of 3 independent work positions Menue controlled programming via display Save and download of user profiles External control for automatic processes