Easily list your scientific equipment

Top suppliers for laboratory & industry

New and used instruments

Marketplace
Analytics
Brand
Integra
Supplier
Galileo Equipos
Location
PI El Nogal - Spain
This item is
Not available
State of item
used
Categories

Integra Fireboy Plus

Galileo Equipos
item image

Description by the supplier

Integra Fireboy Plus. Automatic Bunsen burner with non-contact ignition sensor. It can work anywhere with a side-mounted cartridge although it also includes nozzles for connection to a propane, butane or natural gas cylinder as standard. Optical indication for safety shutdown. 10 minute timer. Adjustable flame duration between 3 and 13 seconds with potentiometer.


The Fireboy Plus is an automatic Bunsen burner for flame sterilization and burning of glass or metal laboratory materials.

About QuestPair

QuestPair matches professionals in research and industry with manufacturers, suppliers and resellers of scientific products. Companies and organisations can easily sign up for an account and showcase their laboratory equipment and other products on the marketplace. It is possible to list both new as well as used equipment. QuestPair features a variety of equipment for the physical, chemical and life sciences such as spectrometers, balances, centrifuges, testing devices, medical devices, incubators, microfluidics kit, heaters, coolers and other specialist instruments.

Related items:
Bibby Scientific Aquatron A4000D Water Still-cover
Bibby Scientific Aquatron A4000D Water Still

Unused device. Original packaging. 6 months warranty. Aquatron® units have fully automatic operation (more) direct from a potable water supply - alternatively, an optional water feed conversion kit enables connection to any pre-treated water source. The distillate storage Level control switch fits any collection reservoir. A double coil condenser and boiler system combined with a VYCOR® silica glass sheathed heating element provides exceptionally high quality pyrogen-free distillate (although distillate should be tested). These stills can also be used with the filter and deionisation units for which the water feed conversion kit (Cat. No. 171-1210) is required. Fully automatic operation May be connected to a potable or pre-treated (conversion kit required) water supply Operates with low quality or low pressure water source Automatic cut-out for water supply failure BioCote® antimicrobial protection pH, conductivity and resistivity are affected by temperature and the presence of absorbed carbon dioxide. Specifications are based on tests conducted at 20 °C with CO₂-free water. Care is needed to obtain pyrogen-free water and the distillate must be tested before use. Technichal Specifications: - Destillation: Double - Output: 4 l/h H2O bidest. - pH: 5,0 to 6,5 - Temperature: 25 to 35 °C - Power: 6 kW - Dimensions (WxDxH): 550 x 240 x 410 mm - Weight: 30 kg - Water input: 2 l/min All Stuart® water stills are classified as ‘Permanently Connected Equipment’ and should be connected to the electricity supply by a qualified electrician in the manner described in the user manual. Installation for the Stuart Aquatron A4000D

€4,240.00 ex VAT
Germany
general laboratory equipment other
Lab Oven STF-N 120 FALC-cover
Lab Oven STF-N 120 FALC

A laboratory oven with an exceptional quality/price ratio! 100% Made in Italy and with all accessori (more)es already included as standard.Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 300°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory Oven STF-N 52 FALC Natural Convection

€1,821.96 ex VAT
€2,168.13 incl. VAT if applicable
Italy
general laboratory equipment other
People are watching right now:
Agilent 240FS series Atomic Absorption Flame system-cover
Agilent 240FS series Atomic Absorption Flame system

For sale: Refurbished Agilent 240FS series Atomic Absorption Flame system (please ask for official q (more)uote) Complete working system with burner, software, computer, cables. Also available: SPS3 sampler and other options if needed Other Atomic Absorption Systems like Varian 220FS, 220Z Furnance, 240Z Furnance, Perkin Elmer 400 series New and used parts for Agilent and Varian AAS systems Other brands like Perkin Elmer or Thermo   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We can deliver maintenance and repair services by our own engineers   The 240FS AA is a fast sequential atomic absorption spectrometer that can double sample throughout and dramatically reduce running costs. Able to handle multi-element suites with ease, the Agilent 240FS AA system is ideal for environmental, food, and agriculture labs. The 240FS AA features automatic lamp selection, programmable gas box, and D2 background correction. A full range of AA accessories enable extra capabilities. Key Features Boost productivity and reduce running costs using Fast Sequential analysis Reduce your analysis time Reduce sample consumption Get accurate results Improve precision and accuracy Simplify your analysis Tune your flame AA performance Mark 7 atomization system

Netherlands
atomic absorption instruments, atomic absorption
Lab Oven Smart SLW 32 POL-EKO-cover
Lab Oven Smart SLW 32 POL-EKO

LABORATORY OVEN SLW SMART POL-EKO SLW - FORCED AIR CONVECTION The SLW series laboratory ovens are de (more)signed to reach high temperatures, up to 300 °C. Available from 15 to 1000 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use, just like your smartphone. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - 4,3", clear, full colour touch screen - USB and LAN ports for data transfer - multi-segment time and temperature programs - loop function up to 255 times or endless - adjustable start delay feature - adjustable ramps - recording of min, average and max temperature value for each segment - overview of set and current parameters while operating - operating in temperature or time priority mode - fan speed control in the range of 0 … 100% or 10% … 100% (depending on the chamber capacity) - temperature sensor fail alarm - possibility of temperature calibration by the User - power failure control system (program continued after restoring power) - visual and sound alarm - internal memory for programs and data storage - operating with gloves on - event registry - user manual for direct download QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLW SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLW SMART SERIES The 10 models of the SLW series cover most of your needs: from mini oven to the 1000 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for incubator models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door Example of use of the Smart SLW 32 POL-EKO laboratory oven for the disinfection of documents.

€1,370.00 ex VAT
€1,630.30 incl. VAT if applicable
Italy
general laboratory equipment other
Wet gas vacuum pump Laboport SD N 820.3 FT.40.18 KNF-cover
Wet gas vacuum pump Laboport SD N 820.3 FT.40.18 KNF

The N 820.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products.  The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications.  When the humid gases are sucked in, condensation may form in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 20 l / min Final vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

€1,990.00 ex VAT
€2,368.10 incl. VAT if applicable
Italy
vacuum pumps, pumps liquid & other
Disclaimer: QuestPair assumes no responsibility or liability for any errors or omissions in the content of this site. The information contained in this site is provided and presented on an “as is“ basis with no guarantees of completeness, accuracy, usefulness or timeliness.

Customer Service

Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.

We are available to assist you Mon-Fri, 10am - 5pm CET.

+31 (0) 73 7114717
[email protected]