IKA RV 10 Auto Rotation Evaporation System

Complete rotation evaporation system consisting of:

IKA RV 10 Auto rotary evaporator

IKA HB Digital waterbath

IKA RC 2 Control recirculating chiller

IKA Vacstar Digital vacuum pump

IKA RV 10 Auto:

The completely revised RV 10 auto is the flagship of the IKA Rotation Evaporator product line. Its impressive features include an innovative control concept with a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards. The RV 10 auto offer all properties required for efficient, safe, and cost-effective operations. These include automatic control of the vacuum and cooling water volume. Its intuitive handling concept quickly leads its users to their desired results in every application. Thanks to specially designed glass guides, the condenser makes extremely efficient use of the 1500 cm² cooling surface. Thanks to its extended ramp programming capability, the RV 10 auto allows users to carry out customized procedures. Other innovative features, such as smooth start, interval mode, right-left operation in interval mode, or the timer function for time-lapse tests, make everyday work in the laboratory much easier. Safety is ensured by the motorized lift with safety-stop function that automatically lifts the evaporation flask out of the heating bath in the case of power failure. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function.

Type of cooling: Vertical condenser

Cooling surface: 1500 cm2

Speed range: 5 – 300 rpm

Reversible direction of rotation: yes

Speed tolerance set rotation speed < 100rpm: ±1 rpm

Speed tolerance set rotation speed > 100rpm: ±1 %

Lift: Motor

Stroke: 140 mm

Vacuum controller integrated: yes

Timer: yes

Dimensions (WxHxD): 500 x 430 x 440 mm

Weight: 34.96 kg

IKA HB Digital:

Compact and ergonomic heating safety bath for all tempering media.

Heating temperature range: Ambient – 180°C

Heat control: Turning knob

Set temperature resolution: ±1 K

Filling volume max.: 4 l

Filling point min.: 60 mm

Material in contact with medium: stainless steel 1.4404

Fixed safety circuit: 190°C

Adjustable safety circuit: 50 – 190°C

Outer diameter: 257 mm

Inner diameter: 225 mm

Outer height: 190 mm

Inner height: 130 mm

Dimensions (WxHxD): 330 x 190 x 325 mm

Weight: 3.9 kg

IKA RC 2 Control:

High efficient and temperature-stable circulating chiller with unique wireless controller. Designed for cooling applications up to -30 °C with powerful 400 W cooling capacity.

The speed-controlled PEEK pump allows an indirect continuous adjustment of the maximum pressure and flow rate. Due to its outstanding temperature stability of about ± 0.05 K (at -10 °C), the RC can handle even the most demanding applications.

Via the connection socket for an external PT 100 temperature sensor, it is possible to measure and control temperature directly in the working medium. An external PT 100 temperature sensor is included in scope of delivery.

With the wireless controller (WiCo), it is possible to operate the RC 2 safely and comfortably independent of the device position.

The included feed hopper and bleed valve enable the safe and clean handling of the thermofluid. An easy to open front hood allows for convenient cleaning of the air filter.

The high quality insulated 4-liter bath reservoir allows the use of up to 2.5 liters of thermofluid in the external cooling circle without refilling.

Cooling agent pressure max.: 20 bar

Cooling capacity (20°C): 400 W

Cooling capacity (10°C): 370 W

Cooling capacity (0°C): 320 W

Cooling capacity (-10°C): 240 W

Cooling capacity (-20°C): 130 W

Operating temperature min.: -30 °C

Operating temperature max. (with external heating): 80 °C

Temperature display: yes

Temperature control: PT 100

Connection for ext. temperature sensor: PT 100

Display resolution: 0.01 K

Display for operation with ext. sensor: yes

Warning function optical: yes

Warning function acoustic: yes

Warning function excess temperature: yes

Warning function insufficient temperature: yes

Sub-level protection: yes

Filling volume: 1.4 – 4.0 l

Pump type: Pressure- / suction pump

Pump capacity adjustable: yes

Pump pressure max. (0 liters discharge flow): 0.3 bar

Pressure pump (suction side) (0 liter flow): 0.2 bar

Flow rate max. (0 bar back pressure): 18 l/min

Calibration option: yes

Dimensions (WxHxD): 220 x 475 x 525 mm

Weight: 28.5 kg

IKA Vacstar Digital:

The four-chamber membrane vacuum pump convinces with its high suction capacity, low space requirement and high serviceability. The setting of the parameters is carried out through a rotary-push button over a digital display showing current rpm.

The Vacstar digital is used for dry and oil-free applications in the laboratory. The membranes of the pump are particularly chemical resistant.

Pump rate max.: 1.32 m³/h

Pump rate max.: 22 l/min

Final pressure without gas ballast: 2 mbar

Suction levels: 4

Cylinder: 4

Two-point control: yes

Analog speed vacuum control: yes

Speed control: Turning knob

Speed range: 285 – 1200 rpm

Material in contact with medium: Al2O3, PTFE, FFPM, PPS, NBR

Dimensions (WxHxD): 150 x 375 x 370 mm

Weight: 11.5 kg

QuestPair matches professionals in research and industry with manufacturers, suppliers and resellers of scientific products. Companies and organisations can easily sign up for an account and showcase their laboratory equipment and other products on the marketplace. It is possible to list both new as well as used equipment. QuestPair features a variety of equipment for the physical, chemical and life sciences such as spectrometers, balances, centrifuges, testing devices, medical devices, incubators, microfluidics kit, heaters, coolers and other specialist instruments.