IKA DB 4.2 Round Bottom Tubes Dry Block (10 mm)

pulse dampener

Dimensions (WxDxH): 600 x 480 x 950 mm

Yamato WB-301UFB Auto Pure Benchtop Type 1 Water Purification System with Ultrafiltration Module, 12 (more)0V Configuration Benchtop Flow Rate (Typical) 2.5L/min (0.67 gpm) Resistivity 18.2 MΩ-cm Features - 2.5 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Intuitive, user-friendly touch screen interface - Large capacity, low cost consumable cartridges - Replacement cartridges are fresh and made in the USA with a 1 year shelf life - Compact design - Real time quality monitoring with leak detection - Quick change, cartridge – no tools needed - Premium quality ion exchange resin Compact design, benchtop or wall mount water purification system in 120V with ultrafiltration that produces Type 1 deionized water. Low cost of ownership. Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals and pyrogen removal ultrafiltration. As water exits the system, a final filter removes particulates and bacteria to reach Type 1 water specifications. INCLUDED: The Yamato WB-301UFB Auto Pure Benchtop Type 1 Water Purification System with Ultrafiltration Module, 120V includes: - Drain fitting – ¼ MNPT x HB - 6 Feet of 3/8” OD Tube for Inlet - 6 Feet of 3/8” Hose for Drain Connection - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The anti-draft chamber is an optional accessory intended for WAY KO mass comparators working in unfa (more)vourable conditions (air-drafts). It is mounted on a table, inside the mass comparator is placed. The chamber features sliding top and side panes allowing free access to the weighing chamber of the mass comparator. All components of the anti-draft chamber are made of metal and glass with conductive coating eliminating influence of electrostatics on the weighing result.

Hermle Z36-HK with High Speed 6 x 50ml Rotor The Z36 HK is the result of many years of experience in (more) the design of universal centrifuges, high speed centrifuges and compact microcentrifuges. The result is a “Super-Speed” centrifuge with unmatched performance among benchtop centrifuges. A robust motor drive powers a variety of high speed angled rotors to speeds that would generally only be achievable in large, floor-standing ultra centirfuges. 2.0ml microtube samples can reach forces above 65,000 x g, while 50ml samples, as high as 41,410 x g.In addition to its high speed capabilities, the Z36 HK doubles as a universal centrifuge with a 4 x 250ml swing out rotor (offering inserts for all common tube sizes) as well as a 2 x 3 position swing-out microplate rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.INCLUDED: The Hermle Z36-HK with High Speed 6 x 50ml Rotor includes: - Z326-0650-HS High Speed 6 x 50ml Round Tube Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This item has just arrived in our stock. Please enquire for further details.

Oxford Cryosystems AD41 Dry Air Unit This was removed from a university lab where it was surplus to  (more)requirements. The unit has 32953 hours but still functions as intended. It is in good cosmetic condition with marks from use.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Ohaus 30314829 10 x 50ml Fixed Angle Rotor The Ohaus 30314829 10 x 50ml Fixed Angle Rotor accommodat (more)es a capacity of up to 10 x 50ml. This rotor is designed for use with Ohaus , FC5718, FC5718R, FC5816, FC5816R, FC5916, and FC5916R series centrifuges, and reaches speeds up to 10,500 RPM with a maximum RCF of 16,022 x g. INCLUDED: The Ohaus 30314829 10 x 50ml Fixed Angle Rotor includes: - Ohaus 30314829 10 x 50ml Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty