Hermle Z327-200-BUK 200ml Round Bucket for Z327-200-AC, 2/pk

Pure water specifications Daily volume: <10 liters Dispense Flow rate: Up to 2.0 l/min Reverse osmos (more)is make up flow rate at 15°C: 10 l/hour Inorganics at 25°C: 18.2 MΩ.cm Total organic carbon (TOC): <5 ppb Bacteria: <0.001 CFU/ml Bacterial Endotoxin: <0.001 EU/ml RNase: <1 pg/ml DNase: <5 pg/ml Feed water specifications Source: Potable tap water Free Chlorine: <0.5 ppm max TOC: <2 ppm Carbon dioxide: <30 ppm (recommended <20 ppm) Silica (recommended max): <30 ppm Temperature: 4 – 40°C (Recommend 10 – 15°C) Flowrate (maximum requirement): Up to 75 l/hr (20 USG) Drain requirements: <90 l/hr (23 USG) Feedwater pressure: 6 bar max, 2 bar min Dimensions (HxWxD): 1020 x 236 x 470 mm Weight: 23 kg Excluding new filters

Capacity: 100 L Max pressure: 11 bar Permissible temperature range: -10°C to 100°C

This Hoshizaki FM-80KE flake ice machine makes 85 kg of flake ice per 24 hours and has a built-in st (more)orage bunker for 26 kg. The ice is compressed during production, which ensures a longer melting time. Production capacity per 24 hours: 85 kg Storage capacity: 26 kg Dimensions (WxDxH): 640 x 600 x 800 mm Weight: 65 kg

For use with ISOLATOR 10mL Microbial Tubes.

OHS are designed to ensure the highest safety standards. The resistant sealed case and the IP 54 deg (more)ree of protection guarantee durability over time even in the most aggressive environments. Continuous trouble-free operation in your lab, backed by a 3-year extended warranty. Constant torque at any speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional shaft stirrer and VELP OHS Series shaft stirrers. Thanks to the SpeedServo feedback system, the torque remains constant at any speed, even at maximum. Always having a constant torque is a very important parameter for the reproducibility of the analyses. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod drop into the liquid? SmartChuck™ technology makes this activity quick and easy with just one hand and no special accessories. Two simple movements allow you to unlock the protective ring and remove or replace the stirring rod. If the protection ring is opened during the analysis, the instrument interrupts the stirring, showing a safety message on the display. Maximum Protection and Security OHS Advances guarantee the highest safety standards. The IP54 degree of protection ensures maximum protection of the instrument from corrosion and high performance in challenging work environments. The stirring is activated through pressure, avoiding involuntary start-ups and the set speed is reached gradually. The large number of sensors and safety controls deactivate the stirring in case of overload, overheating or short circuit. Integrated Timer to Schedule Your Activities The OHS Digitals are equipped with timers that allow you to program the stirrer according to your needs and to carry out the reactions independently. Setting the timer is quick and easy, just press the dedicated button and select a time interval between 1 min and 99:59 hours. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS DIGITAL MODELS A - 7 Segment Display LED B - Torque indicator bar C - Low speed LED (only OHS 200) D - Gear key (only OHS 200) – Timer key for other models E - High speed LED (only OHS 200) – Timer LED for other models F - Speed control knob G - Timer LED (for OHS 200) - Upper lock LED for other models H - Timer key (for OHS 200) – Lock key for all models I - Lower Lock LED J - Main switch K - Smart chuck

Yamato DKN-402C Programmable Forced Convection Oven 90L, 115V Temperature Range Ambient +10°C to 26 (more)0°C Temperature Distribution Accuracy ± 2.5°C (at 210°C) Chamber Volume 90L Features - Best seller based on excellent performance and affordability - Superior temperature accuracy - DKN302C/312C/402C/412C/602C/612C models come with observation windows - Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions) - Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities - Increased safety and self-diagnostic functions - Overheating prevention and calibration off-set are possible with auxiliary functions - Easy to use and maintain - Built in exhaust ports Programmable 90L forced convection constant temperature oven with extended functions and safety features. Bestseller based on excellent performance and affordability. Superior temperature accuracy. Comes with an observation window. Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions). Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities. Overheating prevention and calibration off-set are possible with auxiliary functions. Easy to use and maintain. Equipped with built in exhaust ports. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKN-402C Programmable Forced Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA R 3004 Blade stirrer Maximum Speed ≤ 1000 rpm Flow Type Radial Material Stainless Steel Features (more) - Generates radial flow, effectively mixing material from both top and bottom - Ideal for aerating low viscosity media and homogenizing solids in liquids - Designed for medium to high speed use for versatile application needs - Compact stirrer diameter of 30 mm for focused and efficient mixing - Made from AISI 316L / 1.4571 stainless steel for superior durability and corrosion resistance - Suitable for use within a wide ambient temperature range of 5 - 40 °C, ensuring reliability under various conditions This stirrer is equipped with a 50 mm diameter and a 350 mm shaft length, designed to create an axial flow that moves media from the bottom upwards, suitable for mixing and heat exchange in medium to high viscosity substances. Constructed from AISI 316L / 1.4571 stainless steel, it offers durability and resistance to corrosion. With a weight of 0.2256 kg and an overall height of 87.7 mm, it is built for stability and ease of integration into various lab environments. The stirrer is intended for low to medium speed applications, with a maximum operational speed of ≤ 800 rpm and can be used within an ambient temperature range of 5 - 40 °C.INCLUDED: The IKA R 3004 Blade stirrer includes: - IKA R 3004 Blade stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

Equipped with a 4 cuvette holder Wavelength: 325 – 1000 nm Absorbance range 1: 0 – 1.0 Absorbance ra (more)nge 1: 0.1 steps Absorbance range 2: 0 – 1.0 Absorbance range 2: 0.2 steps Transmittance: 0 – 100%