Heidolph Hei-VAP Expert ML/G3 Non Coated Motor Lift w/ G3 Vertical Glassware

LAUDA ECO Heating thermostat LAUDA ECO stands out for its range of features and ease of use. ECO the (more)rmostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that the regulation of the flow between inside and outside is also possible during operation. - The circulation pump can be adjusted on six levels - The ECO heating thermostats line includes transparent baths up to 100°C and stainless steel baths up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Temperature graphs on display - Convenient operation with softkey cursor - Mini USB interface Performance graph of the pressure pump on the six levels. TECHNICAL VISUALIZATION 1 Light sensor for automatic control of display brightness 2 Monochrome LCD display 3 Control panel (refer to following page) 4 Mains switch 5 Selector switch for dividing up the external and internal pump flow 6 Pump output for internal bath circulation 7 Pump output for bath circulation or connection to the pump connection set 8 Pt100 temperature sensor 9 Heater Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In video, the animation shows the ST2 refrigerated incubator with the possible shelves available: shelf with compartments; perforated shelf; grill shelf. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Benchmark Roto-Therm Plus Incubated Rotator Variable Speed w/ Tube Holders Benchmark’s new Roto-Ther (more)m series of incubated rotating mixers provide a wide range of mixing capabilities. Suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, histochemistry, hybridization etc, the mixers include interchangeable tube holders for accomomodating all common tube sizes from 0.5ml to 50ml. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing. For applications requiring temperature control, the Roto-Therm series can be digitally programmed to maintain chamber temperatures of ambient +5C to 60C and include an “in-lab” calibration function for ensuring accurate temperature control. The Roto-Therm is also available in a “Plus” configuration, providing the following additional features: Variable speed: 5 to 70rpm “Mix” function: Rotating in combination w/ oscillations (increased mixing) “Pause” function: Rotating with intermittent “stops” during rotation “Rock” function: Back and forth, gentle rocking motion (see-saw) Included tube holders hold capacities of 11 x 1.5/2ml, 5 x 5-7ml, 5 x 10/15ml, and 6 x 50ml with 24 x 0.5ml. The Plus model also offer an additional rocking platform (4.5 x 3 in.), as well as a 96 x 0.2ml tube/strip/plate holder for mixing PCR vessels in the “Mix” (oscillating) mode.Click Here to View Product Video INCLUDED: The Benchmark Roto-Therm Plus Incubated Rotator Variable Speed w/ Tube Holders includes: - Tube Holder, 11 x 1.5/2.0ml - Tube holder 5 x 5-7ml - Tube holder, 4 x 10-15ml - Tube holder, 6 x 50ml - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This listing is for a INOTEC CLS 24 Emergency LightingPresenting the CLS 24 system, INOTEC sets a ne (more)w trend as an innovative manufacturer of emergency lighting that reflects the market development for lighting systems and the current general situation concerning the respective regulation.The application of LED in emergency lighting, which offers great advantages in terms of longevity, applicable temperature range and energy consumption, required adaptations to the current engineering systems.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle Chamber Volume (more) 3850ELP 65L Sterilization Temperature Range 105°C to 138°C Chamber Dimensions Hei-Clean 21.7 x 23.6 x 19.7 in. Features - Efficiently cleans and dries various labware including beakers, bottles, flasks, and test tubes - HEPA-filtered forced air drying for thorough sanitization - 20 preset programs with capacity for 20 custom cycles - User-friendly color touch screen for easy operation and control - Lower spindle rack with 25 positions and 10 glassware holders - Purified water rinse and built-in water softener - Spray arm and conductivity monitoring - No plumbing required for autoclave operation - 65L chamber volume for large batch sterilization - The 3850ELP Recycles water for efficient operation Introducing the Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle—your comprehensive solution for laboratory sanitation and sterilization. The Hei-Dro Clean 165UC Glassware Washer efficiently cleans and dries various labware, including beakers, bottles, flasks, and test tubes, with HEPA-filtered forced air drying, customizable programs, and a user-friendly touch screen. It features a lower spindle rack with 25 positions, purified water rinse, and built-in water softener. The 3850ELP Autoclave, with a 65L chamber volume, operates without plumbing, recycles water, and offers 4 validated cycles and 16 custom cycles for versatile sterilization. Together, they ensure thorough cleaning and reliable sterilization for all your labware and research needs. INCLUDED: The Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle includes: - Hei-Dro Clean 165UC Glassware Washer - Tuttnauer 3850ELP Autoclave - Lower Spindle Rack W/ 25 Positions - 10 Glassware Holders - Upper Standard Rack - Purified Water Rinse - Spray Arm Monitoring - Autoclave Stand - Detergent: 023213791 - Neutralizer: 023213793 - Water Softener Salt - Chamber Brite: 023212803 - Printer Paper (Pkg. of 5): 023212200 - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Thermo Scientific 75003181 Swing Bucket Rotor, TX-400 The Thermo Scientific 75003181 Swing Bucket Ro (more)tor, TX-400, is a high-performance centrifuge rotor designed for use with several Thermo Scientific centrifuges, including the Sorvall Legend X1, Sorvall ST 16, Multifuge X1, Megafuge 16, and SL 16. With a maximum capacity of 4 x 400ml, this rotor allows for efficient processing of high volumes of samples. The swing bucket design allows for easy loading and unloading of samples, and the rotor's compatibility with multiple centrifuges makes it a versatile solution for laboratories with a range of centrifuge models. With a maximum speed of 5,000 RPM and a maximum RCF of 4,696 x g, the Thermo Scientific 75003181 Swing Bucket Rotor, TX-400, is capable of medium-speed separations, making it ideal for a wide range of applications, including molecular biology, biochemistry, and clinical research. Please Note: Adapters are NOT INCLUDED with these buckets, please inquire. INCLUDED: The Thermo Scientific 75003181 Swing Bucket Rotor, TX-400 includes: - 75003181 TX-400 Swing Bucket Rotor - Set of 4 x 75003655 Buckets - Full 1 Year Parts and Labor Warranty Thermo Scientific 75003181 Swing Bucket Rotor, TX-400 SpecificationsMaximum Speed5,000 RPMMaximum RCF4,696 x gMaximum Capacity4 x 400mlMaximum Radius16.8 cmCentrifuge CompatibilityThermo Scientific Sorvall Legend X1, Sorvall ST 16, Multifuge X1, Megafuge 16 &amp; SL 16 Centrifuges

Eppendorf 2 x 15ml Adapters, Cat. # 022639200 The Eppendorf 2 x 15ml Adapters, Cat. # 022639200 are  (more)for use with the Eppendorf A-4-38 Swing Bucket Rotor for the Eppendorf 5702/R Centrifuges. These adapters feature a capacity for 2 x 15ml conical bottom tubes each with the maximum tube dimensions (Diameter x Height) of 17.2mm x 121mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 2 x 15ml Adapters, Cat. # 022639200 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 2 x 15ml Adapters, Cat. # 022639200 SpecificationsBottom ShapeConicalRotor CompatibilityEppendorf A-4-38 Swing Bucket Rotor