Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle

This listing is for a Advantage-Lab AL02-08 Autoclave.The unit is in full working condition and is r (more)eady for immediate release.The Advantage-Lab AL02-08 is a cutting-edge, fully automatic vertical autoclave designed for superior sterilization in laboratories. With a generous 85L capacity and robust stainless steel construction, this floor-standing unit is perfect for a variety of applications, including sterilizing liquids, solid items like pipettes and filters, glassware, and even waste.Key Benefits:Versatile Sterilization: Effectively sterilizes nutrient media, buffer solutions, and various lab materials, ensuring comprehensive cleanliness.Customisable Parameters: Set the temperature between 60°C to 137°C and adjust sterilization time from 1 to 99 minutes to meet specific needs.Safety First: Equipped with a temperature and pressure-dependent door lock, it prevents accidental opening when under pressure, while a water level safety device ensures reliable steam generation.Intuitive Control: A user-friendly interface displays real-time temperature, pressure, and time, complemented by visible and acoustic alarms for added safety.Flexible Operation: With six individual programs and pre-selected parameters that remain stored until changed, operating this autoclave is efficient and convenient.Specifications:Colour: Cream White, Stainless SteelDimensions: 500 x 650 x 950 mmWeight: 125 kgVoltage: 380/400 VOperating Pressure: 0 to 230 kPa

Priorclave Autoclave Type - PS/MUA/C60 Lab This item was removed from a university where it was surp (more)lus to requirement. It is in good cosmetic condition and powers on, however it is not in working condition and is listed as Spares/Repair. It has a board/display fault.

This autoclave was removed from a university lab as surplus to requirements. We were assured the uni (more)t was in good working order when last used, but was no longer required by the lab. At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used. Type:B-QCS-54260To:BS.2646Capacity:200Maxpressure:25Serial No:2845Date:9-1-06Litres:2006Test Pressure:394Max Filling mass:100kgIntended use:SteriliseProduct group:2Design temp:150 degrees cMax Temp: 138 degrees cMin Temp: N/AVoltage: V00 50/60 8KW

MARSHALL Select MS-PA2.5UL Autoclavable Pipette, 0.1-2.5ul Volume Range 0.1 to 2.5ul Adjustable or  (more)Fixed Volume Adjustable Pipette Type Manual Air Displacement Features - Ergonomic design with a light touch plunger and relaxed finger rest reduces user fatigue - Fully autoclavable, allowing for easy sterilization - Constructed from high-quality, heat-resistant materials for durability - UV and chemical resistant to withstand harsh laboratory conditions - Centrally located digital display facilitates ambidextrous use - Quick-release pipette tip ejector simplifies tip changes - Volume lock prevents accidental volume adjustments - Compatible with universal pipette tips for versatility - Suitable for both forward and reverse pipetting techniques - Ideal for handling both low and high-viscosity liquids, enhancing versatility in laboratory procedures The MARSHALL Select MS-PA2.5UL Autoclavable Pipette is a high-performance, manual air displacement pipette designed for precision and comfort in laboratory applications. This pipette offers an adjustable volume range from 0.1 to 2.5ul with precise 0.05ul increments, ensuring accurate measurements. It features an ergonomic design with a light touch plunger and relaxed finger rest, which minimizes user fatigue and enhances comfort during extended use. Constructed from high-quality, heat-resistant materials, the MS-PA2.5UL is fully autoclavable, providing excellent protection against UV light and chemicals, ensuring durability and reliability in harsh laboratory environments. The design includes a centrally located digital display for easy viewing by both left- and right-handed users, enhancing its ambidextrous usability. Additional features include a rotating counter knob for quick volume setting, a quick-release pipette tip ejector for convenient tip changes, and a volume lock to prevent accidental adjustments. This pipette is compatible with universal pipette tips and is suitable for both forward and reverse pipetting techniques, making it versatile for handling low-viscosity liquids as well as more challenging higher-viscosity or foamy samples. The MS-PA2.5UL is the ideal choice for laboratories seeking a reliable, easy-to-use pipette that meets rigorous standards, including ISO 9001:2008 and ISO 13485:2003 certifications, along with CE marking. INCLUDED: The MARSHALL Select MS-PA2.5UL Autoclavable Pipette, 0.1-2.5ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Tuttnauer 3870ELP Lab Line Benchtop Autoclave Features - Take Advantage of Tuttnauer’s state-of-the- (more)art advanced control system with multi-color display - Intuitive Multi-color display for easier reading gives quick access to important information. Color is used to indicate the stage of the cycle - Safe Automatic pressure locking system. Door will not open when the chamber is over pressured - 316 Ti grade high quality stainless steel chamber and door with electro-polish finish - Connect to a local network for use with RPCR Software for remote monitoring of up to 8 autoclaves - The 2840EL-D autoclave comes with 8 factory set cycle programs that cover the diverse processing needs of most laboratories and research centers - internal printer allows for the printing of Documents date, time, temperature and pressure Advanced multi-color control panel features intuitive method readouts in a multitude of languages. 316 Ti grade high quality stainless steel chamber and door with electro-polish finish allows for long product life and ease of periodic cleaning Designed to save space on your laboratory workbench, the 38700EL is a front loading benchtop autoclave that provides high quality, repeatable performance and accountability for a wide range of applications used in modern laboratories. Each model has a number of optional added-value features which can be configured for fast cooling, efficient drying, biohazard and waste sterilization, Fo control, and more. The 3870EL autoclave comes with 8 factory set cycle programs that cover the processing needs of most laboratories and research centers. This model features a printer.INCLUDED: The Heidolph Tuttnauer 3870ELP Lab Line Benchtop Autoclave includes: - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 2-20ul Volume Range 2-20uL Adjustable or Fixed Volum (more)e Adjustable Volume Accuracy (±%) 0.90/1.20/3.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 2-20ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

New Brunswick Scientific U410-45 Ultra Low Temperature Freezer Lab This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition and good working order, it has been tested to its minimum temperature of -45ºc with our external thermometer reading -43.3ºc. (Not included). This item features: 4 x shelves (55x55cm)

F2-class mass standards represent an impressive level of precision in mass measurement. Classified a (more)s metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 mass standard: flat polygonal sheet Nominal value: 2 mg Material: aluminum F2 Class Mass Standards – Key Features Exceptional Measurement Precision - F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions - An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level - The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties - F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

Large-size additional display, model WWG-2, is designed as a LCD display for cooperation with RADWAG (more) scales. The display can indicate up to 6 digits each with 4,5 inches in height (11,2cm). The display is equipped with an assembly jig for hanging on a wall. Area of use: Mainly WWG-2 large size display is used as: Additional equipment for load cell industrial scales; and for Increasing scale functionality – presentation of weighing result on a large size display. Design: WWG-2 is an LCD large size display with diodes backlit in white colour. The display is placed in a stainless steel housing. Communication with a scale is realized through RS232, RS485 or optionally through Ethernet interfaces. Depending of version, the WWG-2 large size display can be powered from 230VAC or 7-24VAC. Communication through RS232, power supply 230VAC. Main application as option for terminal PUE 7 series. Maximum length of RS232 connecting cable is 10m.

THB W sensor is intended to measure temperature of liquid. THB W Temperature readout using THB W sen (more)sor is possible upon connecting the sensor directly to a computer or to the THBR Box ambient conditions recorder. THB W can be used e.g. on pipettes calibration workstation, to measure water temperature in gravimetric method, which is done in order to determine 'Z' coefficient in accordance with ISO 8655. Each sensor has its own identification number that is assigned to measurements saved to the database. Ambient conditions can be monitored using: weighing instrument display website Windows OS application: THB Single or THB Multi Android application.

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database