Hach sensION + pH1 Meter

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The BioRAPTR FRD workstation is an automated non-contact dispenser for low volume 384-well, 1536-wel (more)l, and 3456-well plates. This workstation is the next generation Flying Reagent Dispenser (FRD). It produces highly accurate and precise dispensing across a volume range of 100 nL – 60 µL without cross-contamination, fully supporting integrated high-throughput screening, stand-alone assay development applications, and reagent additions applications in pharmacogenomic research. Key to its elegant design is a dispense head that utilizes four independent fluid pathways. The BioRAPTR FRD delivers reliable, high-quality performance with remarkably low dead volumes over an adjustable dispensing range.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-24098 Bowens Esprit 500 Professional Photography Flash Head with Accessories [condition: Used]ITEM-29716 Unbranded Mechanical Stage Cross Specimen Table Lab [condition: Used]ITEM-17348 Raymond A Lamb Hotplate Lab [condition: Used]ITEM-29783 Labnet Spectrafuge 16M ITEM-21195 3 x Micro Centaur Centrifuges [condition: Used]ITEM-17226 Bieffe Padova Light Source [condition: Used]ITEM-21148 3 x Bio-Rad Power Pac [condition: Used]ITEM-21064 WPA CQ75 Chart Recorder [condition: Used]ITEM-29874 Labnet MultiGene II Thermal Cycler [condition: Used]ITEM-21080 Thermo Electron FastPrep FP120 Cell Disrupter Lab [condition: Used]ITEM-21206 Advance Electronics Voltage Stabilizer [condition: Used]ITEM-17340 Stuart Scientific Orbital Shaker SO1 [condition: Used]ITEM-21146 2 x Stuart Scientific Orbital Shaker SO1 [condition: Used]ITEM-23963 8 x Eagle UV Bank Note Checker Lights [condition: Used]ITEM-17090 Hanna Instruments HI 8417 pH Meter [condition: Used]ITEM-17344 Lot of Microscope Heads & Other Parts [condition: Used]ITEM-21065 Griffin Velocity of Light Apparatus [condition: Used]ITEM-23988 Sorvall SS-34 Rotor [condition: Used]ITEM-21061 Philip Harris Classroom Laboratory Joulemeter Lab [condition: Used]ITEM-29717 Nikon Phase Contrast Condenser [condition: Used]ITEM-29622 Job Lot Axon Instruments [condition: Used]ITEM-17178 Lathe Faceplate 40cm Diameter [condition: Used]ITEM-19090 BIO-RAD Screen Eraser - K Phosphorimager Lab [condition: Used]ITEM-21152 Heraeus #3335 Centrifuge Rotor [condition: Used]ITEM-17360 Grant GD100 Laboratory Water Bath Lab [condition: Used]ITEM-23989 Sorvall SS-34 Rotor [condition: Used]ITEM-17088 Kodak Darkroom Lamp [condition: Used]ITEM-21181 5 x Audio / Sound Dual Channel Passive Direct Injection Boxes [condition: Used]ITEM-17293 Lot of Monitor Brackets [condition: Used]

Scilogex DS-160/10 Generator Probe for D-160The Scilogex DS-160/10 Generator Probe for D-160 has a d (more)iameter of 10mm x length 120mm for solid/liquid media volumes from 1-250ml. To be used with D-160 Homogenizer. INCLUDED: The Scilogex DS-160/10 Generator Probe for D-160 includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Jenesco FM-1 Ozone Generator The Jenesco FM-1 Ozone Generator is designed for residential applicatio (more)ns for use in eliminating tough odors and our least expensive machine for shock treatments of mold and mildew. Its high output (2000 mgph) is more than sufficient to attack mold and mildew, viruses and spores. The FM1 uses 2 laser cut silicone composite plates with stainless steel grids, to produce the maximum ozone output using ambient air as the source gas. They can easily be removed for cleaning, by merely removing a single thumb screw. The FM1 has coverage of up to 3500 sq feet for odors, 500 sq feet for mold. The ozone output is 2000 mgph (milligrams per hour) when used at normal air humidity of 60%. Electrical: 120VAC, 40W, 2A. Made in the USA.INCLUDED: The Jenesco FM-1 Ozone Generator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The G 7883 washer-disinfector is suitable for reusing laboratory glassware for analytical experiment (more)s in, for example, industrial, environmental and research laboratories. This appliance has a large two-tier wash area and can be built-in under a continuous worktop or used free-standing. After an intensive main cleaning phase, disinfection takes place at >90°C and a storage time of 5 minutes. The final rinse is performed with deionized water without rinsing agents. Control/programs: Multitronic Novo Plus control (certain process parameters can be changed), with 10 standard cleaning programs Program operation/display: Operation via one-button program selector, display of program cycles, display of temperature and program duration, display of program end, optical and acoustic signal, indicator lights for service and fault messages Cleaning mechanisms: Rotating: two spray arms on top and bottom of the chamber, third spray arm on top basket. Dosing devices: Valve dispensers for powdered detergent and liquid detergents. Circulation pump: 400 l/min Temperature: Freely adjustable up to 93°C Drain: 1 drain hose Drying capacity: Gravity convection drying system, 10 minutes. Can be turned on or off in any cycle Water connection: 1x hot water, 1x cold water, 1x purified water Dimensions (WxDxH): 600 x 600 x 850 mm Weight: 74 kg

Formulatrix Tempest V.2 Liquid Handler with Pumping Box This item was removed from a university labo (more)ratory where it was surplus to requirements. The liquid handler and pump box are in good cosmetic condition, and power on. The previous client has reported that the system is not in working order, as it requires a PF shared control valve (Mantis CF solenoid). Due to the client's statement, this system is listed as Spares/Repair. Software and a compatible computer are required for operation. Components:- Formulatrix Tempest V.2 - Serial No.: 0117 - Pump Box V2.1 - Serial No.: 0169 Includes:- 18 x Silicone Nozzle Strip-HV 0.35mm (PN: 207459_A) - 7 x Silicone Nozzle Strip-HV 0.15mm (PN: 204694) - 7 x Low Volume Silicone Chips (Volume 1 µL & 0.2 µL) - 1 x High Volume Silicone Chip (Volume 5 µL & 1 µL) - Tube connectors - 2 x Holders

This was removed from a university lab where it was surplus to requirements. The lab informed us tha (more)t it was in use until December 2022 and was fully serviced by Waters up to Feb 2023. All modules are in excellent cosmetic condition with only minor marks from use. Included are; 1 x Waters Sampler ManagerPart Number: 186016007S/N: J10NPS 788M The unit powers up but we were unable to test it further at our facility. This unit does include 2x part number 418000179 vile trays.  1 x Waters Binary Solvent ManagerPart Number: 186016002S/N: H10NPB 923NThe unit powers up, the flow light flashes red, green, and then turns off. We were unable to test it further at our facility. 1 x Waters Auxiliary Solvent ManagerPart Number: 186016021S/N: H10NPA 505NThe unit powers up but the flow light does the same as the binary manager. We were unable to test it further at our facility. There is also a network switch on the top of the stack. It is untested. It comes with 5x sealed bagged "nano inlet filter 5 micron", part number: 289002172 with dates on the bags ranging from 2011 to 2020. A set of bagged tubes that are labelled as "solvent aux".

Yamato BO-302-A Digital Oil Bath 5L, 100-115V Water Tank Capacity 5L Operating Temperature Range  (more)Ambient +10-180°C Temperature Accuracy ±2°C Features - White LED digital display, key entry, minimum digit of 1°C - Flat-shaped bath with no heater or sensor inside makes for ease in cleaning - Full range of safety functions - Includes automatic overheat prevention - Comes with 1 Year Manufacturer's Warranty

Benchmark Heat Block, 24 x 1.5ml Conical The Benchmark Block, 24 x1.5ml centrifuge tubes (conical) i (more)s for use with any Benchmark Dry Baths. INCLUDED: The Benchmark Heat Block, 24 x 1.5ml Conical includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty