Guardian 7000 Ohaus

Sample preparation stirrer OHAUS Guardian 7000 Magnetic Hotplate Stirrers are designed with exceptio (more)nal safety features and top performance for every application. All models feature the unique SafetyHeatTM, an industry-leading internal protection system that ensures safety in heating applications through dual system integrity monitoring. The bright LCD display features intuitive icons, temperature, speed and duration settings, all designed to monitor performance from every corner of the lab. Numerous cutting-edge Ohaus features: - SmartHousing ™: Innovative chemical resistant, easy to clean design that allows you to channel potential spilt liquid samples away from internal components and the glass control panel. - SmartPresence ™ and SmartLink ™: they automatically turn off the heater if no user is detected after the 'time out' period set by the user or if the bluetooth no longer detects any smartphone connected. - SafetyHeat ™: two independent safety controls constantly monitor the electronics and turn off the heating to prevent overheating. - Powerful Motor: A solid magnet and software-controlled ramp speed ensure stirring accuracy from 60 to 1,600 rpm. for secure magnetic coupling for viscous applications. - SmartHeat ™ and SmartRate ™: set the maximum unit temperature and rapid or slow rates of temperature and speed change. The scheduling function allows the storage of five multi-stage programs. Available models: E-G71HS07C model with small square plate: 178 x 178 mm; flow rate of 15 litres; ceramic plate; heating up to 500°C. E-G71HS10C model with large square plate: 254 x 254 mm; flow rate of 18 litres; ceramic plate; heating up to 500°C. e-G71HSRDM model with round plate: 135Ø mm; flow rate of 20 litres; aluminium plate; heating up to 380°C. Applications Thermosensitive chemistry and biology, heat fixation, solution pH optimization, solution sterilization, endothermic reactions, denaturation of organic material, preparation of samples and solutions, buffers and solubilization reagents, preparation media, boiling Display Backlit LCD display for temperature, speed and time, green indicator lights during the heating and shaking phases, hob over-temperature indicator, icons for SmartRateTM, SmartHeatTM, SmartPresenceTM, SmartLinkTM, probe in use and Adjustment of a single point Operation and accessories included Mains cable (included), 20.3 cm (8 ') stainless steel RTD temperature probe, 3.8 cm (1.5') PTFE coated stir bar, protective hood in use Communication The USB port can be used to program repetitive applications and increase safety thanks to SmartLinkTM technology; the long-range user detection function operated via the OHAUS Bluetooth dongle accessory (sold separately) Structure Probe connection, SmartHousingTM is heat insulated and chemical resistant, IP21 rated, tempered glass front panel, control knobs, On / Off switch to disconnect the heater, integrated support rod holder, ceramic plate or in aluminium easy to clean Construction features Temperature indicator light, audible alarm, SmartHeatTM temperature limitation function, SafetyHeatTM stops the heater in the event of a malfunction, temperature calibration function for five probes and five plate setpoints, temperature priority function, SmartRateTM functions

Number of stirring positions: 1 Stirring quantity max. per stirring position (H2O): 15 l Maximun loa (more)d: 20 kg Speed adjustment: scale 0 – 6 Speed range: 100 – 1500 rpm Stirring bar length max: 80 mm Self-heating of the set-up plate by max. stirring (RT:22°C/duration:1h): +1 K Heating temperature range: 50 – 500°C Heat control: Turning knob Temperature setting resolution of heating plate: 5 K Connection for ext. temperature sensor: PT1000 (not included) Fixed safety circuit: 550°C Set-up plate material: ceramic Set-up plate dimensions: 260 x 260 mm Heating rate (1l H2O in H1500): 5 K/min Dimensions (WxHxD): 300 x 105 x 415 mm Weight: 8.308 kg

Continuous or touch mode operation Can be used at 4 to 40°C (maximum 85% relative humidity, non-cond (more)ensing), in an incubator, CO₂ incubator or cooling room The pulsating model has a unique effect that reduces heat development and ensures efficient mixing and disruption Shaking motion: Orbital Circular movement: 4.9 mm Speed ​​range: 300 – 2500 rpm Dimensions (WxDxH): 112 x 178 x 135 mm Weight: 4.1kg Equipped with foam insert for 8 tubes of Ø 14 mm and 8 tubes of Ø 19 mm.

Nominal volume flow: 790 m³/h Dimensions (WxDxH): 1800 x 750 x 1100 mm

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

SCILOGEX SCI120-S LED Digital Dry-Bath, Single-BlockThe SCILOGEX SCI120-S LED Digital Dry Bath is id (more)eal for molecular biology, histology, clinical, environmental and industrial laboratories, including melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood-urea-nitrogen determinations and in-situ hybridizations. With a low profile and space saving design, control of temperature and time is displayed in real-time with clear independent displays. Various high grade aluminum blocks are available for common tube sizes providing excellent temperature uniformity from ambient +5 to 120°C. Product Features - Easy-to-read LED displays - Continuous and timer functions - Real-time independent displays of temperature and time - Over temperature safety protection - Various high quality aluminum blocks (15 x 9.5 x 5cm) for common tube sizes, 0.2, 0.5, 1.5/2.0, 5/15, 50 mL - See through cover included INCLUDED: The SCILOGEX SCI120-S LED Digital Dry-Bath, Single-Block includes: - Block - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Loopster Digital Shaker Type of Movement Rotating Speed Range 5 to 80 RPM Tilt Angle Max. 90° F (more)eatures - Freely adjustable rotary angle - Timer: Countdown, adjustable from 1 s to 99h 59min - Counter: Display of shaking time - Different attachments allow a variety of applications - Usable at 4 to 50 °C in incubators - Error code display - Easy operation by foil keypad - Suitable for continuous operation - Speed range: 5 - 80 rpm Digital rotator for smooth but effective mixing with adjustable speed. Ideal for biological samples, particularly blood samples. Suitable for separating and mixing processes of powdered and liquid samples in Eppendorf tubes and Greiner tubes up to 50 ml. The easy removable attachments allow simple and quick cleaning of the unit of spilled samples. The rotator features a freely adjustable rotary angle and a countdown timer adjustable from 1 second to 99 hours and 59 minutes, with a display for shaking time. Different attachments allow a variety of applications, and the unit is usable at 4 to 50 °C in incubators. It also includes an error code display, easy operation via foil keypad, and supports continuous operation. The speed range is 5 - 80 rpm, adjustable in 1 RPM steps with a 7-segment LED display.