Gilson F171601 PIPETMAN DIAMOND Tips DL1200ST, 100-1200uL

Eppendorf 250ml Bottle Adapters for S-4-104, Cat # 5825741005 Eppendorf 250ml Bottle Adapters for S- (more)4-104, Cat # 5825741005. New in box 250mL conical tube capacity for the Eppendorf S-4-104 rotor in Eppendorf 5810/5810R centrifuges. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 250ml Bottle Adapters for S-4-104, Cat # 5825741005 includes: - Full 6 Month Parts and Labor Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato WE-200 Pure Line Type 1 Water Purification System, 100-240V Pure Water Delivery Rate ~0.5 to (more) 1L/min Final Filtration 0.1μm Membrane Filter Water Quality Display Conductivity/Resistivity/Temperature Features - Suitable for high sensitivity trace analysis - Lower running cost - By adopting reverse osmosis (RO) membrane cartridge set, life span of consumables has been expanded significantly - Benchtop type, space saving - Easy water sampling by attaching to water faucet - Easy to operate digital display - Displays replacement of consumables and its exchange history - Standard equipped with membrane filter to protect pure water production from contamination - Electromagnetic valve equipped at sampling water port for leakage prevention - Universal power supply: works with 100-240VAC The Yamato WE-200 Pure Line is a benchtop water purification system which features an integrated reverse osmosis membrane cartridge to increase the life span of all consumables significantly. The standard equipped membrane filters additionally protect pure water production from contamination. It displays alerts for consumable replacements and keeps track of replacement history. The WE-200 produces ASTM type 1 deionized water and is suitable for high sensitivity analysis. INCLUDED: The Yamato WE-200 Pure Line Type 1 Water Purification System, 100-240V includes: - Supply & Drain Water Hoses - Pre-Treatment Cartridge - Reverse Osmosis (RO) Membrane Cartridge Set - Membrane Filter - Seal Tape - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap DNA Acid-Resistant RotorEasilyinterchangeable PTFE-coated aluminum rotors with PT (more)FE hubs hold tubes at anangle to maximize surface areas. INCLUDED: The Labconco 7462901 CentriVap DNA Acid-Resistant Rotor includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

System consists of: Dionex UltiMate 3000 Degasser Dionex UltiMate 3000 Pump Dionex UltiMate 3000 Aut (more)osampler Dionex UltiMate 3000 Column Compartment Dionex UltiMate 3000 Diode Array Detector PC

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. CONSTRUCTION - Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. - Special insulation for high temperatures (800°C) with high density 300 Kg/m3 calcium silicate and mineral fiber panels (Fibroceramic free) fixed with ceramic adhesives. - Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CARATTERISTICHE - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass plug. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges AUTOMATIC FIRE EXTINGUISHER The automatic fire extinguishing system works by detecting the presence of fire and controlling the discharge of extinguishing media so that the damage caused by the fire is minimized. The automatic extinguishing system includes a fire detection system, an extinguishing control unit and condensed aerosol generators. Information on the front panel display facilitates programming and simplified use. The possibility of programming the delayed activation of the sirens, or the time and duration of the extinguishing system make the unit very efficient and flexible. HOW DOES IT WORK? In the event of a lithium battery fire, the automatic fire extinguisher suppresses the fire and neutralizes the decomposition products of the electrolyte such as Hydrogen fluoride (HF), forming stable products such as KF and KHF2. The neutralizing action prevents the formation of highly flammable gases, such as hydrogen (H2), bringing the internal temperature down below the threshold necessary for a new fire to break out. Constituent parts of the fire fighting system: - LPCB certified according to EN 12094-1 and EN54.2 and 4 - Fire detection and automatic extinguishing - Graphic display 128 x 64 pixels - Fire extinguisher button on front of unit - Key switch for switching off mode selection: manual only or manual and automatic - 3 siren outputs - Power supply with 3A - Low absorption at rest: only 40mA - Inputs and outputs for remote function control - Extinguishment stop button and extinguishing cancel button - Storing of data events - RS-485 for remote connection In the image the focus on the internal FBN fire extinguisher. Recommended accessories: - Charging points: 4x10 sockets. Contact us for more information.

IKA Plate PackageThe IKA Plate (RCT digital) has a round top made of aluminum alloy. It stirs volume (more)s of up to 20l (H2o) and runs at speeds ranging from 50-1500rpm. Some of the features are: IKA emphasizes ease-of-use by design simplicity: reduced forms and operating elements meet the modernity of smartphones: IKA not only focuses on hardened glass because of visibility, chemical resistance and safety, it also optically changes the game of a magnetic stirrer with a glass surface. The IKA Plate (RCT digital) improves over time with regular firmware updates. Using Alnico magnetic technology, the IKA Plate (RCT digital) achieves excellent temperature stability and high residual induction. It also provides for maximum vortex. The integrated timer and counter function supports the control of kinetics and sensitive reactions; the IKA SmartTemp® function protects users intelligently and predictably. Automatic switch-off of the magnetic stirrer if the connected external temperature sensor is not immersed in the medium. Function selectable, timeout time adjustable (Error 5). PT 1000.60 temperature sensor included in the scope of delivery.INCLUDED: The IKA Plate Package (IKA Plate, H38 holding rod, H16V support rod, H44 boss head clamp) includes: - H 38 Holding rod - H 16 V Support rod - H 44 Boss head clamp - PT 1000.60 Temperature sensor, stainless steel - Two Year Manufacturer's Warranty

Eppendorf Swing Bucket A-4-38 Rotor Eppendorf Swing Bucket A-4-38 Rotor, never used, new in box. Cat (more). # 022639064. This rotor can accommodate 4 x 85/90ml buckets and use multiple adapters. The Eppendorf Swing Bucket A-4-38 Rotor is for use in the Eppendorf 5702, 5702R, and 5702RH Centrifuges. INCLUDED: The Eppendorf Swing Bucket A-4-38 Rotor includes: - Full 1 Year Parts and Labor Warranty Eppendorf A-4-38 Rotor SpecificationsMax Speed4,400 RPMMax RCF3,000 x gMax Capacity4 x 7mL 4 x 10mL Volumes up to 100mL

Benchmark Analog Magnetic Stirrer Benchmark stirrers feature an exceptionally durable, chemical resi (more)stant white ceramic work surface. Their space-efficient design (8 x 9 in. footprint), makes them ideal for use on crowded benchtops and inside of bio-hoods. Advanced microprocessor controls with convenient turn knobs allow quick, precise adjustment and maintenance of speed. Safety indicator LED’s on the front panel indicate when the stirring function has been activated. With a square 7.1 in work surface, this stirrer is compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles and other vessels. INCLUDED: The Benchmark Analog Magnetic Stirrer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

-Helos/BR- HELOS/BR is the shortest model version of the instrument family and finds room on every l (more)aboratory table. It integrates up to 5 optical modules for a measuring range from below 0.1 µm to 875 µm. A multitude of measuring tasks are fulfilled reliably and offers measuring confidence even to the coarser particle range. -Vibri- A constant sample mass-flow is of decisive importance for powerful dry dispersing. The controlled vibratory feeding unit VIBRI, equipped with a built in amplitude controller feeds dry powders from 1 mg to 1,000 g constantly and independent of the load in the VIBRI funnel. -Rodos/M- The classic RODOS with manual adjustment of the dispersion parameters is ideally suited for individual product applications and applications where the measuring parameters remain constant. The precisely reproducible measurement conditions of flash dispersion form the basis for reliable, repeatable measurement results. Simple access to parts that are in contact with the product – particularly the dispersing line – permits quick and easy cleaning and maintenance by the user. -Aspiros- If only small quantities of valuable products or toxic material from a few to 1,000 micrograms are to be analysed, the micro-dosing device ASPIROS can be applied. Size range: 0.1 µm – 875 µm Sample amount: < 1 mg – 1 g Sample volume: 650 µl