Gilson DISPENSMAN 50mL

12 x Packs of 10 Lonza Reagent Reservoirs CN 00190035 These were removed from a university lab wher (more)e they were surplus to requirements. The units are brand new and sealed. Expiry dates are as follows: 21st September 2025, 25th April 2025

Benchmark Heat Block, 24 x 1.5ml Conical The Benchmark Block, 24 x1.5ml centrifuge tubes (conical) i (more)s for use with any Benchmark Dry Baths. INCLUDED: The Benchmark Heat Block, 24 x 1.5ml Conical includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo DYNEO DD-BC26 Heating Circulator, 115V/50-60Hz Working Temperature Range 20°C to 200°C Heati (more)ng Capacity 1000W Fluid Type Water, Silicone Features - Suitable for internal and external applications - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - High-quality thermal insulation of the bath tank The DYNEO™ heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank for temperatures to 200°C. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. Systems include insulated stainless-steel tanks with an integrated drain valve. Features a color TFT display with central rotary knob controller, multi-lingual interface, integrated programmer, Pt100 port for external temperature control. USB connection for external PC control and data-logging; Digital option includes RS232 port; analog option includes analog interface for voltage or current control. PID temperature control provides ± 0.01°C stability. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo DYNEO DD-BC26 Heating Circulator, 115V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

RS 232 cable: weighing device (HRP, MWSH, MWLH) – terminal HY10, PUE5. Cable length: 10 m Opti (more)onal cable length: 2 m or 5 m other price) Compatible with: HRP platforms MWSH weighing module MWLH weighing module

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: -5°C to 100°C Temperature fluctuation (at 37°C): ± 0.1 K Temperature fluctuation  (more)(at 40°C): ± 0.1 K Temperature uniformity (at 5°C): ± 0.6 K Temperature uniformity (at 25°C): ± 0.2 K Temperature uniformity (at 40°C): ± 0.3 K Warming up time (to 40°C): 5 min Cooling down time (fromt 40°C to 5°C): 58 min Recovery time after door was opened for 30 sec (at 5°C): 4 min Recovery time after door was opened for 30 sec (at 40°C): 1 min Maximum load: 40 kg Maximum load per shelf: 15 kg Capacity: 53 L Dimensions (WxHxD): 635 x 835 x 580 mm Interior dimensions (WxHxD): 400 x 400 x 330 mm Weight: 72 kg

This listing is for a Zebra TLP 3842 Printer.The unit is in full working condition and is ready for  (more)immediate release.The Zebra TLP 3842 is a thermal transfer barcode printer designed for high-quality printing of labels, tags, and barcodes. Its advanced technology ensures clear, precise output, making it ideal for various labelling needs.Key Specifications:Print Resolution:300 dpi resolution allows for high-quality graphics and small text, ensuring legibility and detail.Print Width:Supports a maximum print width of 4 inches, accommodating a range of label sizes.Connectivity:Equipped with multiple interfaces: Parallel, Serial, and USB, providing flexible connectivity options for different setups.Memory:512 KB RAM and 1 MB Flash memory support efficient processing and storage of label formats and graphics.Power Supply:Comes with a U.S. power supply; a dispenser option is also available for added functionality.Real-Time Clock:Note that the printer does not include a real-time clock, which may be relevant for time-stamping labels.Applications:Prescription Bottle Labelling:Ideal for pharmacies requiring accurate and clearly printed labels for medications, ensuring compliance and safety.Laboratory Specimen Labelling:Perfect for labs needing to label samples and specimens clearly, minimizing the risk of mis-identification.Electrical Component and Mechanical Part Labelling:Useful in manufacturing settings for labelling parts and components, aiding in inventory management and traceability.

Benchmark LC-8 3500 Centrifuge Benchmark’s LC-8 series of laboratory centrifuges is uniquely designe (more)d to meet a wide range of applications in both the clinical and research laboratory. An eight position rotor is included and designed to directly accept 10ml and 15ml test-tubes (conical or round bottom), while optional adapters are also available for use with all popular sizes of blood collection and culture tubes. Unlike most compact centrifuges in this class, the rotor can be easily removed from the chamber for cleaning. The back-lit, liquid crystal display provides full control over the set run time and rotational speed. The rotational speed can be set/viewed in rpm or rcf and acceleration/deceleration levels can be easily adjusted in the advanced settings mode. To ensure safety, the digital microprocessor ensures that the lid has been closed and that the safety lid lock is engaged prior to starting a centrifugation cycle. In addition, an advanced imbalance detection system constantly monitors the balance and vibration, automatically bringing the rotor to a stop if an imbalance is detected. INCLUDED: The Benchmark LC-8 3500 Centrifuge includes: - 8 x 15ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus mini vortex stirrers OHAUS mini vortex mixers are available in four models, for reliable, gent (more)le, and high-speed mixing. Fixed speed, analog, digital and pulse models. Fixed Speed: Economical choice for vigorous, high-speed, one-touch mixing for repeatable applications. Analog control: adjust the speed as you want, you don't need precise repeatable results; speed control knob with graduation marks between 1 and 10. Digital control: adjust the speed easily and precisely, for repeatable results; control via LED display for speed and time, with buttons for adjusting the default values. Pulse vortex: pulse action that reduces heat generation, ensuring effective cell mixing and fractionation; control via LED display for speed and time, with buttons for adjusting the predefined values ​​and button for impulse control. - In tactile mode, mixing is activated by pressing the cupped head, while the continuous mode allows the use of accessories. The sturdy and stable structure ensures that the unit remains in place during use. - Rugged digital and analog vortex mixers allow for effective speed control, from low-rpm starting for gentle shaking to vigorous, high-speed vortex mixing of samples. Applications Resuspension fluids, mixing reagents, buffers and emulsions, ELISA tests, drug extractions, mixing samples Display Digital Models: Independent LED displays with speed and time information that allow the operator to view both settings simultaneously. Analog Models: Marked knobs for variable speed control. Operation Detachable three-wire cable and plug (included) Communication N / A Structure For all models: Accessory platform of about 7 cm with cup head for beakers, flasks, test tubes, etc ... For pulse model: holder for 12 stainless steel microtubes. Construction features Digital Models: Integrated chip control maintains set speed for constant mixing. Not sure which agitator to choose? Download the Vortex Shaker Selection Guide to get a quick overview of all available models.

RADWAG-manufactured AVK-1000 automatic vacuum mass comparator is intended for national metrological  (more)institutes that transfer and maintain the national reference mass standard of 1 kg. The comparator is intended for weighing mass standards and silicone spheres of 100 mm diameter. It enables comparison of up to 6 prototypes of max 1kg mass. The repeatability of the process is of 0.3 µg and readability of d = 0.1 µg. A specially designed vacuum chamber enables carrying out measurements in a vacuum of 10-6 mbar capacity or in atmosphere containing noble gases. AVK-1000 is equipped with suspended weighing pan that eliminates eccentricity errors. Standard version of the mass comparator features thermo-hygro-barometer for testing ambient conditions with great accuracy: pressure of 0.001hPa, humidity of 0.01% and temperature of 0.001 °C. The comparator is also equipped with high quality vacuum gauge. The AVK-1000 vacuum mass comparator can be equipped with the LOAD LOCK system for carrying mass standards. The system enables switching or adding artefacts without changing the atmosphere inside the main chamber. With the use of a special chamber for mass standards switching the whole process is 90% shorter. During mass standards replacement carried out without the use of the LOAD LOCK system, the air enters the main chamber of the mass comparator. After each opening of the chamber it is necessary to pump the air out in order to obtain required vacuum value. The vacuum mass comparator needs approx. 48 hours in order to obtain vacuum that ensures measurement repeatability. The LOAD LOCK is equipped with a high-efficiency pump system, the time of pumping the air out in order to enable opening of the valve of the main chamber is significantly shortened. The stabilization of the main chamber after replacing/adding the mass standard and closing the valve connecting the main chamber and the LOAD LOCK system takes 5 hours. The high-quality vacuum gauges enable monitoring and comparing the vacuum value in order to determine the moment when opening the valve again and replacing the mass standard is available. A specially designed viewfinder enables monitoring of the process. The LOAD LOCK enables switching objects of dimensions adapted to the AVK-1000 mass comparator: cylindrical mass standards of 22-95 mm diameter and silicone spheres of 40-100 mm diameter. Supplementing the AVK-1000 vacuum mass comparator with LOAD LOCK system significantly improves the comparison performance.