FIRE 60 BASIC CHEMISAFE

CABINET FIRE Series MY11 Gray 60 BASIC - CHEMISAFE - Entirely made of 1 - 1.5 mm thick electrogalvan (more)ized sheet steel, cold bent - Gray RAL 7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to standard 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded cabinet - Adjustable leveling feet - Door with lock and key - 3 shelves in painted steel (BASIC series) or in stainless steel (EASY series) adjustable in height, 1 retention tray with grid - Shelf fixed with aluminum pins, excluding all risk of sparks - Shelves tested for fire resistance - ISO 3864: Signs with pictograms - Certified with fire resistance 90 minutes, according to the EN14470-1 BV standard (Bureau Veritas) - Certified according to the EN16121 BV standard (Bureau Veritas) - Easy replacement of spare parts in case of damage - Available in the version with double capacity and external dimensions WxDxH: 200x600x1950mm Supplied: - 3 painted steel shelves (max load 60 kg evenly distributed) + 1 pan with grid (capacity 20 litres) - Door hinge on the left, on request on the right Optional: - Shelves - Timer - Open door alarm - Ventilation - Electric aspirator - Activated carbon filter - Cooling system - Internal carbon dioxide system with automatic thermal activation (62°C)

This unit was removed from a chemistry lab as surplus to requirements. The lab assured us it was in  (more)full working order prior to removal - but we have only tested it to power-on ourselves.

This Thermo Shandon Pathcentre PCB Enclosure was removed from a university lab where it was surplus  (more)to requirements. The unit is in reasonably good cosmetic condition. It powers up but due to the alarm sounding with Code: Error23 present we are unable to test it further at our facility, and it is sold as Spares or Repairs. Error 23 is a power supply issue. System includes the following: 1x PathcentreC/N: 75210007 issue 36S/N: PC1572E0202 1x PCB EnclosureC/N: 75210044 issue 10 1x CommandC/N: 75210012S/N: 1550

Showcases of gases FHX Series. Models: FH1000X (width 1 m), FH1200X (width 1.2 m), FH1500X (width 1 (more).5 m), FH1800X (width 1.8 m). Active carbon filter or HEPA filter (to choose) and/or extraction to the outside. Negative pressure. Flow rate adjustable from 0.3 to 0.8 m/s. Compensation of air to prevent turbulence. Front Panel machining with foot pedal actuator. Walls reinforced glass. Steel frame with painting antibacteria. Work surface with phenolic resin. Stack, faucet, gas outlet and plug interior. Alarm end of its useful life filter. LED Display digital. Low level of noise. LED lighting and germicidal light. The price shown corresponds to the mboth FH1000X (width 1 m). For other models refer to drop-down. Biobase FHX Series Fume Hoods are high-quality equipment designed to provide a safe and contaminant-free environment in laboratories and research settings. Their compact and robust design ensures reduced space usage and excellent protection against toxic fumes and gases thanks to their active carbon filter, thus avoiding any risk to the user's health. In addition, they feature intuitive and easy-to-use controls, allowing the extraction speed to be adjusted according to the specific needs of each experiment. In short, Biobase FHX fume hoods are a reliable and efficient option to ensure safety and well-being in laboratory environments.

Heating thermostat from 30°C to 250°C for professional thermostats LAUDA PRO is a cutting-edge produ (more)ct line, designed to be the laboratory tools of the future. A significant innovation was the division between thermostats dedicated to internal applications and those dedicated to external applications. Then, the choice of offering products with tanks of a few liters allows the operator to quickly reach the desired temperature. New criteria have also been adopted for the design of the control panels. Two operational approaches are available, Basic, with OLED screen and essential but professional features, and Command Touch (named 'C'), the ultimate in the LAUDA experience, with touch display, graphic displays and numerous functions. In either case, the control panel can be removed from the thermostat for maximum operational flexibility and a noticeable decrease in instrument height. All thermostats are equipped with an Ethernet, USB interface and a Pt100 connection as standard. Cooling thermostats are also available with natural refrigerants. In addition, as standard, they are equipped with a cooling system that allows a lowering of the thermostat temperature with water. Notable features - Removable control panel for remote control - Stainless steel bathtubs (insulated with handles and drain tap) - 8-stage LAUDA Vario internal pump - Ethernet interface, USB and Pt100 connection as standard - Drain cock on the front of the device Accessories included Tank covers, pipe fittings with screw caps for the cooling coil Graph of heating performance of PRO P LAUDA thermostats.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Tecan MultiCheck for Infinite F50 - QC Tools and Megellan Software This was removed from a universi (more)ty lab where it was surplus to requirements. Items are in excellent cosmetic condition and appear to be unused. The software on the memory stick was tested and found to be working as intended - the first stages of set-up were completed without issue. 1x Test microplate absorbance reader1x 4 GB memory stick with Multicheck Infinite F50 Software1x Instruction booklet1x Sealed envelope1x Metallic sponge-lined carrying case

Yamato WC-301UVR Auto Pure Remote Dispense Type 1 Water Purification System with UV Oxidation Lamp,  (more)120V Configuration Remote Dispense Flow Rate (Typical) 2.5L/min (0.67 gpm) Resistivity 18.2 MΩ-cm Features - 2.5 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Intuitive, user-friendly touch screen interface - Large capacity, low cost consumable cartridges - Replacement cartridges are fresh and made in the USA with a 1 year shelf life - Compact design - Real time quality monitoring with leak detection - Quick change, cartridge – no tools needed - Premium quality ion exchange resin Compact design, remote dispense configuration water purification system in 120V with UV oxidation lamp that produces Type 1 deionized water. Low cost of ownership. Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals, and ultraviolet light for bacteria sterilization and TOC reduction. As water exits the system, a final filter removes particulates and bacteria to reach Type 1 water specifications. INCLUDED: The Yamato WC-301UVR Auto Pure Remote Dispense Type 1 Water Purification System with UV Oxidation Lamp, 120V includes: - Drain fitting – ¼ MNPT x HB - 6 Feet of 3/8” OD Tube for Inlet - 6 Feet of 3/8” Hose for Drain Connection - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IN30plus Natural Convection Incubator 32L, 115V Setting Temperature Range +20 to +80°C Conv (more)ection Type Natural Convection Chamber Volume 32 L (1.1 cu.ft.) Features - 32 L (1.1 cu.ft.) stainless steel chamber for efficient and durable sample storage - Precise temperature control with an adjustable range from +20°C to +80°C, ensuring consistent performance even 5°C above ambient - Dual Pt100 sensors in a 4-wire circuit deliver reliable monitoring and safety redundancy - Intuitive ControlCOCKPIT with TwinDISPLAY and adaptive PID-microprocessor controller for enhanced user experience - Natural convection for uniform temperature distribution, perfect for sensitive applications - Electronically adjustable air flap provides optimized pre-heated fresh air admixture for sample protection - Maximizes productivity with a chamber load capacity of 132 lbs, supporting heavier samples - Built-in AutoSAFETY and autodiagnostic systems ensure worry-free operation and advanced protection The Memmert IN30plus Natural Convection Incubator 32L, 115V offers precise and reliable temperature control for sensitive sample incubation. With a setting temperature range of +20°C to +80°C and working capability 5°C above ambient, this compact 32 L stainless steel chamber is ideal for a variety of laboratory needs. Equipped with dual Pt100 sensors in a 4-wire circuit, it ensures accurate monitoring and safety through redundancy. The TwinDISPLAY ControlCOCKPIT with an adaptive PID-microprocessor controller provides intuitive user control, while the natural convection system ensures uniform temperature distribution throughout the chamber. Designed for efficiency and user convenience, the incubator features an electronically adjustable air flap for the precise admixture of pre-heated fresh air. With a maximum chamber load of 132 lbs, it supports high-capacity sample handling. The Memmert IN30plus also includes advanced safety features, such as AutoSAFETY, an overtemperature monitor, and an autodiagnostic system, ensuring continuous and secure operation. This high-performance incubator is a dependable solution for labs seeking consistent results and easy operation. INCLUDED: TheMemmert IN30plus Natural Convection Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.