Biobase FHX Series

ECO G Lauda Series - Refrigerated Thermo-Cryostats LAUDA ECO G cryostats offer reliable technology a (more)nd modern design for temperature ranges from -50°C to 200°C depending on the models. Microprocessor management and integrated cooling system. Gold control heating head (TFT color graphic display and graphic illustration of temperature profiles), with 5 programs and 150 segments each, equipped with mini USB interface. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Examples of specific applications - Sample preparation in chemistry and pharmacy - Functional tests of electronic components - Bearing tests - Beer forcing test - Valve tests - Stress tests - Bending test - Expansion test - Semiconductors Notable features - PID microprocessor management - TFT graphic display with graphic representation of temperature profiles - Alphanumeric navigation menu - Overtemperature protection - Protection class III for operation also with flammable liquids - Pump adjustable to 6 levels - Front adjustment of the external/internal pump power without removing the control unit - USB interface - Possibility to upgrade with various interfaces - Possibility of upgrading with Pt100/LiBus for external control via console - Programmer with 150 segments for 5 programs - Integrated programmer with up to 20 segments - Standard pump connectors - Steel tub - Drain tap Graph of cooling performance of ECO Gold LAUDA cryostats. Performance graph of the pump pressing on the six levels.

KK - DURABLE AND HIGHLY CUSTOMIZABLE The KK 500 FIT DS allows the operator to precisely set the temp (more)erature and humidity inside the chamber, as well as control and monitor the light intensity. You can set the temperature from 0°C to 60°C (with the lights off) or from +10°C to +50°C (with the lights on) and thanks to an ultrasonic humidifier, adjust the humidity from 30% up to 90%. The wording 'DS' (Door-Side) indicates that the fluorescent lamps are installed in both the lateral walls and the door. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART PRO control panel is among the most complete you can find on the market. You can manage the instrument and day/night conditions with control of light intensity in an instant, with the large touchscreen. You will save your temperature, humidity and light programs and download the event log, for a professional and precise workflow. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Durable. Tailored. Tailored? Yes! Light panels are made to your specifications, with a range of different wavelength LED options available. As standard, for the KK 500 FIT DS, fluorescent lamps (white light 840 - continuously adjustable) are installed in the side walls and in the door. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm Presentation of the climatic chamber with LED lighting: Together with the climatic chamber you will also receive: DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System. For more information, we invite you to view our article POL-EKO Accessories, where you can find photos and characteristics of all the accessories available for Pol-Eko models. Accessories for KK climatic chambers: - Optional separate controls for each light module - Grid shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Phytotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door - Container for deionized water

This Peak Scientific Nitrogen Gas Generator Model: NG250A was removed from a university lab where it (more) was surplus to requirements. The unit powers up and has passed a professionally performed health check with a couple of advisories. It did not require a service reset. The full report is available on request. It is in good cosmetic condition with marks from use. It comes with a user manual and disk.

Peak Scientific NM60L-ACS Nitrogen Generator This system was removed from a university lab where it  (more)was surplus to requirements. The nitrogen generator is in good cosmetic condition. It powered on, with the power light illuminating green. Specifications: - Serial No.: S3-06-54 - 60 litres per minute nitrogen generation - Three pressure gauges: Back-up, Air, and Output - External compressed air source required (no built-in compressor)

QIAGEN’s real-time PCR cycler, the Rotor-Gene Q, combines multiple optimized design features to prov (more)ide the outstanding performance and reliable results that your research demands. Together with optimized QIAGEN kits for real-time PCR, the Rotor-Gene Q enables streamlined analysis for a wide range of applications. Q-Rex Software is the new operating and analysis software for life science qPCR applications, with a plug-in concept that lets you add new functionality without affecting established workflows. A range of QIAGEN kits for the Rotor-Gene Q enables reliable quantification in all your real-time PCR applications without the need for optimization of reaction and cycling conditions. Kits for real-time PCR and HRM applications are available for: Gene expression analysis Pathogen detection DNA methylation analysis Genotyping and gene scanning miRNA research Channel: Blue Excitation: 365 ± 20 nm Detection: 460 ± 20 nm Examples of fluorophores detected: Marina Blue, Edans, Bothell Blue, Alexa Fluor 350, AMCA-X Channel: Green Excitation: 470 ± 10 nm Detection: 510 ± 5 nm Examples of fluorophores detected: FAM, SYBR Green I, Fluorescein, EvaGreen, Alexa Fluor 488 Channel: Yellow Excitation: 530 ± 5 nm Detection: 557 ± 5 nm Examples of fluorophores detected: JOE, VIC, HEX, TET, MAX, CAL Fluor Gold 540, Yakima Yellow Channel: Orange Excitation: 585 ± 5 nm Detection: 610 ± 5 nm Examples of fluorophores detected: ROX, CAL Fluor Red 610, Cy 3.5, Texas Red, Alexa Fluor 568 Channel: Red Excitation: 625 ± 5 nm Detection: 660 ± 10 nm Examples of fluorophores detected: Cy5, Quasar 670, LightCycler Red640, Alexa Fluor 633 Channel: Crimson Excitation: 680 ± 5 nm Detection: 712 high pass nm Examples of fluorophores detected: Quasar 705, LightCycler Red705, Alexa Fluor 680 Channel: HRM Excitation: 460 ± 20 nm Detection: 510 ± 5 nm Examples of fluorophores detected: SYBR Green I, SYTO9, LC Green, LC Green Plus+, EvaGreen Operating software is available. Analysis software must be purchased.

Nanometrics Nanospec/AFT Microarea Gauge 010-0180 Lab This system was removed from a university engi (more)neering department as surplus to requirements. This system powers on and is in a reasonably good cosmetic condition, unable to test it further at our facility. System includes: Nanometrics CTS-102 Film Thickness Computer/power supplyM/N: CTS 102-7200-0536-01S/N: 1282-2-00549 1x Nanometrics PrinterM/N: 6420-19107S/N: 53892536 1x Olympus BH Base 1x Olympus BHM Stage 2x American Optical 10xWF Eyepiece 1x Olympus 5 Piece Nose Piece with 3 Objective Lenses: - 1x Olympus M10 0.25P/N: 412650 1x Olympus MPlan 100 0.90P/N: 402546 1x Olympus MPlan 40 0.63P/N: 405434

The flow cytometer CyFlow Space multi-laser of high range combines flexibility and accuracy. When y (more)ou select up to 5 sources of light different, 16 parameters of the analysis, a grading module is optional and the patented method of Counting Absolute Cell Volume (TVAC) for the counting of real cells and particles without the use of calipers, you can find the device configuration optimum for each application. The forwarder of optional high speed and the ability to analyze up to 25,000 particles per second make the CyFlow Space flow cytometer is ideal for the high demands. It shows the price of the configuration CY-S-3001_VA1 (1 laser 488/50-5P). Refer to available configurations in the table side and contact to budget. Features System configuration modular CyFlow Space: individual selection of up to 5 light sources and up to 16 parameters of analysis Flexible conversion and upgrade capability of the system. Sensitivity to fluorescence: ≤ 100 MESF (FITC) | ≤ 50 MESF (PE) Recognition of micro-particles ≥ 100 nm Count volumetric cells absolute (TVAC) CCD camera integrated to control the sample flow. Optional: charging Station automatic high-speed for microtiter plates 96-and 384-well Optional: module sorter CyFlow for classification of particles and cells is not destructive, closed Light sources Selection of up to 5 light sources different: - Blue laser: 50mW @ 488, 200mW @ 488 - Red laser: 25mW @ 638nm, 40mW @ 640nm - Violet laser: 100mW @ 405nm - UV laser: 60mW @ 375nm - Green laser: 30mW @ 532nm, 100mW @ 532nm - Laser-yellow: 100mW @ 561 nm - Laser orange: 50mW @ 594 - UV-LED 'high power': 365 nm Optical Optical system modular with photomultiplier tubes (PMT) for FSC, SSC, FL1-FL13 Optical filters replaceable Flow system Bucket of quartz for transport, laminar and approach to hydrodynamic processes. Count absolute volumetric true' (TVAC) - for the cell count and absolute Software PC with Windows ™, the current standard of the industry Operating system Microsoft WindowsTM 7 Professional 32-bit LCD screen color TFT 22 " Software FloMax for acquisition and evaluation of data in real-time. Data format: Standard flow cytometry (FCS) 2.0 and 3.0

Mass comparators of UMA 1000 series stand for the highest standard of professional automatic mass co (more)mparators. They provide comparison of 100 g – 1000 g weights of E1 and 10 g - 1000 g weights of E2 and lower classes. The device is equipped with 18 magazine positions allowing to deposit up to 18 weights. This solution allows to perform either comparison for complete set of weights carried out within one process or comparison for just a few weights of the same mass. Owing to elimination of human factor and with temperature changes and air drafts reduced to zero, UMA automatic mass comparators provide the highest possible measurement repeatability.