LAUDA PRO P 30 heating thermostat

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PVL 15 C model - Tank volume min. 11 L - Tank volume max. 15 L - Tank opening 230 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 100°C - Operating temperature range from -60°C to 100°C - Pump connectors M16 x 1 - Fitting 13 Ø

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Use Thermo Scientific Pretreatment Cartridges and Filters when the quality of your feed water doesn’ (more)t match the requirements for your water purification system. Double cartridge pretreatment system (includes 5µm filter with carbon cartridge and a hardness stabilizer cartridge)

Luminex 200 Multiplex Assy System with Luminex SD & XYP This was removed from a university lab w (more)here it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with marks from use. Included are; Luminex 200Model: 200Serial#: LX10007082403 Luminex XYPModel: XYPSerial#: LXY07085103

This Miltenyi Biotec autoMACS Pro Cell Separator was removed from a university lab where it was surp (more)lus to requirements. The item turns on and is in good condition with only minor signs of use. When the device started up, it ran into an error with code 7033. The error message warned that the clock timer was not set, and we needed to select the "set_time" option from the user settings. We tried to dismiss the warning by pressing the OK button, but the touchscreen did not respond. Unfortunately, this meant we were unable to perform any further testing. Due to this item is sold as Spares/Repairs.

VACUUBRAND MV 10C NT Chemistry Diaphragm Pump Ultimate Vacuum 0.9 mbar / 0.68 torr Maximum Pumping  (more)Speed 5.6 CFM at 60Hz Number of Heads/Stages 8/4 Features - Outstanding chemical resistance and superior vapor tolerance - Reduced process time due to very high flow rates even close to ultimate vacuum - Very low vibration and quiet - Excellent ultimate vacuum even with gas ballast - Excellent environmental friendliness due to efficient solvent recovery (on models with EK accessory) Four-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet the highest requirements. The four-stage design of the eight-cylinder pump MV 10C NT provides the advantageous combination of high pumping speed and very low ultimate vacuum of 0.9 mbar in a very compact design. All internal parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. Upgraded with an exhaust waste vapor condenser (EK) the MV 10C NT +EK provides an excellent, environmentally friendly system with efficient solvent recovery. A separator for the inlet (AK) made of glass (with protective coating) against particles and liquid droplets is available as an optional accessory. The high pumping speed and excellent ultimate vacuum of the MV 10C NT reduces the process time significantly. The pump meets the high vacuum requirements, e.g., of parallel processes in vacuum networks. Further typical applications are vacuum ovens, large rotary evaporators, pilot plants and mini plants as well as kilo laboratories. For rough operating conditions we recommend an inlet separator (AK) to protect the pump from particles and liquid droplets. The exhaust waste vapor condenser on the MV 10C NT +EK (also available as accessory) enables near-100-percent solvent recovery, efficient recycling, and active protection of the environment. INCLUDED: The VACUUBRAND MV 10C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 27 x 5ml & 15ml Adapters, Cat. #: 5920716000 The Eppendorf 27 x 5ml & 15ml Adapter (more)s, Cat. #: 5920716000 are for use with the Eppendorf S-4x1000 Rotors. These adapters feature a capacity for 27 x 5 & 15ml conical tubes each with the maximum tube dimensions (Diameter x Height) of 17mm x 121mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 7 x 50ml Adapters, Cat. #: 5825733002 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 27 x 5ml & 15ml Adapters, Cat. #: 5920716000Bottom ShapeConicalRotor CompatibilityS-4x1000 Swing Bucket Rotor