Eppendorf 7 x 50ml Adapters, Cat. #: 5825733002

Case for OHAUS Navigator scales

Scilogex Block, used for 50mL tubes, 4 holes50mL x 4 block, 28.7mm dia. x 75mm depth. Used inconjunc (more)tion with the Scilogex's Digital Thermal Dry-Baths. INCLUDED: The Scilogex Block, used for 50mL tubes, 4 holes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco Liquid Nitrogen TrapForprocessing samples with ultra low eutectic points. Secondary Trap co (more)nnects inseries with a freeze dry system and vacuum pump to prevent contaminants frommigrating into the vacuum pump. After pulling a vacuum, liquid nitrogen may beintroduced via the liquid nitrogen port. Liquid nitrogen cools to -196C(-321F) to trap contaminants with low eutectic points. The well may bedefrosted and the liquid drained from the drain hose. Glacier whiteepoxy-coated steel construction. Two valves may be opened (trap) or closed(by-pass). Opened valves allow gaseous contaminants to be trapped in the liquidnitrogen well. Closed valves allow gaseous contaminants to by-pass the wellduring defrosting and draining. 3/4" OD inlet and outlet connections.Includes an insulated filler tube for connection to a user-supplied liquidnitrogen tank; 20" rubber tubing; 3/4" ID x 3/8" wall; and twoclamps. Liquid nitrogen is required (not included). INCLUDED: The Labconco 7394800 Liquid Nitrogen Trap includes: - Insulated Filler Tube - Clamps x 2 - 20" Rubber Tubing (3/4" ID x 3/8" Wall) - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap -105 C Cold Trap Brushed, stainless steel and glacier white, epoxy-coated ste (more)el exterior with blue accents; Temperature graph illuminates green when collector coil reaches operating temperature of -65C HCFC-free refrigeration system with two 1/3 hp compressors lowers cold trap to -105C (-157°F) in less than 40 min. 4L stainless steel collector Arylic lid with two Quick-Disconnect fittings for connection to a CentriVap Concentrator Stainless steel drain port with corrosion-resistant, nylon valve Grounding clip and ON/OFF power switch INCLUDED: The Labconco 7385020 CentriVap -105 C Cold Trap, 115V, 60Hz includes: - Tubing - Clamps x 2 - Wire Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA RCT basic Synthesis Solution 1000 Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310  (more)°C Setting accuracy speed 10 rpm Features - Reduces hazard potential compared to oil baths, ensuring safe synthesis in 500 ml round-bottom flasks. - Made of solid anodized aluminum, withstands temperatures up to 300 °C. - Versatile Usage: Optional stand rod allows secure attachment of reflux condenser. - LED display for set and actual values, with temperature setting range from 0 to 310 °C. - ±5 K heat control accuracy at 100°C, ensuring precise temperature regulation. The RCT basic Synthesis Solution 100, designed for safe synthesis in 1000 ml round-bottom flasks. This system significantly reduces hazard potential and simplifies handling and cleaning. The solid anodized aluminum synthesis attachment withstands temperatures up to 300°C. Optional stand rod securely attaches a reflux condenser. The perfect solution for cost-effective synthesis.INCLUDED: The RCT basic Synthesis Solution 1000 includes: - H 16 V Support rod - R 350 Universal clamp - H 44 Boss head clamp (2 pcs.) - IKAFLON 25 ellipse (5 pcs.) - RCT basic - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - Screw driver - H 135.40 Flask carrier 1000 ml without handle - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco CentriVap High Capacity Micro Rotor, PTFE coated Available in standard, or with fluorop (more)olymer resin coating that ensures resistance to acids High capacity micro rotor holds up to 148 micro centrifuge tubes, 1.5mL or 2.0mL, and micro auto sample vials approx. 12mm in dia. x 35mm High capacity micro rotors don't require lip on the tube and are perfect for vials INCLUDED: The Labconco 7553501 CentriVap High Capacity Micro Rotor, PTFE coated includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Overhead Stirrer Flexible Shaft The Heidolph Overhead Stirrer Flexible Shaft is an accessor (more)y for Heidolph Overhead Stirrers used in laboratory settings. The shaft is made of PTFE and stainless steel, providing excellent chemical resistance and durability. It is used as an extended stirrer shaft for the impeller, allowing for greater flexibility and reach when stirring samples. This flexible shaft is compatible with Heidolph Overhead Stirrers, ensuring accurate and efficient stirring performance. It is easy to install and use, making it a practical solution for a variety of stirring applications in research and analytical laboratories. The Heidolph Overhead Stirrer Flexible Shaft is a valuable addition to any lab that requires precise and reliable stirring of samples with the flexibility to reach difficult-to-access areas. INCLUDED: The Heidolph Overhead Stirrer Flexible Shaft includes: - Chuck - 3 Year Manufacturer's Warranty

Dimensions (HxWxD): 760 x 1525 x 790 mm