Emitech SC7620 Mini Sputter Coater / Glow Discharge System

For fluid group: 1 Capacity: 50Ltr Weight: 14.6kg Max. Operating pressure: 4bar Operating temperatur (more)e: -20 to 80°C Central opening diameter: 97mm Side openings diamter: 23mm

Seal apparatus

Labconco CentriVap DNA RotorForuse with Labconco CentriVap Systems INCLUDED: The Labconco 7462900  (more)CentriVap DNA Rotor includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Accuris AP1096 IsoPure 96 Automated Purification System Sample Capacity 96 Samples / 50ul to 1000ul  (more)Display 7.0 Inch Color Touch Screen Program Memory 100 Programs (Internal Memory) Features - Compatible with all popular magnetic bead kits - Touch screen panel for on-board programming and operation - Process up to 96 samples in deep-well plates - 8-position carousel with 2 heating blocks - Sample volumes from 50µl to 1000µl - Lysis and elution temperature range of Ambient +5°C to 120°C - Variable mixing speeds with 10 levels to select from - Ultraviolet sterilization lamp (UVC) inside the processing chamber provides effective elimination of most bacterial, viral and stray genomic DNA contaminants The Accuris AP1096 IsoPure 96 Automated Purification System is a high throughput, automated system that improves the efficiency and reproducibility of magnetic bead-based purification protocols. Capable of processing up to 96 samples at one time, the instrument is easy to set up and program. Mixing, magnetic bead transfer, washing, and elution steps are performed automatically. The purification process can be completed within 10 to 60 minutes depending on the type of reagent kit used and complexity of the program. The IsoPure™ 96 can be programmed by using the color touch screen or the included mouse. After a protocol has been created, the instrument will calculate and display the estimated time for each step and the total time. Typical step settings include: - Tip Comb Loading and Unloading: Automate tip comb loading and unloading by designating the respective plate positions in the script. - Mixing: Parameters for mixing time, speed, and amplitude can be programmed for each step of the protocol. - Temperature Control: Heating of the sample mixture during the lysis and elution steps significantly improves the purity and yield of the target molecule. The IsoPure 96 is equipped with 2 heating blocks on the plate carousel that can be precisely set to temperatures from ambient + 5°C to 120°C. IsoPure deep well plates fit into the heating blocks for efficient heat transfer. A cooling fan inside the processing chamber maintains the ambient operating temperature to ensure consistent results. - Bead Collection and Release: The complete collection of magnetic beads from sample mixtures is crucial for maximizing the yield of purified analytes. The IsoPure software offers full control of magnetic parameters to ensure cleaner extractions. General settings allow control of magnet speed, position, repeat collection cycles, etc, to guarantee consistent yields. Accuris Instruments has partnered with leading magnetic bead kit manufacturers to develop and optimize protocols for specific applications. To request scripts for specific kits, or for assistance in optimization, please contact us. An ultraviolet sterilization lamp (UVC) inside the processing chamber provides effective elimination of most bacterial, viral and stray genomic DNA contaminants. This additional safeguard reduces the possibility of unwanted DNA/RNA contamination of critical samples that could be amplified downstream in a PCR detection assay. UV sterilization time can be adjusted based on specific program requirements to ensure a sterile environment prior to purification. The IsoPure 96 can store up to 100 program files which can be transferred between instruments, or to a computer for storage or sharing. Simply insert the included flash drive to export the selected files. Programming control can be done via the touch screen, or by using the included mouse. A PC can also be connected for remote programming. Accuris offers high-quality deep well plates and magnetic tip combs designed to fit the IsoPure 96. Produced using virgin polypropylene and packaged in a sterile facility, these consumables are guaranteed to be contaminant-free. The IsoPure 96 also accepts industry-standard 96 deep well plates and tip combs designed for high throughput purification systems. INCLUDED: The Accuris AP1096 IsoPure 96 Automated Purification System includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Manufacturer: Applied Biosystems Model: 9800 Fast Thermal Cycler PCR System P/N: 4349441 S/N: 298000 (more)818; 298010874 YoM: 12.2005 Description: The 9800 Fast PCR System is the first integrated system optimized for trouble-free fast PCR performance. Applied Biosystems is the most trusted name in PCR. This PCR System is the first fully-integrated fast PCR solution designed to significantly shorten your time-toresult. The 9800 Fast PCR System reduces PCR reaction time from 2 hours to 25 minutes or less, getting you on to the next step of your research more quickly than ever before. The system is optimal for service labs looking for faster turnaround times, or for researchers sharing a single system where time-savings can be especially beneficial. The 9800 Fast PCR System is ideal for speeding up the PCR process. Based on the proven engineering of the GeneAmp PCR System 9700, the 9800 Fast Thermal Cycler is designed to considerably reduce PCR reaction time. Often, 500 bp fragments can be amplified from a genomic DNA background in 25 minutes. With faster amplifications, you still achieve the same level of performance and reproducibility that make Applied Biosystems instruments the standard for reliable thermal cycling. In addition, the system includes a Standard Mode for traditional protocols. The 96-Well Fast Thermal Cycling Plate is an integral component of the 9800 Fast PCR System. The plate has been optimized for 20 µL fast PCR reactions and is designed to fit with the 9800 system sample block. Features: Unmatched speed and performance:- PCR reaction times from 2 hours to 25 minutes or less- Superior reproducibility with uniform heating and cooling- Specificity and sensitivity with hot start chemistryOptimized for convenience:- Integrated 96-well system designed for fast results- Convenient master mix delivers consistent performance- Superior quality 96-well plates optimized for fast PCRResults you can count on:- Extending the family of proven PCR solutions- Authorized Thermal Cycler for PCR- Fast and Standard Modes to address your current and future PCR needs Specifications: Applied Biosystems 9800 Fast Thermal Cycler:- Format: 96-well- Thermal Non-Uniformity:(95ºC, 10 seconds after clock start): < 0.5ºC(55ºC, 10 seconds after clock start): < 0.5ºC- Block Temperature Accuracy: ± 0.25ºC, over the temperature range 35–100ºC- Temperature Range: 4.0–99.9°C- Ramp Speeds: Heating: 5.0°C/secondsCooling: 4.1°C/seconds- Choice of Ramp Modes: Fast and Standard Mode- Sample Temperature Control- Cycle Speed: < 10 minutes to uniformity cycle samples from 94°C, 0 seconds to 64°C, 0 seconds, 25 times- Power: 240 VAC 50-60 Hz 850 VA- Dimensions (H x W x D): 26 x 30 x 52 cm - Weight: 12 kg 96-Well Fast Thermal Cycling Plate:- Format: 96-well SBS standard- PCR Volume Range: 20 µL (recommended) Min./Max. 10-30 µL- Total Well Liquid Capacity: 100 µL (max.) Items delivered: - Applied Biosystems 9800 Fast Thermal Cycler PCR System- Instruction Manual as PDF via E-Mail request Condition: This PCR system is in very good cosmetic as well as operating condition. It is 100% functional tested and ready to be used.

This Sorvall SLC-4000 Fixed Angle Centrifuge Rotor PTI F9S-4x1000 was removed from a university lab  (more)where it was surplus to requirements. The unit is in good cosmetic condition with only minor marks from use, though it has not been tested and will need to be inspected by a qualified engineer before it is used again. Specs;7,000rpm9,220 x gHolds: 4 X 100ml

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 1 kg), plastic box Number of pi (more)eces in the set: 13 weights 1 g i 2 g &ndash; solid masses without adjusting chamber

Precision in PRO version The CY10 series precision balance is designed for fast, accurate and repeat (more)able weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 series precision balance: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance&rsquo;s memory &ndash; either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Precision balance and labelling scale in one device If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series precision balance can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

IKA M20 Universal Mill Useable Volume Max. 250 ml Speed Max. 20000 rpm Feed Grain Size Max. 7 mm  (more)Features - Double-walled grinding chamber with water cooling for precise temperature control. - Removable grinding chamber for easy cleaning. - Dual operation capability with two grinding chambers using one drive unit. - Includes M 21 blade for efficient grinding of hard and brittle substances. - Robust stainless steel construction for durability and reliability. The IKA M20 Universal Mill is a robust batch mill designed for dry grinding of hard and brittle substances up to 250 ml at a fixed speed of 20,000 rpm. Featuring a double-walled grinding chamber with water cooling capabilities through two hose adapters, it ensures precise temperature management during operations. The removable grinding chamber simplifies cleaning and maintenance, while its dual-chamber operation with a single drive unit enhances versatility. This mill includes the M 21 blade, crafted from stainless steel, to effectively handle challenging milling tasks in laboratory settings.INCLUDED: The IKA M20 Universal Mill includes: - M20 Mill - M 21 Blade - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA M20 Universal Mill SpecificationsProcess typebatchOperating principlecutting/impactMotor rating input450 WMotor rating output225 WSpeed max.20000 rpmCircumferential speed max.72 m/sUseable volume max.250 mlFeed hardness max.5 MohsFeed grain size max.7 mmMaterial beater/cutterstainless steel 1.4034Material milling chamberstainless steel 1.4301Power-ON time7 min Power-OFF time10 min Milling chamber, can be cooled with wateryesMill feed can be cooled in milling chamber with dry iceyesDimensions (W x H x D)170 x 350 x 170 mmWeight6.6 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage230 / 115 / 100 VFrequency50/60 HzPower input550 W Request a Formal Quote

IKA C-Mag MS 7 Magnetic Stirrer Speed Range 100 to 1,500 RPM Stirring Quantity Max. 10 l Set-up Pl (more)ate Material Ceramic Features - Powerful motor for stirring quantities of up to 10 l (H2O) - Elevated control panel for protection against leaking liquids - Speed range: 100 - 1500 rpm - Simple controls ensure ease of use an integration within lab space - Small footprint for efficient usage of benchtop space The IKA C-Mag MS 7 Magnetic Stirrer is designed for stirring tasks without heating, featuring a ceramic set-up plate that provides excellent chemical resistance. It is equipped with a powerful motor capable of stirring quantities up to 10 liters (H2O) at speeds ranging from 100 to 1500 rpm. The elevated control panel protects against leaking liquids, ensuring safe and reliable operation. The stirrer has one stirring position, with a motor rating output of 1.5 W and a left direction of rotation. The device offers speed control via a scale from 0 to 6, and can accommodate stirring bars up to 80 mm in length. The compact design measures 220 x 105 x 335 mm and weighs 5 kg, making it ideal for various laboratory environments. It operates within a permissible ambient temperature range of 5 to 40 °C and a relative humidity of up to 80%.