Duplex Light Guide 14/16mm 2x 115cm Cold Light Source Microscope Mikroskop

The BioXp 3200 system advanced gene assembly techniquesenable scientists to rapidly develop syntheti (more)c genomes and genome parts for research and development activities. The BioXp 3200 System is designed to rapidly synthesize high-quality, linear DNA fragments from custom designed oligonucleotide pools and reagents across a meaningful section of the complexity continuum. A capacity of 32 DNA fragments (Tiles), ranging in size from 350 bp to 1.8 kb, can be assembled with high fidelity. DNA fragments synthesized by the BioXp 3200 System are ready for off-line sequencing QC, further assembly into larger fragments, cloning into vectors with compatible ends and other common downstream applications. BioXp Tiles size range: 350 – 1800 bp BioXp Degenerate Library Tiles size range: 300 – 800 bp (recommended) BioXp Clones size range: 350 – 1800 bp BioXp Tiles GC% complexity: 20 – 70% GC (350 bp – 1.0 kb), 40 – 60% GC (350 bp – 1.8 kb) BioXp Degenerate Library Tiles GC% complexity: 20 – 70% (within recommended size range) BioXp Clones GC% complexity: 20 – 70% GC (350 bp – 1.0 kb), 40 – 60% GC (350 bp – 1.8 kb) BioXp Tiles composition: A, T, C or G residue BioXp Degenerate Library Tiles composition: IUPAC code residues BioXp Clones composition: A, T, C or G residue BioXp Tiles yield: >200 ng of purified, linear dsDNA in 45 µL TE Buffer BioXp Degenerate Library Tiles yield: >200 ng of purified, linear dsDNA library in 45 µL TE Buffer BioXp Clones yield: ~ 20 µL of cloned product  (± 2 µL) and ~ 40 µL of uncloned Tiles (± 2 µL) BioXp Tiles format: 1 to 32 reactions in a 96-well plate format BioXp Degenerate Library Tiles format: 1 to 32 reactions in a 96-well plate format BioXp Clones format: 1 to 32 reactions in a 96-well plate format Dimensions (WxHxD): 660 x 530 x 740 mm Weight: 63.4 kg

Square Wave Pulse Ranges Voltage Range: LV Mode 5 to 500/1 V res, HV Mode 505 to 3000/5 V res Voltag (more)e Accuracy: LV Mode 5%, HV Mode 5% Pulse Length Range: LV Mode 10 µs to 999 µs/ 1 µs res, 1 ms to 999 ms/1 ms res, HV Mode 10 µs to 600 µs/1 µs Multiple Pulsing: LV Mode 1 to 120 (10 per sample), HV Mode 1 to 36 (3 per sample), Pulse Interval 0.1 s to 10 sec Capacitance in µF: LV Mode 3775 µF, HV Mode 85 µF, Voltage Droop 20% Load < 1 K Ω, 10% Load > 1 K Ω Exponential Decay Pulse Ranges Voltage Range: LV Mode 5 to 500/1 V res, HV Mode 505 to 3000/5 V res Voltage Accuracy: LV Mode 5%, HV Mode 5% Time Constant Range: LV Mode 1 ms to 5.158 S, HV Mode 0.5 ms to 133.875 ms Multiple Pulsing: Multiple Pulsing 1 to 12 (Rint <100 ohm), 1 to 24 (Rint >100 ohm), Pulse Interval 5 to 30 sec Capacitance in µF: LV Mode 25 to 3275 µF/25 µF res, HV Mode 10, 25, 35, 50, 60, 75, 85 µF Internal Resistance (in parallel with load): LV 25 to 1575 Ω / 25 Ω res, HV 50 to1575 Ω / 25 Ω res Sample Resistance (Load) Exponential Decay or Square: LV Mode PL ≤ 100ms, load ≥ 8-9 Ω, PL >100ms, load ≥100 Ω, HV Mode Load ≥ 40 Ω Charging Time: LV < 7 sec, HV < 4 sec Monitoring: Pulse Voltage, Width, Droop % and Sample Resistance Programmability: Storage over 1000 Protocols Arc Control: Yes Interlock Switches: Yes Pre-Pulse Sample Resistance Check: Yes Pulse Over Current Protection: Yes PC Control: Yes PC Communications: Yes Log Report: Yes Remote Operation: Yes Foot Switch Control: Yes Dimensions (HxWxD): 324 x 286 x 216 mm Weight: 7.3 kg

Ohaus heavy-duty orbital shakers These models are designed to handle a wide range of applications, e (more)nsuring constant orbital shaking. Digital models offer accurate speed control for applications that require repeatable results. - Includes a tray and a rubber mat; over 70 accessories as an option - Maintenance free motor - Protect your champions. The increase function allows a gradual increase of the speed up to the set point, to avoid splashing. If so, a sensor detects the unbalance of the load and slows down the speed reaching a safer one Applications Cell cultures, solubility studies, extractions, suspensions and bacterial and yeast cultures, dyes / bleaches, immunoassays, protein studies, absorption techniques Display Easy-to-read independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models) and knobs with markings for basic controls (analog models). Operation Detachable three-wire cable and plug (included) Communication RS232 interface provides one-to-one communication for data collection and unit control (digital models) Structure Cold Rolled Steel (CRS) Construction features Integrated tray (457 x 610 mm) with non-slip rubber mat included. Technical characteristics of the SHHD2325AL model Transmission system: Brushless DC Motor; Triple Eccentric Calibration: Speed ​​calibration Orbit {metric}: 25 mm Power consumption: 75 W Safety certification: CE; TUV Speed ​​accuracy: ± 1rpm, greater than 100rpm ± 1% of set speed

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

The professional weighing workstation is intended for microbalances and analytical balances. It is e (more)quipped with two lockers for a computer and an emergency UPS power supply or a power strip. The workstation also has a sliding shelf for a keyboard and a mouse. It additionally features ventilation openings and a base for a monitor. The separated anti-vibration part provides protection against vibration, and the feet feature rubber tips to facilitate table levelling on uneven floors. The structure of the workstation is made of steel, the top of stone, and the working part of MDF.

KNF UN842.3FT.40P IP44-T Diaphragm Pump Ultimate Vacuum 4 mbar (abs.) Maximum Flow Rate 34L/min (2. (more)04 m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free The KNF UN842.3FT.40P IP44-T Diaphragm Pump features an integrated KNF self-drying system. Designed for a wide range of applications in laboratories, including vacuum drying of chambers (for drying or heat-treating substances and components) or steam sterilizers for sterilizing instruments, vessels, filters and textiles. The KNF UN842.3FT.40P IP44-T Diaphragm Pump can be used very universally due to its high resistance to aggressive media. The KNF self-drying system allows condensed liquid to be blown out of the pump heads at a high speed during evacuation. The drying cycle can be adjusted to the requirements of the individual process using three variables. The KNF UN842.3FT.40P IP44-T Diaphragm Pump is chemical-resistant, therefore suitable for highly aggressive or corrosive gasses and vapors. This pump is 115V. The KNF UN842.3FT.40P IP44-T Diaphragm Pump is brand new in box .INCLUDED: The KNF UN842.3FT.40P IP44-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Complete rotation evaporation system consisting of: IKA RV 10 Auto rotary evaporator IKA HB Digital  (more)waterbath IKA RC 2 Control recirculating chiller IKA Vacstar Digital vacuum pump IKA RV 10 Auto: The completely revised RV 10 auto is the flagship of the IKA Rotation Evaporator product line. Its impressive features include an innovative control concept with a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards. The RV 10 auto offer all properties required for efficient, safe, and cost-effective operations. These include automatic control of the vacuum and cooling water volume. Its intuitive handling concept quickly leads its users to their desired results in every application. Thanks to specially designed glass guides, the condenser makes extremely efficient use of the 1500 cm² cooling surface. Thanks to its extended ramp programming capability, the RV 10 auto allows users to carry out customized procedures. Other innovative features, such as smooth start, interval mode, right-left operation in interval mode, or the timer function for time-lapse tests, make everyday work in the laboratory much easier. Safety is ensured by the motorized lift with safety-stop function that automatically lifts the evaporation flask out of the heating bath in the case of power failure. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. Type of cooling: Vertical condenser Cooling surface: 1500 cm2 Speed range: 5 – 300 rpm Reversible direction of rotation: yes Speed tolerance set rotation speed < 100rpm: ±1 rpm Speed tolerance set rotation speed > 100rpm: ±1 % Lift: Motor Stroke: 140 mm Vacuum controller integrated: yes Timer: yes Dimensions (WxHxD): 500 x 430 x 440 mm Weight: 34.96 kg IKA HB Digital: Compact and ergonomic heating safety bath for all tempering media. Heating temperature range: Ambient – 180°C Heat control: Turning knob Set temperature resolution: ±1 K Filling volume max.: 4 l Filling point min.: 60 mm Material in contact with medium: stainless steel 1.4404 Fixed safety circuit: 190°C Adjustable safety circuit: 50 – 190°C Outer diameter: 257 mm Inner diameter: 225 mm Outer height: 190 mm Inner height: 130 mm Dimensions (WxHxD): 330 x 190 x 325 mm Weight: 3.9 kg IKA RC 2 Control: High efficient and temperature-stable circulating chiller with unique wireless controller. Designed for cooling applications up to -30 °C with powerful 400 W cooling capacity. The speed-controlled PEEK pump allows an indirect continuous adjustment of the maximum pressure and flow rate. Due to its outstanding temperature stability of about ± 0.05 K (at -10 °C), the RC can handle even the most demanding applications. Via the connection socket for an external PT 100 temperature sensor, it is possible to measure and control temperature directly in the working medium. An external PT 100 temperature sensor is included in scope of delivery. With the wireless controller (WiCo), it is possible to operate the RC 2 safely and comfortably independent of the device position. The included feed hopper and bleed valve enable the safe and clean handling of the thermofluid. An easy to open front hood allows for convenient cleaning of the air filter. The high quality insulated 4-liter bath reservoir allows the use of up to 2.5 liters of thermofluid in the external cooling circle without refilling. Cooling agent pressure max.: 20 bar Cooling capacity (20°C): 400 W Cooling capacity (10°C): 370 W Cooling capacity (0°C): 320 W Cooling capacity (-10°C): 240 W Cooling capacity (-20°C): 130 W Operating temperature min.: -30 °C Operating temperature max. (with external heating): 80 °C Temperature display: yes Temperature control: PT 100 Connection for ext. temperature sensor: PT 100 Display resolution: 0.01 K Display for operation with ext. sensor: yes Warning function optical: yes Warning function acoustic: yes Warning function excess temperature: yes Warning function insufficient temperature: yes Sub-level protection: yes Filling volume: 1.4 – 4.0 l Pump type: Pressure- / suction pump Pump capacity adjustable: yes Pump pressure max. (0 liters discharge flow): 0.3 bar Pressure pump (suction side) (0 liter flow): 0.2 bar Flow rate max. (0 bar back pressure): 18 l/min Calibration option: yes Dimensions (WxHxD): 220 x 475 x 525 mm Weight: 28.5 kg IKA Vacstar Digital: The four-chamber membrane vacuum pump convinces with its high suction capacity, low space requirement and high serviceability. The setting of the parameters is carried out through a rotary-push button over a digital display showing current rpm. The Vacstar digital is used for dry and oil-free applications in the laboratory. The membranes of the pump are particularly chemical resistant. Pump rate max.: 1.32 m³/h Pump rate max.: 22 l/min Final pressure without gas ballast: 2 mbar Suction levels: 4 Cylinder: 4 Two-point control: yes Analog speed vacuum control: yes Speed control: Turning knob Speed range: 285 – 1200 rpm Material in contact with medium: Al2O3, PTFE, FFPM, PPS, NBR Dimensions (WxHxD): 150 x 375 x 370 mm Weight: 11.5 kg