Drefa Sink Cabinet

COMBISTORAGE 4 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Completely made of electroga (more)lvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Made in two or three compartments with smooth painted or glass doors - Cabinet body in galvanized steel Characteristics of the ACID COMPARTMENT: - Completely made of electrogalvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Features of the BASE COMPARTMENT: - Two retention shelves made of stainless steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Characteristics of the COMPARTMENT FOR "TOXIC SUBSTANCES": - Two retention shelves made of painted steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Supplied: - Acids: 2 shelves in plasticized steel - Bases: 2 shelves in stainless steel - Toxic substances: 2 shelves in painted steel - Flammable: 3 shelves and 1 retention tank with painted steel grid (max load of 60 Kg evenly distributed) Optional: - Shelves - Trays - Timer - Visual and acoustic alarm system - Ventilation - Molecular aspirator - Activated carbon filter

Eppendorf 23x2.6-8ml Adapters for S-4-104, Cat # 5825738004 New in box Eppendorf 23 x 2.6-8ml adapte (more)rs (Cat. # 5825738004) 23 x 2.6 to 8mL tube capacity for the Eppendorf S-4-104 rotor in Eppendorf 5810/5810R centrifuges. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 23x2.6-8ml Adapters for S-4-104, Cat # 5825738004 includes: - Full 6 Month Parts and Labor Warranty

VACUUBRAND MD 1C +AK+EK Chemistry Vacuum System Ultimate Vacuum 2 mbar Max. pumping speed at 60 Hz (more) 0.88 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and very low vibration - Excellent environmental friendliness due to efficient solvent recovery This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors. This system is usable for increased vacuum requirements with high boiling solvents and often replaces rotary vane pumps. Typical applications are rotary evaporators and vacuum drying ovens. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment.INCLUDED: The VACUUBRAND MD 1C +AK+EK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 4 x 1.5/2.0ml Adapters, Cat. # 022639277 The Eppendorf 4 x 1.5/2.0ml Adapters, Cat. # 0226 (more)39277 are for use with the Eppendorf A-4-38 Swing Bucket Rotor for the Eppendorf 5702/R Centrifuges. These adapters feature a capacity for 4 x 1.5/2.0ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 11mm x 43mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 4 x 1.5/2.0ml Adapters, Cat. # 022639277 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 4 x 1.5/2.0ml Adapters, Cat. # 022639277 SpecificationsBottom ShapeRoundRotor CompatibilityEppendorf A-4-38 Swing Bucket Rotor

The SciLog SciCon combines temperature sensing capabilities with conductivity sensing capabilities i (more)n a compact, disposable, single-use package. Sensitivity Range 1 µS/cm to 200 mS/cm 0.1 µS/cm resolution Operating Mode/Auto Range Display Conductivity: 1 µS/cm to 200 mS/cm Temperature: 0°C to 50°C Compatible with 5 types of single use sensors (not included) Connector type Luer Compatible Tubing Sizes: ID 0.03¨ to 0.31¨ Max. Flow Rate: 1 L/min Max. Pressure: 60 psi Part Code (Packs of 5): 080-599PSX-5 Connector type 3/8¨ Barb Compatible Tubing Sizes: ID 0.31¨ to 0.38¨ Max. Flow Rate: 8 L/min Max. Pressure: 60 psi Part Code (Packs of 5): 080-594PSX-5 Connector type 1/2¨ Barb Compatible Tubing Sizes: ID 0.50¨ Max. Flow Rate: 17 L/min Max. Pressure: 60 psi Part Code (Packs of 5): 080-595PSX-5 Connector type 3/4¨ Tri-Clover (TC) Compatible Tubing Sizes: Tubing with 3/4¨ TC Max. Flow Rate: 31 L/min Max. Pressure: 60 psi Part Code (Packs of 5): 080-596PSX-5 Connector type 1¨ Tri-Clover ‘Ladish Compatible Tubing Sizes: Tubing with 1¨ TC Ladish Max. Flow Rate: 60 L/min Max. Pressure: 60 psi Part Code (Packs of 5): 080-597PSX-5

Universal H-Stand for ES-LS-DLS-PW-DLH-OHS Velp

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Eppendorf 25 x 7ml Adapters, Cat. # 022638700 New in box Eppendorf 25 x 7ml adapters (Cat. # 0226387 (more)00) for rectangular 400ml buckets for the Eppendorf 5810 and 5810R centrifuges. This is a two piece set, and the adapters are new in packaging. The Eppendorf 25 x 2.6-5ml Adapters, Cat. # 022638700 arediscounted, brand-new, and includes a 6 Month Full Parts and Labor Warranty.

Including testing report (see example).

For parts only, cannot be repaired! The Sciclone ALH 3000 workstation is the foundation of Caliper L (more)ife Sciences’ family of automated liquid handling systems, and the number one choice of automation experts. With proven performance, open-deck design, and integration-friendly architecture, the ALH 3000 workstation can be configured to handle just about any automated liquid handling application. Open, modulare design Three “Swap-on-the-fly” pipetting heads 96-well plate densitie Volumes from 100 nL to 200 µL Independent 8-channel pipetting capability Compatibility with a wide variety of options, including Sciclone Gripper, bulk reagent modules, an on-deck microplate shaker, temperature-controlled locators, a positive-pressure filtration system, and more Hundreds of different configurations Applications Worldwide popularity and the availability of a comprehensive range of options have made the ALH 3000 workstation a favorite platform for the development of automated liquid handling applications such as: High-throughput plasmid preparation BAC DNA preparation Sequencing template amplification SNP genotyping High-throughput PCR cleanup The Sciclone ALH 3000 Advanced Liquid Handling system delivers highly accurate and precise liquid handling in a versatile, scalable open-design format. With the flexibility to adapt as your needs change, it is an ideal tool for automating virtually any genomic, proteomic or drug screening protocol. Worktable Data: 20 microplate positions, 8 deck holes for recessed accessories (columns 4 and 5) Robotic Positioning: Bi-directional repeatability, X-axis ±20 micron, Y-axis ±20 micron, Z-axis ±20 micron Pneumatic Requirements: Oil-free, dry air at 60 -70 psi recommended Dimensions (HxWxD): 940 x 1220 x 710 mm Weight: 157 kg