CleanAir downflow cabinet

Scientific Industries Bead Genie™, 120V The Scientific Industries Bead Genie™, 120V is a bead beater (more) ideal for lysing, extraction, or homogenization applications, utilizing an aggressive vertical mixing motion. This unit is supplied with holders to hold vertically 12 x microtubes (1.5 or 2.0ml), 6 x 15ml tubes, or 3 x 50ml tubes, and 12 x microtubes (1.5 or 2.0ml) horizontally. Beads are also available and sold separately for complete bead beating solution. The Bead Genie, built in the USA, is compact compared to most bead beaters and homogenizers, yet heavy and durable. INCLUDED: The Scientific Industries Bead Genie™, 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA DB 4.4 Round Bottom Tubes Dry Block (12/13 mm)

Holders for viscometer tubes for in a viscosity bath. Various types: Ubbelohde (sold) , Cannon Fensk (more)e opaque, Ostwald U-tube etc. Holders 40 various pieces. Viscosity glass 31 various pieces available Price/pc: € 26,=  (holder)

Detection Modes: Fluorescence Intensity – including FRET Fluorescence Polarization Luminescence  (more)(flash and glow) Time-Resolved Fluorescence – including DELFIA UV/Vis absorbance Measurement Modes: Top and bottom reading Endpoint and Kinetic measurements Sequential Multi Excitation measurements Sequential Multi Emission measurements Simultaneous Dual Emission measurements Ratiometric measurements Well Scanning Microplate Formats: 6 to 384-well plates, user-defi nable Microplate Carrier: Accomodates two plates: one reagent plate and one measurement plate Light Source: High energy xenon flashlamp Detectors: Side window photomultiplier tube Optical Filters: Excitation and emission filter wheels for 8 filters each Spectral Range: 240 to 740 nm or 240 to 900 nm Sensitivity: FI: < 1 fmol / well Fluorescein FP: < 5 mP standard deviation at 1 nM fluorescein TRF: < 70 amol/well Europium LUM: < 30 amol/well ATP, DLReady certified ABS: Dynamic range: ±0.000 – 4.000 OD, Reproducibility: ±0.010 OD for 0 – 2 OD range Read Times: Flying mode: 14 s (96), 27 (384) Reagent Injection: Up to 2 built-in reagent injectors Injection at measurement position (6 to 384-well) Individual injection volumes for each well (3 to 350 µL) Variable injection speed up to 420 µL / s Up to four injection events per well Reagent back flushing Pipettor System: Injection volume: 0.5 µl – 100 µl Individual injection volumes for each well Variable injection speed Plate-to-plate transfer + 3 reagent stations + washing station Shaking: Linear, orbital, and double-orbital with user-defi nable time and speed Gas Vent: System to inject an atmosphere or to pull a vacuum into the reader Incubation: +5°C above ambient up to 45°C or 60°C Equipped with the following filters: Em: 510 – 520 – 530 – 590 – 630 nm Ex: 355 – 390 – 405 – 436 – 440 – 485 – 510 – 544 nm Dimensions (h x w x d): 300mm x 780mm x 530mm Weight: 55 kg 230V / 50-60Hz

Stainless Steel HRP.H Platform Wherever high readability and precision are important. Wherever good  (more)repeatability in harsh industrial conditions matters. Stainless Steel HRP.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Unbreakable Stainless Steel HRP.H Platforms feature a modern electromagnetic mechanism design in a sealed steel housing and overload protection. The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. Stainless Steel HRP.H Platforms are distinguished by a high degree of protection IP 67. For an additional charge we will make HRP platforms in Ex version, but in order for the device to work in explosive areas, you need to supply the PUE HX5.EX terminal. Use the potential Stainless Steel HRP.H Platforms work with one of two weighing terminals: PUE HY10 or PUE 7.1. The terminals&rsquo; software enables you to archive your work results, ensures data safety, and allows the platforms to work with powerbanks from our offer. In turn, you will select appropriate antivibration tables for the platforms, and thus increase the readability of your measurements.

DP-7 Additional weighing platform module for PUE 5.15, PUE 5.19 Expand the capabilities of your term (more)inal Enhance the functionality of your weighing system with the DP-7 module from RADWAG, a leader in precision weighing innovations. This advanced module allows for the easy and convenient connection of an additional weighing platform to your terminal, enabling more comprehensive analysis and faster data processing.

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean &ndash; operator does not touch moisture analyzer&rsquo;s housing. Removing any shocks caused by manual closing of the chamber &ndash; the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and &ndash; thanks to databases &ndash; particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7&rdquo; capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M &ndash; the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D &ndash; the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R &ndash; the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g &ndash; the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Heidolph Multi-Channel Pump Head C12 Features: - Accepts 12 cassettes small - Built-in reduction gea (more)r allows feeding of smallest quantities - 8 rollers minimizing pulsation - Increase your throughput by running up to 12 cassettes small on one single pump drive and pump head system - Separate metering into multiple vessels with different feed rates in a single operation by using different tubing dimensions to adjust flow rate - Save time: tubing change is done in just seconds - Change your cassettes easily, even during operation – there are no restrictions - Cassette adjustments and changes are simple, just click in place - No additional purchase of a pump drive needed: upgrade your single-channel pump drive with just one adaptor for multi-channel use and pick the head/cassette configuration that matches your application needs These pump drives can be configured for multi-channel use: - Hei-FLOW Core 120 - Hei-FLOW Expert 120 - Hei-FLOW Ultimate 120 INCLUDED: The Heidolph Multi-Channel Pump Head C12 includes: - 3 Year Manufacturer's Warranty

Accuris SmartDrop L Nano Spectrophotometer Wavelengths 260, 280, &amp; 600nm (Fixed) Display 7-inch  (more)High Resolution Color Touch Screen Absorbance Precision 0.005 A Features - Quick and accurate results from a sample droplet - Ideal for basic DNA/RNA/Protein quantification and purity - Affordable LED and silicon detector technology provides readings at 260 and 280nm - Fixed 0.5mm path length, detects up to 2500ng/ul of dsDNA - Touch screen control panel - No PC or software required for operation - Built-in printer and cuvette port for OD600 readings - No PC or special software required - USB port featured for data transfer The Accuris SmartDrop™ series of nano spectrophotometers provides quick and easy quantification of small samples. Utilizing a small sample volume eliminates the need for dilutions, providing more accurate results. A full color, 7” touchscreen with icon-driven menus and preprogrammed protocols gets users up and running quickly. No external computer is required. Each unit features a quartz pedestal onto which a drop of sample is placed. The arm is lowered and the drop is stretched into a liquid column of specified length for spectral analysis. DNA, RNA and protein concentrations and purity numbers are displayed in a matter of seconds. The resulting data can be printed, saved in the SmartDrop’s onboard memory or exported via USB as an Excel file. All SmartDrop models include an integrated printer. For OD600 readings, each model includes a cuvette port and two optical glass cuvettes. Three SmartDrop models are available to meet a range of applications and budgets. This Accuris SmartDrop L Nano Spectrophotometer is the affordable choice for laboratories needing to determine nucleic acid and protein concentrations and purity of samples. The LED light source and silicon photocell sensor provide readings at 260 and 280nm. Samples from 1.0 to 2.0ul are loaded directly on the pedestal. Results are provided in about 5 seconds. The software automatically calculates and displays 260/280 ratios. INCLUDED: The Accuris SmartDrop L Nano Spectrophotometer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty