Chiller Microcool MC 250 LAUDA

ECO Silver Lauda - Cooling Thermostat LAUDA ECO with reliable technology and modern design for tempe (more)rature ranges from -50°C to 200°C depending of the models. Microprocessor management and integrated cooling system. Silver (monochromatic LCD graphic display), both equipped with mini USB interface. They are distinguished by their range of functions, ease of use and clarity of the display, allowing maximum comfort of use for the operator. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Refrigerated thermostats comes standard with tank lid, pump connections and are available with air and water cooling. A drain cock on the back of the device makes changing the liquid in the tank easy and safe.Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system MAIN FEATURE • Monochrome grafic LCD display for simultaneous indication of actual and set value • User friendly menu navigation in plain language • Easy input via cursor and soft keys. Additional Tmax key for overtemperature protection • Fully electronic continuous controller with PID action • Safety class III for operation with flammable and non-flammable liquids. Overtemperature cut-out adjustable via menu • Vario pump with six adjustable performance levels • Easy control of the flow rate between internal and external circulation during operation without contact with the bath • USB interface as standard • Upgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module) • Upgradeable with Pt 100/LiBus module for external control and remote control via Command console • Integrated programmer, 1 programme with max. 20 segments • Pump connectors with plastic nipples 13 mm as standard • Bath vessel made from stainless steel with drain valve • Condenser cooling Air • Utilizes natural refrigerants Graph of cooling performance of ECO Silver LAUDA cryostats. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Pump connection: Outflow and return with fittings 13 mm diameter (plastic) 2 - Bath cover 3 - Front grip recess 4 - Ventilation grill (both sides) 5 - Front panel (removable without tools) 6 - Four feet 1 - Rating label 2 - Control cable of cooling underpart (only with RE 1050 S) 3 - Rear grip recess 4 - Connecting lead between the control head and cooling underpart 5 - Bath draining tap 6 - Bath drain point 7 - Ventilation grill

Circulation chillers for reliable continuous operation in laboratory and research applications from  (more)-10 to 40°C The LAUDA Microcool line, simple, easy to use, consists of four compact models with large LED display and membrane keyboard, which offer cooling capacities from 0.25 to 1.2 kW. The strong point of these devices is the high-quality centrifugal pump with magnetic coupling - unique on the market for this price category: the magnetic coupling of the pump and the electric motor prevents any kind of sealing problem on the pump shaft. The MC 250 and MC 350 models easily fit on a laboratory bench. Larger models MC 600 and MC 1200 with 600 and 1200 watts of cooling capacity are also available, which can be placed on the floor or under a laboratory bench to save space. In addition, the MC 1200 W, the most powerful device, is also available in a water-cooled version. Notable features - Auto start timer and auto power off function - Top filling opening, drain connection on the back - Cooling capacity adapted via solenoid valve control, including automatic compressor control Examples of specific applications - Rotary evaporators - Distillation systems - Spectrometers - Supply of cooling traps - Digital print - Laser cut - Spot welding - Injection molding - Tunnel drilling machines - Centralized cooling water supply Accessories included Nozzles for pump connections; screw cap Performance graph of the pump of the LAUDA Microcool CHILLER. Simple three button control panel, with display and three LED indications: heat transfer liquid required; active cooling unit; device error. Connections on the back of the Microcool: RS232; drain screw; external alarm output. Connections on the back of the Microcools: inlet/outlet pump connection; overflow connection. Front liquid level indicator. Front cover for filling. Front panel of the Microcool LAUDA easily removable for fast filter maintenance. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Level indication 3 - Operating unit 4 - Pressure gage 5 - Front panel with ventilation openings 6 - Four casters with locking brake 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Overflow connection 5 - Rating label 6 - RS 232 interface 7 - Alarm output 8 - Power supply 9 - Drain screw 10 - Ventilation openings 1 - Display 2 - LEDs 3 - Control buttons 4 - Main switch Liquid level indicator a - Max. level b - Min. level Pressure gauge The models with bypass (MC600 and MC1200) are equipped with a pressure gauge to read the set pressure.

The compact FL circulators are suitable for a wide range of cooling tasks and can be placed under th (more)e laboratory bench in a space-saving way. Operating temperature range: -20°C to 40°C Temperature range: -20 to 40 °C Temperature stability: ±0.5°C Temperature setting resolution: 0.1°C Temperature display resolution: 0.1°C Permissible ambient temperature: 5°C to 40°C Maximum return temperature: 80°C Cooling capacity (medium: Ethanol): 20°C: 1.2 kW 10°C: 1 kW 0°C: 0.9 kW -10°C: 0.6 kW -20°C: 0.3 kW Filling volume: 570 g Coolant: R449A Pump capacity flow rate: 23 l/min Pump capacity discharge pressure: 1 bar Dimensions (WxDxH): 500 x 760 x 640 mm Filling volume: 12 to 17 l Weight: 78 kg

Perkin Elmer C6 Chiller This was removed from a university lab where it was surplus to requirements. (more) The unit powers up but we were unable to test tit further. It is in good cosmetic condition with minor marks from use.

ABB Extrel Mass Spectrometer w/ Pumps, Chiller & Various Parts This was removed from a universit (more)y lab where it was surplus to requirements. All units have been powered up unless specified. It is in reasonably good cosmetic condition with minor marks. Molecular Beam System: TPU 240 Pfeiffer Balzers PM P01 620 Turbomolecular PumpModel: TPU 240Serial#: 12087358 Item is in good cosmetic condition.Unable to test. Edwards Active Pirani GaugeModel: APG-M-NW16Serial#: 006737606Untested Pfeiffer Vacuum TMH 520Model: TMH 520 ISSerial#: 12392520Untested Edwards E2M 28 Vacuum PumpModel: E2M 28Serial#: 10020344kg Mass Spectrometry Stack on frame consists of: Extrel Core Mass SpectrometersModel: Merlin QMS ControllerSerial#: 28934 ABB Extrel Quadrupole Mass SpectrometryModel: 150-QC Quadrouple Power SupplySerial#: 24512 ABB Extrel Quadrupole Mass SpectrometryModel: QMS DC Power SupplySerial#: 23678 Edwards Active Gauge ControllerModel: Active Gauge ControllerSerial#: D38655000 Extrel Quadruple Mass Spectrometry FanModel: N/ASerial#: 24561Untested. Pfeiffer Vacuum TCP 380 X 2Model: TCP 380Serial#: 7019428 MKS Baratron Power Supply and DPMModel: N/ASerial#: N/A Additional Parts: Edwards 18 E1M18 Rotary Vane Vacuum PumpModel: E1M18Serial#: 00672735835kg Edwards 2 E2M2 Rotary Vane Vacuum PumpModel: E2M2Serial#: 0503530kg Particle Measuring System Inc Condensation Particle CounterModel: 761003Serial#: 816Date: Feb 1996 Pfeiffer Vacuum TCP 380Model: TCP 380Serial#: 7019428 Pfeiffer Blazers TCP 120Model: TCP 120 ASerial#: S4758 Horiba Triax Series 180 triple grating spectrometerModel: Triax 180Serial#: 0109-02-97 EMS Microtron 200 Microwave Power Generator Mark 3Model: Microtron 200Serial#: 111272 Julaba FE500 Compact recirculating coolerModel: FE500 GBSerial#: 9610050 4

Mettler Toledo KF-oven sample changer Stromboli. In combination with the Karl Fischer compact titrat (more)ors C30 and V30 the Stromboli sample changer enables up to 14 samples to be titrated in unattended operation. The samples are automatically transferred into a temperature controlled oven from where the evaporated water is transferred to the titration cell via an applied gas flow.

This Perkin Elmer Spectrum GX FT-IR System was removed from a university lab where it was surplus to (more) requirements. We had the instrument inspected by a service engineer who reported that the unit powers up, but the IR source does not power up and the window is moisture damaged. The beam splitter looks fine and the laser powers up. There is a PC with the unit it has Spectrum Software program version 5.3. on it. The unit also comes with the following: 1x Perkin Elmer Part 1x Thomas PumpModel: 107CCD14TFFL-621The unit powers up 1x RS-232 DE-19 Cable 3x RLT-GNP1000-02 It is sold for spares/repairs.

This Sutter Instrument Co. Model P-87 Flaming / Brown Micropipette Puller was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up and is in reasonably good cosmetic condition, however, it does have a small Crack on its right side. It was tested with a digital thermometer (not included), and the filament does heat up.

VACUUBRAND BVC Basic Fluid Aspiration System Control Range 100 to 500 mbar Collection Bottle 4L Pol (more)ypropylene Max. Back Pressure (abs.) 1.1 bar Features - Mechanical vacuum regulator and integrated check valve to provide optimum working vacuum and minimize the vapor load on the vacuum network. - Stable base and electricity-free operation for convenience. - Autoclavable collection bottle designed to reduce aero­sol and foam formation; autoclavable quick-couplings available as accessory. - Aspiration hand set VacuuHandControl (VHCpro) with flow-through suction tube - no contamination of handle by aspirated media. - Hydrophobic 0.2 µm sterilizable filter - contamination risks for the vacuum pumping system are greatly reduced; autoclavable as complete unit together with the collection bottle. The BioChem-VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network (e.g., VACUU·LAN®) and does not require electric power. The chemical-resistant mechanical vacuum controller always ensures an optimal operating vacuum. The controller opens only when needed thus limiting the gas load on the vacuum source. The evaporation of collected liquid is minimized. The inlet tubing integrated in the bottle head reduces aerosol and foam formation and ensures a long service life of the hydrophobic protection filter. The aspiration system is available either as BVC basic with 4l PP bottle or as BVC basic G with 2l coated borosilicate glass bottle. INCLUDED: The VACUUBRAND BVC Basic Fluid Aspiration System includes: - Complete Fluid Aspiration System for current Vacuum Source - Hose Nozzle DN 6/10mm - VacuuHandControl VHC Aspiration Hand Set - 4L Collection Bottle - Protection Filter - Operator's Manual - 1 Year Manufacturer's Warranty

Hermle Z207-M Centrifuge w/ 24 x 1.5/2.0ml Rotor Due to the compact design, the Microlitre Centrifug (more)e Z207-M, is applicable even in the smallest laboratory setting. There are two rotors available, the 24-place microlitre rotor either with snap-on lid or hermetically sealed lid, and the rotor for Spin Column Kits. Of particular note is the innovative control panel with Touch-function. FeaturesMicroprocessor with large LCD displayElectrical lid lockPre-selection of the rotor typeQuick access to samplesActive imbalance identification and cut-offAir Cooling SystemQuick Acceleration and DecelerationNoise level < 60 dBA at max. speedEasy rotor exchangeManufactured in accordance to InternationalSafety Regulations, i.e. IEC 61010Quick acceleration and deceleration within 13 seconds Distinct Control PanelControl panel with Touch-OperationSimple one-handed operationEasy to program with gloves onSplash-proof foil keyboardPermanent indication of pre-set and actual valuesSelection of speed in both rpm and g-force, in increments of 1010 acceleration and deceleration rates, possibility of unbraked decelerationPre-selection of the running time, from 10 s to 99 h 59 min or continuousStorage of up to 99 runs, including rotorQuick-key for short runs Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z207-M Centrifuge includes: - 24 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty