Buchi B740

Metrohm 682 Titroprocessor . Titroprocessor from Metrohm, model 682 with integrated printer. Technic (more)al specifications: 220 V, 50 Hz, 120 VA. External dimensions (DxWxH): 46 x 15 x 36 cm. Suitable for endpoint titration, Karl Fischer titrations and equivalency titrations.

Siemens VersaCell sample manager for use with a Siemens Immulite 2000 XPi Immunoassay System. Note:  (more)110 V system!

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Ohaus i-DF33XW2500C1R Defender 3000 Washdown Floor Scale, 2500 lb., 0.5 lb. Maximum Capacity 2500 lb (more). (1,250 kg) Readability 0.5 lb. (0.2 kg) Platform Size 3 x 3 ft. (914 x 914 mm) Features - Weighing, Checkweighing, Counting, Totalization - 7 Segment LCD with multicolor backlight - Internal power supply with power cord (included) or rechargeable battery (included) - Standard RS232 and optional USB Device or Ethernet - 304-grade stainless steel IP66 indicator, 5mm / 0.196in. fixed top plate, stainless steel platform, IP68 stainless steel junction box with side access, IP68 load cells, stainless steel ramp available - Four load cell mounted feet with self-swiveling ball-in-cup design, painted and stainless steel floor stands (available as accessories) The Ohaus Defender 3000 Floor Scales meet dry or washdown weighing needs in industrial and commercial use. Their high-quality construction is designed to minimize flexing under heavy loads for years of dependable performance. The indicator features a bright display that can change color when in check mode. Scale also includes counting and totalization modes. Stainless steel bases include IP68 loadcells for wet areas. Ramps and mounting plates are available. INCLUDED: The Ohaus i-DF33XW2500C1R Defender 3000 Washdown Floor Scale, 2500 lb., 0.5 lb. includes: - 2 x Eyebolts - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Roto-Mini Rotator with Tube Holders Benchmark’s new Roto-Mini series of rotating mixers pr (more)ovide a wide range of mixing capabilities. Suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, etc. the mixers include interchangeable tube holders for accommodating all common tube sizes from 0.5ml to 50ml. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing. Included tube holders hold capacities of 11 x 1.5/2ml, 5 x 5-7ml, 5 x 10/15ml, and 6 x 50ml with 24 x 0.5ml. Click Here to View Product Video INCLUDED: The Benchmark Roto-Mini Rotator with Tube Holders includes: - Tube Holder, 11 x 1.5/2.0ml - Tube holder, 5 x 5-7ml - Tube holder, 5 x 10-15ml - Tube holder, 6 x 50ml - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Chamber dimensions (Ø x depth): 500 x 500 mm Capacity: 117 L See for additional info: https://www.sy (more)stec-lab.com/autoclaves/vertical-top-loading-autoclaves-40-150-l/

This Thermo Scientific VersaCool Refrigerated Circulating Water Bath was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in very good cosmetic condition. It was tested with a digital thermometer (not included). Heating:-Tested with water, the temperature was set to 37˚c, the temperature quickly went up to 38˚c while the thermometer read 37˚c. It was then tested up to the maximum temperature (for water) of 90˚c which it reached after around 10 minutes, thermometer also read 90˚c. It can go higher but we didn't want it to boil. It is rated for 150˚C. Cooling:-Tested with Antifreeze, the temperature was set to -20˚c, it dropped quite quickly to -8˚c but seemed to stop cooling from there, only dropping a further 0.3˚c over the next few hours. The thermometer read -9.6˚c. This is likely due to the concentration of antifreeze used.

Buehler Abrasimet 2 Abrasive Cutter 95.C/800.400 This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and has been connected to the pump. It is in good working order. It is in reasonable cosmetic condition with the expected kinds of marks from use for a piece of equipment like this. Model Type - 95.C/800.400SN - 495.MSC.1956 Metaserv Spindle Speed 3600 rpmDisc size - 250 x 1.5 x 32mm Disc Size: 250mm Arbor Size: 32mmWheel RPM: 2830 RPM Vice cutting capacity: 80mm - 75mm diameter Safety features: Emergency stop, safety switch, electronic break Coolant connection size: 12.5mm Drain size: 32MM ID 34MM OD Coolant tank size: 23 Litre Power: 3 PHASE - No neutral Dimensions: : 800 x 550 x 450 mm  Tank Container dimensions - L50 W36 H29cmThe lid with the pump doesn't fit the tank.

F2 Mass Standard - carrier weights. Nominal value - 200 g.

KNF LABOPORT SR 820 G IP30 Diaphragm Pumping System Ultimate Vacuum 6 mbar Maximum Flow Rate 20L/mi (more)n (1.2 m3/h) Protection Class IP30 Features - Ideal for extremely aggressive/corrosive gases and vapors - High level of vapor and condensate compatibility - Integrated gas ballast valve - Integrated rotational speed control - 3-color status display for in operation / stand-by / error - Compact, quiet and reliable - Start against ultimate vacuum of the pump - Modular expandable - 100% oil-free transfer - Environmentally friendly The KNF LABOPORT SR 820 G IP30 Diaphragm Pumping System is a chemically resistant vacuum pump system comprising chemically resistant diaphragm vacuum pump, base plate and two separator flasks on suction and pressure side. Based on the high level of vapor and condensate compatibility the system is perfectly suited for extremely aggressive / corrosive gases and vapors. INCLUDED: The KNF LABOPORT SR 820 G IP30 Diaphragm Pumping System includes: - 2 x Coated Collection Flasks - 2 x Flask Clamps - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark MyFuge Mini Centrifuge The MyFuge Mini Centrifuge is a personal centrifuge that virtually  (more)fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples. An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2ml PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge. When the rotor is not in use, storage in this compartment prevents loss or misplacement of the rotor. Click Here to View Product Video INCLUDED: The Benchmark MyFuge Mini Centrifuge includes: - 8-Position Microtube Rotor - PCR Strip Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty