Radwag TMX15C.15.F1.K Multifunctional Scale

Manufacturer: Applied Biosystems Model: 9800 Fast Thermal Cycler PCR System P/N: 4349441 S/N: 298000 (more)818; 298010874 YoM: 12.2005 Description: The 9800 Fast PCR System is the first integrated system optimized for trouble-free fast PCR performance. Applied Biosystems is the most trusted name in PCR. This PCR System is the first fully-integrated fast PCR solution designed to significantly shorten your time-toresult. The 9800 Fast PCR System reduces PCR reaction time from 2 hours to 25 minutes or less, getting you on to the next step of your research more quickly than ever before. The system is optimal for service labs looking for faster turnaround times, or for researchers sharing a single system where time-savings can be especially beneficial. The 9800 Fast PCR System is ideal for speeding up the PCR process. Based on the proven engineering of the GeneAmp PCR System 9700, the 9800 Fast Thermal Cycler is designed to considerably reduce PCR reaction time. Often, 500 bp fragments can be amplified from a genomic DNA background in 25 minutes. With faster amplifications, you still achieve the same level of performance and reproducibility that make Applied Biosystems instruments the standard for reliable thermal cycling. In addition, the system includes a Standard Mode for traditional protocols. The 96-Well Fast Thermal Cycling Plate is an integral component of the 9800 Fast PCR System. The plate has been optimized for 20 µL fast PCR reactions and is designed to fit with the 9800 system sample block. Features: Unmatched speed and performance:- PCR reaction times from 2 hours to 25 minutes or less- Superior reproducibility with uniform heating and cooling- Specificity and sensitivity with hot start chemistryOptimized for convenience:- Integrated 96-well system designed for fast results- Convenient master mix delivers consistent performance- Superior quality 96-well plates optimized for fast PCRResults you can count on:- Extending the family of proven PCR solutions- Authorized Thermal Cycler for PCR- Fast and Standard Modes to address your current and future PCR needs Specifications: Applied Biosystems 9800 Fast Thermal Cycler:- Format: 96-well- Thermal Non-Uniformity:(95ºC, 10 seconds after clock start): < 0.5ºC(55ºC, 10 seconds after clock start): < 0.5ºC- Block Temperature Accuracy: ± 0.25ºC, over the temperature range 35–100ºC- Temperature Range: 4.0–99.9°C- Ramp Speeds: Heating: 5.0°C/secondsCooling: 4.1°C/seconds- Choice of Ramp Modes: Fast and Standard Mode- Sample Temperature Control- Cycle Speed: < 10 minutes to uniformity cycle samples from 94°C, 0 seconds to 64°C, 0 seconds, 25 times- Power: 240 VAC 50-60 Hz 850 VA- Dimensions (H x W x D): 26 x 30 x 52 cm - Weight: 12 kg 96-Well Fast Thermal Cycling Plate:- Format: 96-well SBS standard- PCR Volume Range: 20 µL (recommended) Min./Max. 10-30 µL- Total Well Liquid Capacity: 100 µL (max.) Items delivered: - Applied Biosystems 9800 Fast Thermal Cycler PCR System- Instruction Manual as PDF via E-Mail request Condition: This PCR system is in very good cosmetic as well as operating condition. It is 100% functional tested and ready to be used.

Thermo Scientific Cytomat Microplate Hotel This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. We have no key for the lock, but it is unlocked.

Eppendorf 14 x 15ml Conical Adapters, Cat. # 5825734009 Eppendorf 14 x 15ml Conical Adapters, Cat. # (more) 5825734009 for S-4-104 rotor. This is a 2 piece set, and the adapters are new in the packaging. For use with the Eppendorf 5810/R Centrifuges. INCLUDED: The Eppendorf 14 x 15ml Conical Adapters, Cat. # 5825734009 includes: - Full 6 Month Parts and Labor Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Dolomite Mitos P-Pump System With Remote Chamber 400 + Flow Rate Sensor This was removed from a univ (more)ersity lab where it was surplus plus to requirements. All units power up but have not been tested further. It is in reasonably good cosmetic condition with minor marks from use. Included are; Includes: -Dolomite Mitos P-Pump-Dolomite Mitos Remote Chamber 400-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor-P-Pump user manual-Remote chamber 400 manual-Sensor manual P-Pump model number- 3200016_4P-Pump serial number- 1600680 Chamber serial number- 490174u7 Sensor serial number- 4903648

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: stainless steel wire Nominal value: 200 mg Material: stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1&rdquo; colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal&rsquo;s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.