BRAND NEW ! Siemens Simatic 6AV6 644-0AB01-2AX0 MP377 15 Zoll Touch Multi Panel

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Recessed construction of painted steel with welded corners on 4 sides mounted on a monoblock frame.

VACUUBRAND MD 1C +AK+EK Chemistry Vacuum System Ultimate Vacuum 2 mbar Max. pumping speed at 60 Hz (more) 0.88 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and very low vibration - Excellent environmental friendliness due to efficient solvent recovery This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors. This system is usable for increased vacuum requirements with high boiling solvents and often replaces rotary vane pumps. Typical applications are rotary evaporators and vacuum drying ovens. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment.INCLUDED: The VACUUBRAND MD 1C +AK+EK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco CentriVap Solvent System INCLUDED: The Labconco 7995810 CentriVap Solvent System, 115V,  (more)60Hz includes: - Benchtop Vacuum Concentrator w/ Glass Lid - Cold Trap -84°C - 12-13 mm Rotor 7455100 - Clear Canister 7460900 - Solvent Insert 7815200 - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA MS 450 Swirler Type of Movement Orbital Speed Fix 450 RPM Shaking Strole 4.50 mm Features - Con (more)tinuous operation - Simple to use - Only mixes at one speed. Reduces possibility of damaging your solution. - Sturdy zinc die cast casing - Typical mixing time 15-20 minutes - Spare foam inserts available, item # L005338 - Compatible with all MS3 basic accessories - May use with microtiter plate attachment, item # 3426400 The MS450 Swirler is the ideal solution for mixing lyophilized powder with sterile water for injection (SWFI). It gently mixes up to 8 vials at a fixed speed of 450 rpms, ensuring the integrity of your solution. Designed for continuous operation, this simple-to-use mixer reduces the possibility of damaging your solution by operating at a single speed. Its sturdy zinc die-cast casing ensures durability. With a typical mixing time of 15-20 minutes, the MS450 is compatible with all MS3 basic accessories and can be used with a microtiter plate attachment. It features an orbital movement with a 4.5 mm shaking stroke and a permissible shaking weight of 0.5 kg.

Volume air recirculation: 1205 m³/h Volume air exhaust: 494 m³/h Volume air total: 1699 m³/h Air flo (more)w: 0.45 m/s Internal dimensions (WxDxH): 1535 x 600 x 655 mm Dimensions (WxDxH): 1625 x 790 x 1380 mm Height support frame: 800 mm Weight: 290 kg

Sensitivity range: 1 µS/cm – 999.9 mS/cm Noise: ±0.5% full scale calibrated range Internal volume: 1 (more)4 µL Flow rate range: 0-100 mL/min Maximum operating pressure: 50 bar Dimensions (WxDxH): 245 x 150 x 100 mm

Leybold Sogevac SV100B Model no. SV100 109 10 Rotary Vane Vacuum Pump This was removed from a unive (more)rsity lab where ti was surplus to requirements. The pump has been professionally serviced and recertified. It has had a new oil mist filter, oil filter and oil. It is in full working order. It is in excellent cosmetic condition.

Yamato RE-202-A Rotary Evaporator with Oil Bath and Selectable Glassware, 115V Speed Range 5 to 315 (more) RPM Evaporation Capacity Up to 23 ml/min Rotation Modes Forward/Reverse/Auto Inversion Features - Rotate faster & slower (315 RPM – 5 RPM) than any other rotary evaporator on the market to test new SOPs and develop better methods - Unit is easy to disassemble and clean after use - Program rotation direction changes, ramps, and other automations to get more done in the lab at once - Automatic on/off and suction speed adjustment via wireless vacuum controller - Easily analyze the residue left over after distillation - Orient for left or right-handed operation based on your limited bench space Standard rotary evaporator designed with a slide jack mechanism for convenient height adjustment. Set includes the BO302-A Oil Bath and your choice of glassware. Market leader in rotation speed range at 5 to 315 RPM. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato RE-202-A Rotary Evaporator with Oil Bath and Selectable Glassware, 115V includes: - Glassware Set Selected Above - BO302-A Oil Bath - Rotary Joint - 1L Evaporation Flask - 1L Receiving Flask - Ball Joint Clamp - Flask Clip - Vacuum Seal - Condenser Insulation Kit - Condenser Bracket (Only for Glassware Sets B & C) - Hex Wrench - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 105 mm Material: stainless steel with a silicone tip for standards up to 50 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).