Bacoeng Vacuum Chamber

The Hygiena EnSure luminometer is a quality assurance system that can check and detect swabs for the (more) presence of ATP (Andenosine Tri Phosphate) within 15 seconds. The presence of ATP may indicate biological contamination. In locations such as hospitals, it is extremely important that proper cleaning is carried out. With the use of the EnSure, it can be scientifically proven within seconds that the cleaning has been done properly. Implementing a monitoring system to validate cleanliness has been shown to increase compliance with cleaning procedures from 40% to 82%. The main difference with the Hygiena SystemSure luminometer is that the Ensure is more sensitive and can detect up to 0.1 femtomole ATP. The EnSure uses the latest photodiode sensor technology, which has superior sensitivity and stability. In addition, the design is made in such a way that the luminometer is easy to operate with one hand. The luminometer works on two AA batteries for a long battery life, you can use an average of 8-12 months of continuous use before the batteries need to be replaced. Measures ATP, High Sensitivity ATP/Allergen Prevention, TVC, Enterobacteriaceae, Coliforms, E. coli, ALP, and ACP test devices Sensitive – can detect down to 0.1 femtomoles of ATP Advanced photodiode sensor technology – Internal solid-state detector is not affected by drops or shakes Storage: 100 programmable test plans 200 programmable user IDs 251 programmable locations per test plan 5000 programmable test locations Small, lightweight, handheld instrument (250 g, 70 x 180 x 30 mm) Quick-test mode enables ad-hoc testing Large screen with back-light and optional BOLD text Powered by 2 x AA batteries for several months of uninterrupted use Removable read chamber design allows for easy cleaning Durable outside shell and sealed keypad to protect against splashes and wear

The Bio-Orbit 1253 manual luminometer has been developed to provide maximum convenience and ease of  (more)use for luminescence measurements wherever you need to make them. The 1253 is intended for use with continuous light output reagents, whereby all the reaction constituents are added to the cuvette before loading into the measuring chamber. Measurement is initiated simply by pressing the “START” key, the 1253 will then determine the integrated light emission over a 1 second period. This value can then be read immediately from the liquid crystal display. The display gives a four digit read out with a floating decimal point, thus giving a display range from 0.001 to 9999 relative light units (RLU). A background subtraction facility enables an entered background value to be automatically subtracted from all subsequent samples tested. Detector: side-window type photomultlplier tube Principle of measuring: photon counting Range: 0.001-9999 RLU Sensitivity: 0.8 femtomoles of ATP per assay Cuvette size: Diameter 11 – 12.5 mm, height 49 – 70 mm Dimensions (LxWxH): 305 x 265 x 120 mm Weight: 3.9 kg

Interfurn Drawer Door Cabinet, RT Creme 600x600x490

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-39135 Fisher Scientific Power 608 ITEM-39137 Apelex ps 608 ITEM-39138 Apelex PS 608 ITEM-39139 Bio-Rad 2110 Fraction Collector ITEM-37095 Phenomenex DEGASSEX DG-4000 ITEM-37097 Hewlett Packard series 1100 waste bottle tray ITEM-37098 Agilent Technologies Waste Bottle Tray ITEM-39142 Apelex PS 304II ITEM-39143 Apelex PS 304II ITEM-25295 Mettler Toledo AG104 Digital Analytical Balance Laboratory Scales Lab ITEM-25809 Bibby Scientific Stuart Orbital Rotator SB3 Lab ITEM-11323 Thermo Scientific Barnstead RO Model 7155 Water Purification System Purifier Lab ITEM-39144 Techne Dri-Block DB-2A ITEM-41034 man150m fan x 2 ITEM-39145 Techne Dri-Block DB-2A ITEM-37102 Unicam Flow-Through Cell-(Boxed) ITEM-24751 Boekel UV Crosslinker Lab - No Bulbs. ITEM-40915 APC Back-UPS CS 500 ITEM-40916 Plastic Support Plate ITEM-40917 Bio-Rad Model 200/2.0 Power Supply ITEM-40918 Bio-Rad Power Pac 1000 ITEM-40919 Axon Instruments CyberAmp 380 ITEM-39149 Stovall The Belly DancerITEM-39150 Zeiss Microscope ITEM-39153 Swift M4000-D Microscope ITEM-39154 Bio-Rad Model 2110 Fraction CollectorITEM-39156 Techne Mini Centrifuge ITEM-39157 Life technologies tfx-20M ITEM-39158 Hancocks light box ITEM-39159 Jencons scientific light box ITEM-39160 IKA-Vibrax-VXA ShakerITEM-39059 Bio Rad 500ITEM-39060 AND Balance ITEM-39058 Consort E432ITEM-37105 Samsung Shoot and Share Memory Camcorder- boxedITEM-37106 JVC GR-D820 Camcorder ITEM-37107 JVC Everio Hard Disk Camcorder G SeriesITEM-37108 Perkin Elmer LC 240 Fluorescence Detector ITEM-39914 Horiba LY-201ITEM-41033 Olympus SZ40 Stereo Zoom Microscope

MSE Mark No2 Consolidation Testing System Controlled Rate of Strain 2726 This item was removed from (more) a university where it was surplus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

M1 Mass Standard - knob weights- set (1 mg - 1 kg), plastic box.

The MW-04-1 mass converter is designed to be a component of construction of an industrial load cell  (more)scale. Depending on the needs, communication can be established via RS232, Ethernet. The MW-04-1 mass converter can connect with weighing indicators or the PC. It is equipped with Inputs/Outputs enabling independent control of some industrial processes, e.g.: dosing. One MW-04-1 mass converter allows to operate up to 4 weighing platforms. Construction: The converter is housed in a metal casing. Signal cables of the weighing platforms (4 pcs maximum) are fed through cable glands. RS232 is available on the M12 8P connector, Ethernet may be fed through the PG11 cable gland. The device is equipped with an in-built power supply, this allows to power it directly from the mains. By standard the MW-04-1 mass converter supports 2 weighing platforms, optionally it can support 4. Area of use: Industrial load cell scales; Complex weighing systems supervised by computer system thanks to use of the Ethernet module; Connecting numerous weighing platforms to an industrial indicator; Dosing systems; Silo weighing; Discrete weighing (no weighing indicator) on a production line; Weighing in place with limited access, where instant readout of mass is not required, just record of weighings; Large embedded scales, where the converter is installed under the scale; Simple systems for chackweighing and result control Communication with the automation system due to an implemented MODBUS communication protocol. Indicator Software Functions: Designing formulas and dosing processes directly on the weighing indicator, Dosing and formulations (manual and automatic), Configuration of communication between formula making scales and actuators, Carrying out dosing and formulations on numerous platforms, Placing production orders for formulation (refers to PUE 5) with batches where the following is set: multiplier (quantity of formulation repetitions), source and target warehouse, user, scale. "Formulations" software makes use of the weighing indicators functionality to the maximum when it comes to their operation along with actuators, e.g. control of dosing valves. Additional advantage is the possibility to set an interrelated ingredient dosing on various platforms within one formulation process. Formulations and Dosing in the Industry: Industrial weighing indicators are designed on the basis of an innovative approach to formulation and dosing processes. Communication between the indicators and the modern MW-04 mass converters boosts the functionality of systems that realise both dosing and formulations. Communication interfaces enable placing the weighing platform and the indicator in a considerable distance one from another. Formulation process carried out using RADWAG indicators is highly popular in various areas of industry, the indicators enable either manual or automatic dispensing of many ingredients in accordance with a pre-defined formulation. Practically any product can be a formulation ingredient, either it is a loose material such as sugar, tea, grain, spices, powders etc. or liquid, this is possible thanks to appropriate automation. Compatibility with: PUE 5 Indicator; PUE 7.1 Indicator; PUE HY10 Indicator; PC.

Gilson PIPETMAN M P20M BT Connected, 2-20uL Pipette Volume Range 2-20uL Adjustable or Fixed Volume A (more)djustable Volume Pipette Type Electronic Air Displacement Features - Bluetooth-enabled electronic pipette enhances accuracy and precision in standard and repetitive pipetting modes - Reduces pipetting fatigue and increases efficiency with minimal force needed for aspiration and dispensation - Features motorized piston for high reproducibility and accuracy, reducing the risk of human error - Offers five pipetting modes: pipette, repetitive, mix, reverse, and custom with up to 10 programmable protocols - Bluetooth connectivity facilitates communication with TRACKMAN Connected, guiding through protocols with real-time feedback - Ergonomic design ensures comfort and ease of use, including a simple push-button operation and tip ejection The PIPETMAN M Connected is a Bluetooth-enabled electronic pipette that offers accuracy and precision in both standard and repetitive pipetting modes. Requiring virtually no pipetting forces to aspirate and dispense samples, PIPETMAN M Connected helps reduce pipetting fatigue and increase pipetting efficiency. The pipette interacts in real-time with TRACKMAN Connected making planning and executing pipetting protocols faster, easier, and more reliable. PIPETMAN M Connected is available in 20 models covering a volume range from 0.5uL to 10mL in single channel, and 0.5uL to 1200uL in multichannel. The motorized piston allows for high pipetting reproducibility and accuracy in all modes. Associated with TRACKMAN Connected and its PipettePilot application, PIPETMAN M Connected reduces the risk of human error by transferring verifiable pipetting parameters and commands in the pipette. The intuitive interface has five pipetting modes for many applications: pipette, repetitive, mix, reverse, and custom. Create and transfer up to 10 custom protocols from PIPETMAN M Connected Software into your pipette. Bluetooth connection enables communication with TRACKMAN Connected and helps guide you through your protocol telling you where, when, and how much to pipette with real-time interactions. Aspirate and dispense with one click of the push button and eject tips with ease. The lightweight and ergonomic design rests comfortably in your hand for maximum pipetting comfort. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN M P20M BT Connected, 2-20uL Pipette includes: - Power Supply 5V with AC Adapter and Cable - 4 Battery Side Tags - 4 Ejector Side Tags - Lubricant - Safety Bag - Certificate of Conformity - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Branson M3800H Mechanical Heated Ultrasonic CleanerFeatures - Sweep frequency eliminates standing wa (more)ves and creates consistent cavitation throughout the tank - 40 kHz rugged industrial transducers - Mechanical control located above and behind the cleaning tank in an easily accessible control tower panel and raised to avoid damage from cleaning solutions - Convenient built-in pour drains are featured on 0.5 and 0.75 gallon models, with tank drain valves incorporated on models 1.5 gallons and larger - Plastic body, chemical-resistant Easy to use mechanical timer for setting up to 60 minutes of operation, continous operation, as well as heating at 69°C/156.2°F Completely removes flux and contaminants from precision parts such as PC boards, SMDs, quartz crystals, capacitors, and many others Can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids Bransonic M and MH Series cleaners are known for offering a level of precision and reliability you have come to expect from Branson. M Series includes 60-minute mechanical timer and continuous operation. MH Series includes 60-minute mechanical timer and continuous operation with heating capability. M and MH Series cleaners offer the following features:Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change.Click Here to View Product Video INCLUDED: The Branson M3800H Mechanical Heated Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty