Agilent HP 9301-0713 ALS Syringe 10 µL Fixed Needle 23/42/Cone 41115714

3 axis

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Heating thermostat from 20 to 200°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of Gold immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels.

Konelab 30 is a random access clinical chemistry system for routine and special chemistries, includi (more)ng specific proteins, electrolytes, therapeutic drugs, and drugs of abuse tests. The broad range of CE marked applications can be complemented with user definable tests. Throughput Workload dependent, being in typical routine use up to 300 tests/hour. Time to first result is typically 3 to 12 minutes. Samples: Continuous access to samples without interrupting test processing. Integrated barcode reader and cup/tube recognition. Sample and tubes: 0.5 ml and 2.0 ml cups, 5 ml and 7 ml tubes, 10 ml tubes with tailored segments. Sample types: Serum, plasma, urine, CSF. Sample volumes: Possible range 1-120 µl ; typically 2-15 µl and 50 µl for Na+, K+ and Cl- ISE tests. Reagents: Continuous access to reagents without interrupting test processing. Automated indentification by integrated barcode reader. Real time reagent status clearly displayed. Up to four reagent additions / test possible. On board storage: 45 positions in the refrigerated reagent compartment. Photometric Measurement: Single channel interference filter photometer with beam splitting reference – 11 fixed filters. Spectral Range: 340-800nm. Measurement principles: Colorimetric, turbidimetric Measurement modes: Kinetic, end-point Kinetic measurement: 30 sec to 60 min, max 12 points Light source: Halogen lamp with linear absorbance range of 0-2.5A, resolution of 0.001A and reproducibility of SD≤0.005A at 2A. ISE Measurement in the model Konelab 30i Direct potentiometry: Electrodes for Na+, K+ and Cl- (included),  (upon request at manufacturer) Li+,Ca2+ and pH. Usable range: K+ 2.0 – 10 (mmol/l) serum, plasma Na+ 100 – 200 (mmol/l) serum, plasma Cl- 55 – 150 (mmol/l) serum, plasma Ca2+ 0.5 – 6.0 (mmol/l) serum, plasma pH 6 – 8.5 Li+ 0.2 – 4.0 (mmol/l) serum K+ 20 – 200 (mmol/l) urine Na+ 20 – 200 (mmol/l) urine Including: Powervar Uninterruptible power supply in case of power outage. Documentation and software Dimensions (h x w x d): 1150mm x 1200mm x 790mm Weight: 200kg 230V / 50-60Hz / 700W

Expanded bed adsorption (EBA) is a single pass operation to recover target molecules such as protein (more)s from crude stock feedstock without prior clarification. In extracellular processes, EBA is effective in capturing molecules from fermentation or cell culture. In intercellular processes with soluble molecules, it is suitable for use with broth from cell lysis or homogenization. Streamline columns are specially designed for use with Streamline adsorbents. Column design incorporates spacial flow distributors and a moveable adaptor. The distributor at the bottom of the column creates the stable fluidized bed required for the technique. The moveable adaptor allows the bed height to be adjusted for elution in sedimented bed mode. Diameter: 25 mm Column cross section: 491 mm2 Tube height: 1000 mm Stand foot print: 430 x 430 mm Sedimented bed height: 150 – 300 mm Sedimented adsorbent volume: 75 – 150 mL Max pressure: 1 bar Operating temperature: 4°C to 40°C Feed application: 200 – 400 cm/h Elution sedimented bed: 50 – 150 cm/h Elution expanded bed: 100 – 300 cm/h Chemicals used with Streamline 100 column: Acetic acid: Concentration – 25%, pH = 1.8; Time/cycle – 3 h Acetone: Concentration – 2%; Time/cycle – 15 min Ammonium sulphate: Concentration – 2 M; Time/cycle – 5 h Ethanol: Concentration – 20%; Time/cycle – 24 months Ethanol: Concentration – 70%; Time/cycle – 1 h Ethanol/Acetic acid: Concentration – 20%/10%; Time/cycle – 3 h Ethylene glycol: Concentration – 50%; Time/cycle – 3h Guanidine-Hydrochloric acid: Concentration – 6 M; Time/cycle – 5 h Glycerol: Concentration – 10%; Time/cycle – 3 h Hydrocloric acid: Concentration – 0.1 M, pH = 1; Time/cycle – 1 h Isopropanol: Concentration – 30%; Time/cycle – 3 h Sodium acetate/Ethanol: Concentration – 0.2 M/20%; Time/cycle – 24 h Sodium chloride: Concentration –  0-3 M; Time/cycle – 3 h Sodium hydroxide: Concentration – 2 M, pH = 14; Time/cycle – 24 h Sodium hydroxide: Concentration – 0.01 M, pH = 12; Time/cycle – 12 months Sodium sulphate: Concentration – 1 M; Time/cycle – 3 h Triton X 100: Concentration – 1%; Time/cycle – 5 h Tween: Concentration – 1%; Time/cycle – 5 h Urea: Concentration – 8 M; Time/cycle – 5 h