Rainin Pipet-Lite XLS 1 Kanal Channel Manual Pipette 0,5-10 uL

Yamato WH-501C Auto Pure High Capacity Di Type 2 & Type 3 Water Purification System, 120V Maximu (more)m Flow Rate 1.25 gpm / 4.7L/min Pressure Range 10 to 100 psi Temperature Range 40F to 100F Features - Turn-key system for low cost – on demand service - Resistivity light included for visual indication of cartridge replacement - Available in high purity and high capacity configurations - Available in 2-1/2″ and 4/1/2″ diameter configurations - Outlet isolation valve, spanner wrench and associated tubing provided - Economically produces DI water A pre-assembled cartridge system that provides deionized water using a staged filtration process. Water purification is provided using a three-stage process. High Capacity DI System- 4-1/2" Diameter (10" Carbon, (2) 20" High Capacity DI, & 20 K DI Light). Type 2 and 3 water quality. INCLUDED: The Yamato WH-501C Auto Pure High Capacity Di Type 2 & Type 3 Water Purification System, 120V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Microtips for the SFX Sonifier are available in four sizes to handle volumes up to 150 ml. The micro (more)tips are also designed to process samples in the smallest diameter vessels. This tip is for use with the Branson 150 watt SFX and SLPSonifier only. Processing Volume 10 - 150 ml Tip Diameter 1/4 in (6.4 mm) Approximate Length 4 in

Benchmark Heat Block, 12 x 15/16mm The Benchmark Block, 12 x 15mm or 16mm test tubes is for use with (more) any Benchmark Dry Baths. INCLUDED: The Benchmark Heat Block, 12 x 15/16mm includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Beckman Coulter 15ml Conical Adapters, Cat. #: 359472 The Beckman Coulter 15ml Conical Adapters, Cat (more). #: 359472 are for use with the Beckman GH 3.8 Swing Bucket Rotor and Beckman SX4750/A Swing Bucket Rotor. These adapters feature a capacity for 14 x 15ml conical tubes each with a maximum tube diameter of 18 mm. INCLUDED: The Beckman Coulter 15ml Conical Adapters, Cat. #: 359472 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Beckman Coulter 15ml Conical Adapters, Cat. #: 359472Bottom ShapeConicalRotor CompatibilityBeckman Coulter GH 3.8 and SX4750/A Swing Bucket Rotors

Accuris Gel Casting Set The Accuris Gel Casting set for 10.5 x 6cm gels, including stand, 2 trays, a (more)nd 2 combs (22/12 teeth) is for use with the MyGel System.INCLUDED: The Accuris Gel Casting Set includes: - 2 Double Sided Combs - 2 Casting Trays - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

PEAK Scientific PH600 Precision Hydrogen Generator This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up but we were unable to test it further. It is in good cosmetic condition with marks from use. It is sold for spares/repairs due to the nature of the instrument and that it is untested.

Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1060L (37.4 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP1060eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP1060eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP1060eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

F1 Mass Standard - knob weights with adjustment chamber - set (1 g - 50 g), wooden box Number of pie (more)ces in the set: 8 Weights 1 g i 2 g – solid masses without adjusting chamber

Bransonic accessories are designed to maximize theeffectiveness of your Bransonic baths. It is impor (more)tant that parts do not reston the bottom of the bath, as it can inhibit the ultrasonic activity andpossibly damage the unit. A variety of perforated trays, mesh baskets, beakers,and support racks give you the option of direct or indirect cleaning. All fivemodels come with covers to allow the cleaning bath to heat up more quickly. *Note: Perforated Trays for the 1800, 2800, and 3800 Series have perforated holes running lengthwise toward the bottom; 3 rows only. Direct Cleaning Method - Suspends parts using a perforated tray, mesh basket, or a support rack. - Permits sound waves to penetrate directly to the parts. Indirect Cleaning Method - Suspends parts using a solid tray, or beakers with a beaker cover. - Ideal for cleaning small parts. - Discarded soil cleans easily from a beaker or solid tray. - Indirect method is ideal for sample preparation. Perforated trays, solid insert trays, and wire mesh basketshave built-in handles specially designed to prevent accessories from touchingthe tank bottom. Support racks allow total volume of the tank to be used whilekeeping parts, fixtures, or containers about 1/2" above the tank bottom. Supportracks also are useful as countertop drain racks, holding parts above thecountertop surface. For 3800 Series Ultrasonic Cleaner 1.5 Gallon.

Exhaust gases are better removed from the furnace and discharged. The B500 – P580 controllers can b (more)e used to activate the fan automatically (not for models L 1/12, LE 1/11, LE 2/11).