Agilent 19091-60610 HP Capillary Column 19091-60610 HP-Retention Gap

Edwards T-Station 85H Dry Turbo Station - CF63 200-240V Ultimate Pressure <5 x 10-9 mbar Inlet Co (more)nnection DN 63 CF Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application The Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All our nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300. Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector. nEXT T-Station 85Our T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1. INCLUDED: The Edwards T-Station 85H Dry Turbo Station - CF63 200-240V includes: - Power Cord - One Year Manufacturer's Warranty

The G 7883 washer-disinfector is suitable for reusing laboratory glassware for analytical experiment (more)s in, for example, industrial, environmental and research laboratories. This appliance has a large two-tier wash area and can be built-in under a continuous worktop or used free-standing. After an intensive main cleaning phase, disinfection takes place at >90°C and a storage time of 5 minutes. The final rinse is performed with deionized water without rinsing agents. Control/programs: Multitronic Novo Plus control (certain process parameters can be changed), with 10 standard cleaning programs Program operation/display: Operation via one-button program selector, display of program cycles, display of temperature and program duration, display of program end, optical and acoustic signal, indicator lights for service and fault messages Cleaning mechanisms: Rotating: two spray arms on top and bottom of the chamber, third spray arm on top basket. Dosing devices: Valve dispensers for powdered detergent and liquid detergents. Circulation pump: 400 l/min Temperature: Freely adjustable up to 93°C Drain: 1 drain hose Drying capacity: Gravity convection drying system, 10 minutes. Can be turned on or off in any cycle Water connection: 1x hot water, 1x cold water, 1x purified water Dimensions (WxDxH): 600 x 600 x 850 mm Weight: 74 kg

This listing is for 1 of 3 Thermo Scientific Sorvall RC12BP+ Floor Centrifuge Sorvall RC 12BP Plus  (more)Centrifuge System specifications: Centrifuge Specifications Maximum speed: 4,700 rpm Maximum RCF: 7,340 xg Maximum capacity: 12 L, 6 x 2000 mL Nalgene Bio-bottles, 12-500 mL quad blood bags Drive: High-performance induction Imbalance detector: 50 gram tolerance Accel/decel profiles: 11 Run time: 1 min. - 99 min 59 sec., continuous operation Temperature control range: -10 to +40 °C Dimensions (H x W x D): 1178 x 800 x 905 mm (46.3 x 31.5 x 35.6 in) Weight 470 kg (1,036 lbs) Control: Microprocessor Programmability: 15 programs Functions: Centri-Log traceability software, ACE, Step-mode runs, slow start/stop Safety features:  Automatic lid lock, imbalance detection, armored guard ring, security key switch

Benchmark MC-24R Refrigerated High Speed Microcentrifuge without Rotor Speed Range 200 to 13,500 RPM (more) Max. Capacity 8 x 5ml Temperature -20°C to +40°C Features - The next generation touch control panel is user-friendly even with gloves - High-speed centrifugation reaches up to 13,500 RPM and 16,800 xg - Real-time RPM and RCF conversion ensures accuracy - Program storage allows saving up to 99 programs - Unique status indicator light shows the running, standby, or completed status - Compact design with a powerful motor drive reaches speeds up to 13,500 RPM - Refrigeration cools down to 4°C in less than 10 minutes - Quiet operation even at full speed Benchmark’s flagship MC-24R refrigerated microcentrifuge features a next-generation touch control panel, high-speed centrifugation (up to 13,500 rpm / 16,800 xg), and compatibility with the unique COMBI-Rotor™ (sold separately), which accepts both standard microtubes (1.5/2.0 ml) and PCR tubes/strips (0.2 ml), eliminating the need for a dedicated PCR strip/tube rotor. These features make it an ideal choice for any molecular biology laboratory. The MC-24R offers an optional hermetically sealed rotor and a four-place PCR strip rotor. It also includes adjustable acceleration/deceleration rates, real-time rpm and rcf conversion, program storage for up to 99 runs, and a status indicator light, which informs the user if the unit is running, in standby, or has completed a run. Compact and convenient, the MC-24R is perfectly suited to be the workhorse of any lab. INCLUDED: The Benchmark MC-24R Refrigerated High Speed Microcentrifuge without Rotor includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo DYNEO DD-BC26 Heating Circulator with Digital Output, 115V/50-60Hz Working Temperature Range  (more) 20°C to 200°C Heating Capacity 1000W Fluid Type Water, Silicone Features - Suitable for internal and external applications - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - High-quality thermal insulation of the bath tank The DYNEO™ heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank for temperatures to 200°C. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. Systems include insulated stainless-steel tanks with an integrated drain valve. Features a color TFT display with central rotary knob controller, multi-lingual interface, integrated programmer, Pt100 port for external temperature control. USB connection for external PC control and data-logging; Digital option includes RS232 port; analog option includes analog interface for voltage or current control. PID temperature control provides ± 0.01°C stability. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo DYNEO DD-BC26 Heating Circulator with Digital Output, 115V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The HORIZON system from Halo Labs employs Backgrounded Membrane Imaging (BMI) technology to measure  (more)and characterize subvisible particles in a high-throughput, low volume format. BMI has its roots in membrane microscopy – a USP lot release method that images particles on a membrane surface. The fully automated, fluidics-free HORIZON system utilizes disposable membrane plates and automated image processing to rapidly generate reliable and accurate particle counts and sizing. It can perform particle characterization in up to 96 samples in a single run using as little as 25 µL per sample. BMI is also insensitive to solution refractive index, enabling reliable measurement of translucent protein aggregates. The HORIZON system uses sophisticated imageprocessing techniques to analyze images and acquire particle data. The key is to first take a background image of the membrane. After samples are filtered through by vacuum and the particles are captured, the same membrane is re-imaged with sample particles on the surface. The sample image is precisely aligned with the background image and then processed pixel by pixel so that the background texture is eliminated, and particles are viewed in high contrast. Backgrounding the image leads to high reproducibility and minimal interference from membrane texture and imperfections.

Recirculation air volume: 725 m3/h Exhaust air volume: 284 m3/h Total air volume: 1009 m3/h In flow: (more) 0.45 m/s Standard lighting : 2x 36 W Exhaust duct: ø 200 mm Internal dimensions (WxDxH): 885 x 600 x 655 mm Dimensions (WxDxH): 975 x 790 x 2180 mm Weight: 180 kg