Dionex UVD 170S UV/VIS Detector P/N - 5068.0000 Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

FURTHER DETAILS TO FOLLOW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Applied Biosystems/MDS SCIEX Pro ID Software This was removed from a university lab where it was sur (more)plus to requirements. It has not been tested. The item is in good cosmetic condition. There are scratches on the jewel case and signs of age on the booklet, however, there are no marks on the back of the disc.

Applied Biosystems MDS SCIEX QStar System Software This was removed from a university lab where it w (more)as surplus to requirements. Included are the following: 1x Analyst® QS 1.1 SoftwareP/N 1012847 1x Metabolite ID 1.3 for Analyst® QS 1.1 SoftwareP/N 1012866 1x Analyst QS 1.1 Software Validation CertificateDated 03/12/20041x Metabolite ID 1.3 for Analyst® QS 1.1 Validation CertificateDated 03/12/2004. 2x Copies of License Agreement for Analyst® QS 1.1 Software1x Metabolite ID 1.3 for Analyst® QS 1.1 Software Release Notes

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)when we tried to connect it to a PC with software we had some issues. (Software not included). We installed software on a test PC and it did seem to connect to the RG3000, but it is stating that there is a Fatal Hardware Malfunction. The machine can't be used until the distributor has service it. After starting it again we got another error: Thermistor is Open. We have removed the casing to check inside the unit and cannot find any obvious issues. There is an LCD panel inside that is showing 'TEMP OVER 140/127.5/2.1/152.0'. This displays as soon as the unit is switched on, so it looks like there is some sort of temperature error happening. There are 4 x PTC EPCOS C810 Thermistors in the power supply section of the unit. It's possible that there is a fault with at least one of those. It is in otherwise reasonable cosmetic condition with marks from use, but is sold for spares/repairs The item holds up to 72 x 0.1ml strip tubes.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

KNF LABOPORT N 820 G Diaphragm Pump Ultimate Vacuum 6 mbar Maximum Flow Rate 20L/min (1.2 m3/h) Pro (more)tection Class IP30 Features - 100% oil-free transfer – thereby pure transferring, evacuation and compression of gases - High level of vapor and condensate compatibility - Ideal for extremely aggressive/corrosive gases and vapors - ATEX compliant according to II 2/-G IIB+H2 T3 internal atmosphere only - Integrated gas ballast valve - Separators and/or condensers can be purchased individually at any time and easily fitted, enabling users to build their own customized vacuum system - 3-color status display for in operation, stand-by, and error - Integrated rotational speed control - Environmentally friendly - Start against ultimate vacuum of the pump The KNF LABOPORT N 820 G Diaphragm Pump is an exceptional choice for laboratory applications, boasting a chemically resistant, compact design. This oil-free pump ensures pure transferring, evacuation, and compression of gases, thanks to its 100% oil-free operation. It is especially suitable for handling extremely aggressive or corrosive gases and vapors, highlighting its high vapor and condensate compatibility. The pump features manual speed control, allowing users to tailor the pump capacity to specific needs, and an integrated gas ballast valve for enhanced performance. Constructed with PTFE/TFM heads, PTFE-coated diaphragms, and FFPM valves, it ensures durability and reliability in demanding environments. Additionally, the pump is ATEX compliant for internal atmospheres, ensuring safety in hazardous conditions. It offers the flexibility to add separators and/or condensers individually, allowing users to customize their vacuum systems. The 3-color status display indicates operation, stand-by, and error modes, while the integrated rotational speed control adds to its user-friendliness. The pump's ability to start against the ultimate vacuum and its environmentally friendly design further enhance its appeal for a wide range of laboratory applications. INCLUDED: The KNF LABOPORT N 820 G Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Branson Disruptor horn 3/8 in dia. Stepped, solid Disruptor horn, 3/8″ diameter, stepped, solid, for (more) use with Branson SFX250, SFX550, S250A, S450A sonifiers, used for processing volumes of 5 – 100 mlINCLUDED: The Branson Disruptor horn 3/8 in dia. Stepped, solid includes: - Manufacturer's Documentation Request a Formal Quote