4 pcs HELLMA Halfmicro-Cuvettes OS Transmission 320-2500 nm Inside Width 4 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Eddy Jet 2 reduces costs per test, hands on time, and consumable use during counts while increasing  (more)microbiology lab’s productivity. This cutting-edge spiral plater automates, standardizes and streamlines plate inoculations with its patented cross-contamination-free technology. Microsyringes give the system unique, unmatched advantages that make it a bestseller. The user interface is very intuitive and there are no setup times. Although Eddy Jet 2 is mostly used by food, cosmetic and pharmaceutical labs, any microbiology lab can greatly benefit from its use. This instrument will generate a threefold dilution concentration gradient on a single plate, allowing labs to skip serial dilutions and most platings. Each sample is processed with a brand new sterile microsyringe, making sample handling a cross-contamination-free process. Other than bacterial counts, antimicrobial susceptibility testing (AST) and mutagenicity test applications are also available. Reproducibility: > 99% Time for a full cycle: 30 s (disposable syringes make disinfection unnecessary) Spreading modes stored: 25 spread modes (37 counting those for 150 mm Petri plates) Motion control: 3 Microcontroller-regulated stepper motors Petri plate diameters: 90 and 150 mm Minimum step volume: < 10 nl Maximum pipetted volume: 100 μl Syringe material: Polypropylene Plunger material: Polyethylene H.D. Auto checking: Programmed for 6 regions External balance connection: Serial RS232 DB9 Printer connection: Serial RS232 DB9 Barcode scanner connection: Specific connection for IUL barcode scanner Connection for updates: Ethernet/ USB pen drive Additional connections for peripherals: 2 x USB Host ports Dimensions (WxHxD): 515 x 420 x 500 mm Weight: 20 kg

57 x Units of Cryogenic Laboratory Freezer Racking These were removed from a university lab where th (more)ey were surplus to requirements. The units are all in good cosmetic condition. Most of them appear to have never been used. There are no sample drawers included. Included are; 40 x Large Racks73cm L x 14cm W x 88cm H 17 x Smaller Racks72cm L x 8cm W x 74cm H

This Thermo Scientific Revco UXF Ultra Low Temperature Freezer was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition with marks from use. 4 x Shelves - 71 x 69cm Model - Revco UXFModel no. UXF50086V63SN - 0132487401131018

Thermo Scientific Cytomat Microplate Hotel With Towers This item was removed from a university where (more) it was surplus to requirement. It powers on and is in very good cosmetic condition, we are unable to conduct further testing at our facility. Includes the following microplate towers:2 x Cytopmet P237 x Cytomet P69 Also Included:1 x data cable1 x Cytomat Configuration CD

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don&rsquo;t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what&rsquo;s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Labconco 9000621 WaterPro PS/HPLC Pistol Polishing Station, 115V, 60HzFeatures - Timed dispense for (more) unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000621 WaterPro PS/HPLC Pistol Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Boekel Scientific 1493 Concentric Ring Bath, 4 place, 115VThe Boekel Scientific 1493 Concentric Ring (more) Bath, 4 place, 115V, features adjustable water bath openings and heavy-duty 3" legs permanently attached to the body. It has removable concentric rings to suit most laboratory containers and analog temperature control with high and low power modes. The bath offers two power settings: one for rapid heat-up and another for reduced power consumption. It requires no wiring or assembly, is fabricated from stainless steel for a long service life, and comes supplied with a water level regulator and ring sets. The bath is complete and ready to use—just add water and plug in. Applications include solvent extraction, melting solids, evaporating liquids, analysis of total dissolved solids, KD concentration, drying of wastewater sludge, chemical reactions like saponification, QC departments, melting bases in crucibles, and solids testing.INCLUDED: The Boekel Scientific 1493 Concentric Ring Bath, 4 place, 115V includes: - Ring Sets - Water Level Regulator - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty