Technolux DD1-12A++ Freezer

Planer Kryo 560-16 Controlled Rate Freezer Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility as it require a liquid nitrogen supply which we do not have available.

Sanyo MDF-U5386S Ultra-Low Temperature Freezer -86 This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use. 483 litre / 17.1 cu ft volume 3 X height adjustable shelves 64cm x 54cm

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - 7” touchscreen with (more) easily accessible temperature display in the door handle - Minimal ice formation allowing for easy defrosting - NFC card/password protected door lock mechanism - USB port and SD card slot for easy export of -41°C setpoint data - Modular internal equipment - Easy access to lower drawers - High quality stainless steel and other materials for durability Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Intelligent automatic defrost technology that allows for a stable temperature during the defrost cycle - Automatic shutdown of the evaporator fans each time the door is opened to reduce heat transmission - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Insulated interior doors, sealed gaskets, improved frame to minimize cold air loss and heat conduction - Frost prevention which reduces the pressure on the compressor - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical sheet in Italian or in English for all the details.

Liebherr GN3023 freezer. Selectable temperature from -15 to -32 ºC. Freezing 20 kg in 24h. Net capac (more)ity 267 L. Eight transparent drawers. FrostSafe, SuperFrost. Open door alarm. Noise level 42 dB. Consumption class A+. Dimensions (width*depth*height): 600*630*1841 mm. User manual. The Liebherr GN 3023 freezer allows you to optimally store a large number of samples in the long term with low consumption.

Refrigerator capacity: 142 l Freezer capacity: 54 l Dimensions (H x W x D): 1360 x 550 x 629 mm

Dimensions (HxWxD): 1841 x 660 x 683 mm Internal dimensions drawer HxWxD): 190 x 465 x 400 mm Capaci (more)ty: 305 L

Zeiss Axio Vert.A1 FL Inverted Microscope This system was removed from a university lab where it was (more) surplus to requirements. The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted. The instrument is configured as follows: - 1 x Microscope stand Axio Vert.A1 FL (431030-9010-000) - Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination - Reflector modules: DAPI, FITC, TRITC, empty - 1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000) - Position 1: empty - Position 2: 424228-9060 0.05T Neutral density filter 0.05 - Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55 - Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55 - Position 5: empty - 1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000) - 1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000) - 1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23 - 1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000) - 1 x Camera adapter 60N-C 2/3" 0.5x (426112) - 1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00) - 1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000) - Object guide M, 130x85mm, for Axio Vert (432333-9040-000) - 1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).

SCILOGEX SCI-1524R High Speed Refrigerated Micro-Centrifuge with 24 place rotorThe SCI-1524R Refrige (more)rated Micro-Centrifuge is a compact and powerful high-speed centrifuge used in physical and chemistry analysis, biochemistry, cellular and molecular biology, clinical Labs and blood donation centers, and is ideal for high-end research applications. - Sedimentation of cells and viruses - Separation of sub-cellular organelles - Isolation of macromolecules such as DNA, RNA, proteins or lipids Click Here to View Product Video INCLUDED: The SCILOGEX SCI-1524R High Speed Refrigerated Micro-Centrifuge with 24 place rotor includes: - Power Cord - One Year Manufacturer's Warranty

IKA Matrix Delta Plus Thermoshaker Heating Temperature Max 110 °C Temperature Setting Range Min -1 (more)0 °C Temperature Stability 0.5 °C Features - Large and clear display with a convenient menu structure allows for an intuitive operation - Reduced waiting time through fast heating and cooling rates of up to 5.5 °C/min (heating) or 2 °C/min (cooling, at set-point temperature between ambient temperature and 30 °C below ambient temperature) - Firm quick-release fastener for quick and easy changing of the inserts/attachments as well as an automatic attachment detection - Automatic performance of heating and cooling tasks through programmable ramps - Aluminum die cast housing ensures secure positioning, excellent stability and everyday robustness Matrix Delta plus heats and cools reliably with variableinserts. Whether blood samples, pharmaceutical agents, DNA/RNA samples or ELISAassays - reaction vials and plates with even the smallest volumes are reliablytempered in all laboratory applications. In addition, Matrix Delta plus comes with numerous user-friendly features:- Tempering of samples - Synthesis of cDNA - Enzyme-catalysed linking of RNA or DNA (ligation) - Gentle thawing of sample material - Structural change of DNA, RNA and proteins (denaturation) - ELISA assays Click Here to View Product Video INCLUDED: The IKA Matrix Delta Plus Thermoshaker includes: - MATRIX Delta Plus - IKA Pette vario 100-1000 µl - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Matrix Delta Plus Thermoshaker Specifications Maximum load0.3 kgPermissible ON time100 %TimeryesTimer displayTFTTime setting min.1 sTime setting max.6000 minOperating modetimer, continuous and program operationWorking with microtiter platesyesWorking temperature min.room temp. -30 °CTemperature setting range min.-10 °CHeating temperature max. 110 °CHeat output 100 WHeat control TFTSet temperature resolution1 ±°CTemperature control accuracy0.5 ±°CTemperature stability0.5 °CTemperature homogenity0.5 ±°CHeating rate5.5 °C/minTemperature displayyesCooling Rate2 °C/minCooling Power72 Wembedded cooling unityesNumber of exchangable attachments10Fixed safety circuit145 °CDimensions (W x H x D)216 x 127 x 351 mmWeight9.5 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesUSB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input230 WFuse2x T4A 250VComparison of ModelsSpecificationsMatrix Delta PlusMatrix Orbital Delta F0.5Matrix Orbital Delta F1.5Matrix Orbital Delta F2.0Matrix Orbital Delta FPMatrix OrbitalMatrix Orbital PlusShaking Stroke3 mm3 mm3 mm3 mm3 mm3 mm3 mmMaximum Load0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kgSpeed Range0 - 3000 rpm300 - 2000 rpm300 - 1500 rpm300 - 1500 rpm300 - 2000 rpm300 - 3000 rpm300 - 3000 rpmSpeed Control10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM StepsTime Setting Min.1 s1 s1 s1 s1 s1 s1 sTime Setting Max.6000 min6000 min6000 min6000 min6000 min6000 min6000 minHeating Temperature Range-10 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C--Heating Rate5.5 °C/min15 °C/min11 °C/min13 °C/min18 °C/min--Dimensions (W x H x D)216x127x351 mm216x149x351 mm216x158x351 mm216x158x351 mm216x147x351 mm200x120x320 mm216x127x351 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Eppendorf 20x5.5-12ml Adapters for S-4-104, Cat # 5825736001 New in box Eppendorf 20 x 5.5-12ml adap (more)ters (Cat. # 5825736001) for 20 x 5.5 to 12mL tube capacity for the Eppendorf S-4-104 rotor in Eppendorf 5810/5810R centrifuges. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 20x5.5-12ml Adapters for S-4-104, Cat # 5825736001 includes: - Full 6 Month Parts and Labor Warranty