Liebherr CUN3033 Refrigerator with Freezer

Temperature range: -5°C to -25°C Content: 125 L Dimensions (WxDxH): 595 x 640 x 830 mm Weight: 43 kg (more) Explosion proof Possible options can be ordered at extra cost (see image)

Outside dimensions (h x w x d): 2000mm x x765mm x 800mm Inside dimensions (h x w x d): 1445mm x 620m (more)m x 670mm Capasity: 599 L Weight: 140kg 230V / 50Hz / 600W

Temperature settings: -18°C/-20°C/-22°C/-24°C/-26°C Dimensions (HxWxD): 1850 x 600 x 650 mm Internal (more) dimensions (HxWxD): 1580 x 450 x 360 mm Capacity: 282 L

New Brunswick Scientific U410-45 Ultra Low Temperature Freezer Lab This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. it is in good cosmetic condition with minor marks 4 Shelves - 57 x 55cm

Corepoint Scientific NSWDUF211JWJ-0 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 1 (more)15V Temperature Setpoint Range -50°C to -86°C Capacity 21 cu. ft. Defrost Method Manual Features - Five insulated inner doors - Microprocessor controller specifications - Touch pad keys and four line display for easy programming - Large LED temperature readout - Audible and visual alarms with silence key for audible alarms - Programmable high and low temperature alarm set points - Programmable access code to limit access to set points and controller configuration - Automatic voltage boost to compensate for low line voltages - Normally open, normally closed alarm contacts and 4-20mA signal available to connect to central alarm system - RS-232 serial output - Battery backup on electronics during power outages The Corepoint Scientific NSWDUF211JWJ-0 -50°C to -86°C Upright Ultra Low Temperature Laboratory Freezer, 115V, is engineered for demanding cold storage applications, providing safe storage for samples and reagents. This 21 cu. ft. capacity freezer features high efficiency and low noise operation, utilizing two compressors with a 300 BTUh reserve capacity. The interior is equipped with a triple gasket seal, vacuum relief port, five double-walled insulated inner doors, and four heavy-duty stainless steel adjustable shelves. The microprocessor controller offers touch pad keys, a large LED temperature readout, and both audible and visual alarms with a silence key. Programmable high and low temperature alarm set points and an access code limit access to set points and controller configuration. Additional features include automatic voltage boost for low line voltages, alarm contacts, a 4-20mA signal for central alarm system connection, RS-232 serial output, and battery backup during power outages. The temperature range is -50°C to -86°C. The exterior includes a cam action handle with a key lock and door switch for alarms, four heavy-duty swivel casters with locks, and CFC-free refrigerant. Made in the USA, this freezer is ideal for laboratories requiring ultra-low temperature storage. INCLUDED: The Corepoint Scientific NSWDUF211JWJ-0 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 115V includes: - Key for Door Lock - 4 x Adjustable Shelves - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Corepoint Scientific FF141WWW-0MHC -15C to -25C Flammable Material Storage Freezer Temperature Setpo (more)int Range -15°C to -25°C Capacity 14 cu. ft. Defrost Method Manual Features - Microprocessor temperature controller - Digital temperature display with sample simulated probe - Magnetic door gasket for positive seal - High density urethane foam cabinet and door insulation - One solid swing door, right hinged The Corepoint Scientific FF141WWW-0MHC Flammable Material Storage Freezer is designed to securely store flammable and combustible materials in laboratory settings that do not require classification for explosive conditions. This unit, adhering to NFPA 45 and NFPA 30 standards, offers a 14 cu. ft. capacity and features a durable powder-coated steel exterior with high-density urethane foam insulation to maintain consistent temperatures ranging from -15°C to -25°C.Equipped with a solid, right-hinged door that seals tightly thanks to a magnetic gasket, and a recessed handle, this freezer ensures a secure closure while maintaining easy access. It includes six fixed shelves that provide ample space for organized storage. The freezer's mobility is enhanced by leveling legs that ensure stability on various surfaces, crucial for maintaining operational efficacy and safety. INCLUDED: The Corepoint Scientific FF141WWW-0MHC -15C to -25C Flammable Material Storage Freezer includes: - Key for Door Lock - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Resolution: 1392 x 1040 pixels Exposure time: 0.001 – 10 sec Image sensor cooling: No Bit depth: 16  (more)bits Electronic optical zoom: 6x Electronic iris control: Yes Electronic focus control: No Image position system: Yes Emission filter position: 5 Transilluminator size: 210 x 260 mm White light top illumination: Yes Automatic door lock: No Contrast control: Yes Brightness control: Yes Flat fielding: Yes Saturation indication: Yes Image addition: 1 – 25x Addition interval: 0 – 20 min Dimensions (WxHxD): 520 x 452 x 487 mm Weight: 42 kg Including software No UV unit equipped

PreSens Shake Flask Reader Model: SFR V2 This was removed from a university lab where it was surplu (more)s to requirements. The unit has not been tested but is in good cosmetic condition with minor marks.

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.