Labconco 7949020 FreeZone Benchtop Shell Freezer, 115V, 60Hz

Sanyo VIP Series MDF-U33V Ultra Low Temperature Freezer This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition.

This Sanyo MDF-593 Ultra Low Temperature Chest Freezer ULT 487 Litres was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It was in use right until we collected it. It is in good cosmetic condition with marks from use. Capacity 487 litersMinimum temperature -93˚CInner dimensions 128 x 49 x 75cm (w x d x h)16 x racks 13.5 x 13.5 x 75cm with 3 shelves and 9 sets of support brackets9 x racks 14.5 x 14.5 x 55cm with 7 sets of support brackets

LEICA EM-PACT 1 High Pressure Freezer w/ EM-AFS Low Temperature Embedding System This was removed fr (more)om a university lab where it was surplus to requirements. The system powers up but we were unable to test it properly without access to liquid nitrogen. The lab did confirm it was in working order when last used. It is in good cosmetic condition with minor marks. Included are; LEICA EM-PACT 1 High Pressure FreezerType: 706802Serial#: 519799 LEICA EM-AFS Low Temperature Embedding SystemType: 702701Serial#: 518928 LEICA EM-UVType: 702727Serial#: 519711 JDC- 10 10 litre Dewar vesselSerial#: 00958 Also included is the following: 2 x Application of the Leica EM PACT2 and EM RTS Disc LEICA EM AFS Operating Manual LEICA EM PACT Operating Manual LEICA EM PACT Application Brochure 5 x Service kit with various replacement parts

Thermo Fisher TDE60086FV Ultra Low Temperature Freezer Lab This item was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in great cosmetic condition.

Corepoint Scientific NSPF171WWW-0MHC -15C to -25C Single Swing Solid Door Freezer Temperature Setpoi (more)nt Range -15°C to -25°C Capacity 17 Cu. Ft. Defrost Method Manual Features - Maintains temperatures between -15°C to -25°C (5°F to -13°F) for optimal sample preservation. - Features a digital temperature display that can switch between °C and °F, ensuring accurate temperature monitoring. - White powder-coated steel exterior with high-density urethane foam insulation for superior thermal efficiency. - Equipped with a solid, right-hinged door featuring a magnetic door gasket for a positive seal. - Keyed door lock to secure contents and prevent unauthorized access. - Standard digital temperature display with two probes for accurate temperature readings inside the unit. - High and low temperature alarms alert staff to potential issues before they affect stored contents. The Corepoint Scientific NSPF171WWW-0MHC Freezer provides 17 cubic feet of specialized cold storage, perfect for scientific and industrial settings requiring consistent low-temperature conditions. It operates effectively between -15°C to -25°C (5°F to -13°F), thanks to a precise microprocessor temperature controller with an easy-to-read digital display that can toggle between °C and °F. This unit features a solid, right-hinged door with a magnetic gasket to ensure a tight seal and is secured with a recessed handle and keyed door lock for restricted access. With its six fixed shelves, managing various materials efficiently is straightforward, and the manual defrost system keeps the freezer running optimally. Enhanced safety and operation are provided by audible and visual alarms, which alert to any temperature discrepancies. Constructed with EPA compliant high-density urethane foam and coated in durable white powder steel, this freezer is not only robust but also eco-friendly with its use of R290 refrigerant. The design includes leveling legs for easy installation and stable operation, making the Corepoint Scientific NSPF171WWW-0MHC an excellent choice for any lab needing reliable and secure freezing capabilities. INCLUDED: The Corepoint Scientific NSPF171WWW-0MHC -15C to -25C Single Swing Solid Door Freezer includes: - 6 Fixed Shelves - Leveling Legs - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Corepoint Scientific FF171WWW-0MHCTS -15C to -25C Flammable Material Storage Freezer Temperature Set (more)point Range -15°C to -25°C Capacity 17 cu. ft. Defrost Method Manual Features - EPA compliant high density urethane foam insulation - Magnetic door gasket for positive seal - Keyed door lock - Microprocessor temperature controller with digital temperature display - Touch screen digital temperature display with user friendly interface - Active temperature scale bar display - Digital 24-hour temperature chart The Corepoint Scientific FF171WWW-0MHCTS is a specialized Flammable Material Storage Freezer designed to safely store flammable and combustible materials, meeting NFPA 45 and NFPA 30 standards for use in unclassified laboratory locations. This freezer offers a 17 cu. ft. storage capacity within a robust powder coat steel exterior and features high-density urethane foam insulation for optimal thermal stability. Key elements of this freezer include a solid, right-hinged door with a magnetic seal for a secure closure, complemented by seven inner doors which enhance the organization and accessibility of stored materials. The unit is equipped with a microprocessor temperature controller that provides a digital temperature display, adjustable from -15°C to -25°C, and includes a user-friendly touch screen interface. Safety and monitoring enhancements include multiple alarms such as audible and visual high/low temperature alerts, door ajar and power failure alarms, all designed to maintain critical conditions without compromise. INCLUDED: The Corepoint Scientific FF171WWW-0MHCTS -15C to -25C Flammable Material Storage Freezer includes: - Key for Door Lock - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Heidolph Outlet instrument*. 12 months warranty. *Heidolph Outlet instrument can be overstocked item (more), returns, demo instrument etc. They are checked by Heidolph and in a 100% functional condition. Profit from great savings thanks to slight optical defects. Complete set with Heidolph glassware set G3 scope of delivery: - Hei-VAP Core ML G3, Rotary Evaporator with motor lift and vertical glassware set G3 - Hei-VAC Control, Vacuum controller complete with integrated ceramic vacuum sensor, regulation valve and venting valve. With wall-plug power supply - Vacuum pump Rotavac Valve Tec - Chiller Hei-CHILL 350 (instead of Hei-CHILL 250) LP 3.132,00 - Tubing set - Thermal fluid - Kryo 30

Pipette tips 5 mL GILSON D5000 Diamond Tips TIPACK, rack of 50 pieces. You can also easily order PIP (more)ETTES and/or PIPE HOLDERS  . Volume: 500 – 5000 µL Rack of 50 pieces Color code: Purple Length: 104 mm High quality PP Non-Sterile

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Ohaus EX224/AD Explorer Analytical Balance Introducing the OHAUS EX224/AD Explorer Balance: high-per (more)formance laboratory equipment that redefines the standard for analytical balances. This top-tier balance is part of the OHAUS Explorer Series, a unique line that seamlessly combines modern features with an intelligent design, promising to simplify even the most complex laboratory measurements.The EX224/AD Explorer Balance stands out with its large color touchscreen, providing intuitive navigation and convenient access to the system's advanced application modes. It has an icon-driven application software that includes features such as user management, a comprehensive library, and a minimum weight indication. These smart features make the balance not just a tool but a helpful assistant in your laboratory work.The Explorer Balance prioritizes accuracy with its fast stabilization times, optimized linearity, and excellent repeatability specifications. It includes enhanced vibration filtering, which guarantees precise results under different working conditions. Another standout feature is the AutoCal™ calibration system, ensuring the accuracy of your measurements is maintained over time and across a wide range of environmental conditions.The EX224/AD model incorporates an ingenious draftshield that offers easy entry to the weighing chamber. This draftshield can be accessed through a flip or sliding top door and the top-mounted side doors. Notably, these doors can be automatically controlled in /AD models, offering additional convenience and efficiency to your weighing process.Discover the future of laboratory measurements with the OHAUS EX224/AD Explorer Balance, a high-performance balance that offers unmatched functionality, ensuring precise and reliable results every time.INCLUDED: The Ohaus EX224/AD Explorer Analytical Balance includes: - Power Cord - One Year Manufacturer's Warranty