Galileo GAHW-50

This listing is for a Labcold RVPF0734 Plasma Freezer. The unit is in full working condition and is (more) ready for immidate realese. Ensure the highest standards of blood plasma storage with the Labcold RVPF0734 Plasma Freezer, a state-of-the-art laboratory-grade solution designed for optimal performance and safety. This floor-standing freezer combines advanced technology with a space-saving design, making it an ideal choice for healthcare facilities and research laboratories. Key Features: Optimal Temperature Control: Achieve a consistent temperature range of -34°C, essential for preserving plasma quality and integrity. Faster Thawing Times: Designed to minimize thawing durations, reducing the risk of bag cracking and ensuring safe handling of sensitive materials. Convenient Storage: Equipped with front-opening doors and multiple storage drawers, allowing for easy access and organization of plasma bags. Digital Alarm and Display: Stay informed with real-time monitoring through a digital display and alarm system, ensuring immediate alerts for any temperature fluctuations. Chart Recorder: Track temperature changes over time for compliance and quality assurance. Benefits: The Labcold RVPF0734 is registered as a medical device in accordance with EU Directive 93/42/EEC and compliant with BS4376: Part 2:1996, ensuring reliability and safety in plasma storage. Its spark-free interior and lockable doors provide secure access and protection against flammable materials. Technical Specifications: Temperature Range: -34°C (tested to reach -36/-37°C) Safety Features: Spark-free interior, lockable doors Monitoring: Digital thermometer included for precise temperature tracking

57 x Units of Cryogenic Laboratory Freezer Racking These were removed from a university lab where th (more)ey were surplus to requirements. The units are all in good cosmetic condition. Most of them appear to have never been used. There are no sample drawers included. Included are; 40 x Large Racks73cm L x 14cm W x 88cm H 17 x Smaller Racks72cm L x 8cm W x 74cm H

New Brunswick Scientific Innova U725-G Ultra Low-Temperature Freezer Lab This item was removed from  (more)a university where it was surplus to requirement. It is in good cosmetic condition and powers on; however, upon activation, the pump experiences a short circuit, which prevents further testing. Therefore, this item is listed as Spares/Repair. It features 2 x Shelves: 55 x 84cm

Sanyo MDF-U5386S Ultra Low Temperature Freezer ULT It is in good cosmetic condition and powers on, w (more)e are unable to test it further at our facility. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally.

Thermo Fisher Scientific TSX2320FV Laboratory Freezer Lab This item was removed from a university la (more)b where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in great cosmetic condition. Key included.

New Brunswick Scientific C760 Innova Ultra Low Freezer Chest Freezer This item was removed from a un (more)iversity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally. Included with the freezer are various rack units: 18 x 13 compartment rack 14 x 14 x 76cm 14 x 9 compartment rack 18 x 12 x 63cm 2 x 10 compartment rack 16 x 16 x 64cm 2 x 10 compartment rack 15 x 16 x 67cm 2 x 10 compartment rack 14 x 14 x 59cm 2 x 9 tray rack 14 x 14 x 50cm

This Varian VK 8000 Dissolution Sampling Station was removed from a university lab where it was surp (more)lus to requirements. This item is in good cosmetic condition and powered up, we are unable to test it further at our facility. The VK 7010 has the capacity to hold 8 vessels of 1 litre capacity and 8 stirring drive shafts but this unit is Missing its stirrers and vessels No paddles or spindles are fitted to the chucks on the drive shafts

Precision Balance WTC Fast and accurate mass determination both in the lab and in the factory. Energ (more)y-efficient electronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power No access to mains power? Power failure? No problem. The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Anything else? Plenty! Printer, computer, USB flash drive, additional display – the WTC balance can work with them through communication interfaces. In addition, a real-time clock and ALIBI memory. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a balance. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Gilson Pipetman L P100L 10 - 100 uL, Metal Ejector Pipette Designed for performance and comfort, PIP (more)ETMAN® L comesin a comprehensive range of models adapted to your needs in the lab. Comfortable, precise, accurate, and reliable, use PIPETMAN L pipettesconfidently in your applications. Available as a fixed or variable volume, the PIPETMAN Lair-displacement pipettes cover a full volume range, including: - Variable volume single channel models covering a volumerange from 0.2 μL to 10 mL - Variable volume multichannel models covering a volumerange from 0.5 μL to 1200 μL, including four models equipped with V-rings (VR)at the bottom of the tip holder for a proper fit with most tip brands, coveringa volume range from 20 µL to 300 µL - Fixed volume single channel models covering a volumerange from 1 μL to 5000 μL Convenient UseLightweight and balanced, PIPETMAN L combines anergonomic design with minimized pipetting forces, giving you the ability topipette longer without fatigue. Right-handed or left-handed? No problem. Adjust thelocation of the tip ejector to the most comfortable position for you. Secure PipettingReduce pipetting errors and avoid accidental volumechanges during pipetting cycles with a true volume-locking mechanism forimproved accuracy and precision. PIPETMAN L variable volume models are all fullyautoclavable without disassembly for maximum convenience and protection fromcross-contamination. Large volume models are equipped with a plastic tipejector to avoid direct contact with the tip and better compatibility withchemicals. Choose Your Tip EjectorFor single channel models, choose between a model with astainless-steel tip ejector or a plastic ejector, depending on your needs andapplications. GLP CompliancePIPETMAN L models feature a DataMatrix 2D code for easytraceability. Use a 2D code scanner to transfer the code automatically into anytraceability or asset management system. Also, the pipette serial number isengraved on the body of the pipette for unique identification. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman L P100L 10 - 100 uL, Metal Ejector Pipette includes: - Operator's Guide - 3 Year Manufacturer Warranty Gilson Pipetman L P100L 10 - 100 uL, Metal Ejector Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementVolume Range1 - 100 µLPipette ModelP100LPipette RangePIPETMAN LNumber of Channels1Ejector TypeMetalPack Size1Pack Size UnitEachComparison of ModelsSpecificationsP2L (0.2 - 2 µL)P10L (1 - 10 µL)P20L (2 - 20 µL)P100L (10 - 100 µL)P200L (20 - 200 µL)P1000L (100 - 1000 µL)P5000L (500 - 5000 µL)P10 mL (1 - 10 mL)Adjustable or Fixed VolumeAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustablePipette TypeManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementVolume Range0.2 - 2 µL1 - 10 µL2 - 20 µL10 - 100 µL20 - 200 µL100 - 1000 µL500 - 5000 µL1 - 10 mLNumber of Channels11111111.comparison-table tr td:nth-child(5) { background-color: #fffacd; }Request a Formal Quote

Gilson MINIPULS 3 Peristaltic Pump Head, R4 Four Channel The Gilson MINIPULS 3 Peristaltic Pump Head (more), R4 Four Channel is a versatile pump head with a maximum flow rate of 40 ml/min and a minimum flow rate of 0.3 ul/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R4 Four Channel includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty