Yamato RE-202 Rotary Evaporator with Waterbath and Glassware, 115V

evaporators, rotary evaporators

Yamato RE-202-A Rotary Evaporator with Water Bath and Selectable Glassware, 115V

Yamato RE-202-A Rotary Evaporator with Water Bath and Selectable Glassware, 115V Speed Range 5 to 3 (more)15 RPM Evaporation Capacity Up to 23 ml/min Rotation Modes Forward/Reverse/Auto Inversion Features - Rotate faster & slower (315 RPM – 5 RPM) than any other rotary evaporator on the market to test new SOPs and develop better methods - Unit is easy to disassemble and clean after use - Program rotation direction changes, ramps, and other automations to get more done in the lab at once - Automatic on/off and suction speed adjustment via wireless vacuum controller - Easily analyze the residue left over after distillation - Orient for left or right-handed operation based on your limited bench space Standard rotary evaporator designed with a slide jack mechanism for convenient height adjustment. Set includes the BM302-A Water Bath and your choice of glassware. Market leader in rotation speed range at 5 to 315 RPM. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato RE-202-A Rotary Evaporator with Water Bath and Selectable Glassware, 115V includes: - Glassware Set Selected Above - BM302-A Water Bath - Rotary Joint - 1L Evaporation Flask - 1L Receiving Flask - Ball Joint Clamp - Flask Clip - Vacuum Seal - Condenser Insulation Kit - Condenser Bracket (Only for Glassware Sets B & C) - Hex Wrench - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

$2,387.00 ex VAT

baths or circulators, rotary evaporators, evaporators

Yamato RE-202-A Rotary Evaporator (Main Unit Only), 115V

Yamato RE-202-A Rotary Evaporator (Main Unit Only), 115V Speed Range 5~315 rpm Evaporation Capacity (more) Up to 23 ml/min Operating Ambient Temp. Range 5~35°C Features - Rotate faster & slower (315 rpms – 5 rpms) than any other rotary evaporator on the market, so you can test new SOPs and develop better methods. - Easily manage your expensive samples with small flask sizes (from 100ml to 2L). - Program rotation direction changes, ramps, and other automations to get more done in the lab at once. - Easily analyze the residue left over after distillation. - Orient for left or right-handed operation based on your limited bench space. Standard rotary evaporator with slide jack mechanism for convenient height adjustment. Market leader in rotation speed range at 5~315 rpm. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato RE-202-A Rotary Evaporator (Main Unit Only), 115V includes: - AC adapter - Bath Guide - Rear Cover - Single-Sided Tape Fastener Roll - Double-Sided Tape Fastener Roll - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

$1,348.00 ex VAT

rotary evaporators, evaporators

IKA RV 3 Rotary Evaporator w/ Coated Dry Ice Condenser

IKA RV 3 Rotary Evaporator w/ Coated Dry Ice Condenser Features - Locking mechanism: red indicator s (more)hows unlocked position of vapor tube - Adjustable immersion angle - Stepless speed setting with dial control and analog speed display - Speed range of 20 to 300 RPM - Low device voltage (24V) ensures user safety - Compatible with the entire range of IKA RV 10 glassware 4L heating bath for temperatures up to 99°C with a digital temperature display and carrying handles Integrated push-off mechanism to loosen tightly fitting or stuck glassware for easy flask exchange Mechanical lift for precise positioning of the glassware, suitable for left or right handed operators and equipped with an end-point safety stop The RV 3 Rotary Evaporator is the manual basic model in thefamily of IKA Rotation Evaporators. It finds a multitude of uses in thechemical, pharmaceutical, and biotechnology industries, in research anddevelopment, in manufacturing and quality assurance, in laboratories, and inplant construction. Digital displays for speed and heating bath temperatureenable optimum control of all distillation processes. INCLUDED The IKA RV 3 Rotary Evaporator w/ Coated Dry Ice Condenser includes: - RV 3 ECO - HB eco S099 Heating Bath - RV 10.4 Dry Ice Condenser Coated Glassware - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 3 Rotary Evaporator w/ Coated Dry Ice Condenser Specifications Type of cooling verticalCooling surface 1500 cm2Motor principle DCSpeed range20 - 300 rpmSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftmanualStroke150 mmHeating temperature rangeroom temp. - 99 °CDimensions (W x H x D)440 x 530 x 330 mmWeight28.3 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20Voltage100 - 240 VFrequency50/60 HzPower input1400 WComparison of ModelsSpecificationIKA RV 10 Digital Rotary Evaporator w/ Coated Dry Ice CondenserIKA RV 3 Rotary Evaporator w/ Coated Dry Ice CondenserIKA RV 8 Rotary Evaporator w/ Coated Dry Ice CondenserCooling Surface1500 cm²1500 cm²620 cm²Speed Range5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorManualManualStroke140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CHeat Output1300 WN/A1400 WFilling Volume Max.3 L4 L4 LTimerYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmVoltage220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(3) { background-color: #fffacd; }Request a Formal Quote

$4,531.00 ex VAT

evaporators, rotary evaporators

Porvair Sciences Ultravap Mistral Nitrogen Evaporator

The Ultravap Mistral from Porvair Sciences is designed to remove the traditional laboratory ‘bottlen (more)eck’ of solvent evaporation from microplates. Fully automating the dry-down step has always been impossible because it is difficult to interface liquid handling robots with traditional centrifugal-type evaporators. The Ultravap Mistral design, by dispensing with the rotating arm of the centrifuge and offering a fully-flat front profile, overcomes this problem and is much better positioned to link with your robot. With more than 20 years experience in producing deep well microplates, Porvair Sciences has thoroughly researched the problems of drying down organic solvents in plates. The Ultravap Mistral may be operated with a supply of clean, dry compressed air in place of nitrogen, if the chemistry allows. It has been designed in close co-operation with the leading suppliers of laboratory liquid handling robots and is suitable for integration directly with the following manufacturers robots: Hamilton Robotics, Tecan, Perkin Elmer, Beckman Coulter A built in digital gas flow meter controls the flow rate and switches off the heaters if the gas supply drops below 30L per minute for maximum safety. Between 30 and 5L per minute, the Levante may be operated without heating using gas at input temperature only. Similarly, if the pressure exceeds 7 bar, safety valves will shut down the system to prevent damage. Optimal gas supply is 70L per minute at 6 bar. Equipped with a 48 straight needle head

€2,999.00 ex VAT

Porvair Ultravap Microplate Solvent Evaporator

evaporators

€499.00 ex VAT

Metronohm 701 KF Titrino Keyboard

evaporators

People are watching right now:

FURTHER DETAILS TO FOLLOW

€250.00 ex VAT

€297.50 incl. VAT if applicable

Meridian Bioscience illumipro-10 Incubator Reader Laser Diode DNA Amplification

Manufacturer: Meridian Biosciene, Inc. Model: illumipro-10™ Incubator Reader with Thermal Printer P/ (more)N: 610172 S/N: IP2010 Description: The illumipro-10™ is an automated isothermal amplification and detection system for use with Meridian Bioscience, Inc. illumigene® Loop-Mediated Amplification products.The illumipro-10™ is intended to be used by trained laboratory professional users in laboratory settings. Isothermal amplification is carried out by two independently controlled heat blocks capable of operating between 55 C and 65 C, and within 1 C of the temperature set point. The isothermal amplification temperature set point is dictated by the illumigene Assay selected. Isothermal amplification time is monitored by the illumipro-10’s internal timer. When in operation, the illumipro-10 will display ‘Test in Progress’ as well as block temperature and incubation time remaining. DNA amplification detection is completed by the illumipro-10 optics system. Each illumipro-10 block contains laser diodes illuminating at 650 ± 20 nm and corresponding detectors monitoring light transmission across each illumipro-10 well. The illumipro-10 performs an initial check of the optics system prior to run start. Observed failures in the optics system disable the instrument block until the failure can be resolved. After successful optics verification, the illumipro-10 checks for the presence of an illumigene test device in each well. The illumipro-10 automatically enters a Sample ID of ‘EMPTY WELL’ for all wells that a test device cannot be detected in. The illumipro-10 measures the absorbance of each illumigene test device at the beginning and end of the isothermal amplification incubation. Sample results are reported as INVALID, POSITIVE, or NEGATIVE based on the observed change in absorbance. Key Facts: • Optimal flexibility for stat or batch runs• True walk away capability for optimized workflow• Very low maintenance requirements enhance efficiency• Instrument verifications can be performed with in-house personnel Features: • Digital Display (guides users through process)• Automatic system self-check• Reaction Blocks (operate independently)• Barcode reader (for sample ID entry)• Small Footprint (of instrument is only 21 cm x 29.2 cm) Performance features of the illumipro-10 include the following: • Self-diagnostics are performed at power-on and at Run start• Self-diagnostic for Test Device Placement and Optics Path Verification• Lid Closure Detection and Lid Lock Feature• Thermal Heat Block with Optics Detection at each well with Visible Light Emission/Absorbance (650 ± 20 nm)• Interval Timer with Real-Time Assay Processing Time Display• Simple LCD User Interface for Instrument Set-up, Program Selection and Sample Identification Input• Barcode Scanner for Sample Identification entry• External Keyboard available for Sample Identification entry• Attached Printer for results reporting• Control of amplification product carry-over through use of the self-contained illumigene Test Device Items delivered: - Meridian Bioscience illumipro-10 Incubator Reader- Meridian Bioscience illumipro-10 Thermo Printer- Power Cord & Connection Cables- Instruction Manual The incubator reader is in absolutely like new condition and 100% functional tested.

€2,500.00 ex VAT

€2,975.00 incl. VAT if applicable

Thermo Scientific HS 1000uL 365Q2121 PAL3 Syringe 1mL RSH FN GT HS 65mm 23G

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€180.00 ex VAT

€214.20 incl. VAT if applicable

KNF UN840.1.2FTP IP44 Diaphragm Pump

KNF UN840.1.2FTP IP44 Diaphragm Pump Ultimate Vacuum 90 mbar (abs.) Maximum Flow Rate 65L/min (3.9 (more)m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free Thechemically-resistant UN840.1.2FTP diaphragm pump is a oil-free deviceused in a wide range of laboratory applications. These pumps transfer and pumpdown without contamination.The heart ofthis very compact pump is a KNF structured diaphragm. This patented diaphragmwas stress-optimized using the Finite Elements method. As a result, we wereable to make the pump smaller while increasing the service life of thediaphragm and improving performance. This pump is 115V. INCLUDED: The KNF UN840.1.2FTP IP44 Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

$2,896.00 ex VAT

pumps liquid & other

CAT RM 5 Roller Mixer

Roller mixer with 5 rollers. The synchronized rotating PVC rollers provide a uniform swaying surface (more), perfectly suited for simultaneous gentle and homogeneous mixing of cylindrical vessels with e.g. blood or other cell suspension. Speed: 38 rpm Length of rolls: 330 mm Number of rolls: 5 Tilt angle: 3° Max load: 5 kg Dimensions (WxHxD): 180 x 110 x 480 mm Weight: 3.7 kg

€449.00 ex VAT

Becton Dickinson FACS Lyse Wash Assistant

mixers, rollers

€2,499.00 ex VAT