Taylor Wharton 34HC Cryogenic Storage Dewar

Thermo Forma Model 8031 Liquid Nitrogen Dewar Tank This was removed from a university lab where it w (more)as surplus to requirements. The unit is in good cosmetic condition but has not been tested at our facility. 8 x Storage Racks - 12.5 x 8 x 48.5cm9 sections per pack - 12.5 x 7.5cm

Oxford Cryofree System This was removed from a university lab where it was surplus to requirements.  (more)The unit has not been fully tested. The system includes; 1x Oxford Intelligent Gas Handling System with Femto Power Thermometry unit:Part No. CSB1001The unit powers on. 1x Oxford Instruments Cyrofree CylinderProject No. 418726The unit is in good cosmetic condition.There are some light tape marks and some colour bleaching from general use. 1x Trivac Pump:Type D65B3 Phase 16A Plug1x/10-4The unit powers on and is in good cosmetic condition. 6 x Cylindrical Vessels:Volume and Dims of Vessels: •4.5L (H62cm x W13.5cmx L13.5cm) •5.25L (H59cm x W12.5cm x L12.5cm) •2.25L (H33.5cm x W9.25cm x L9.25cm) •2L (H34cm x W9cm x L9cm) •11.5L (H75cmx W22cm x L22cm) • 4.5L (H72cmx W13.5cm x L13.5cm) 1x Metal flex Hose: 2x Metal 3x valve sealed Cylinders:

Bruker Cryo Spray Source This was removed from a university lab where it was surplus to requirement (more)s. The unit powered up in testing but could not be tested further without liquid nitrogen. It is in good cosmetic condition with minor marks from use.

AIRTECH SMARTFLOW Class II-A2 biosafety cabinet. Working size 130x79x200 cm (LxFxW). Centrifugal tur (more)bine with adjustable speed. Flow rate upward 0.53 ± 0.025 m / s, downward 0.33 ± 0.025 m / s. 30/70 air recirculation (exhaust / recirculation). ULPA extraction and discharge filters (according to IEST-RP-CC001.3), with an efficiency of 99.999% for a particle size between 0.1 and 0.3 microns. Front window with double laminated glass. Stainless steel interior. Programmable germicidal UV and LED white light. Two interior plugs. LCD display with indicators of air flow, temperature and humidity of the work area, filter pressure, hours of UV light, hours of filter use. Eco operating mode. Incorrect air flow, filter replacement and front window height alarms. Support structure included. CE certified. Manufactured according to EN 12469; ISO 14644.1 (air quality); ISO29463 (filtration) and EN-61010-1 (electrical safety). Thanks to their highly efficient ULPA filters, AIRTECH SMARTFLOWAirtech BSC-1304 II A2 Class II-A2 biological safety cabinets are designed to protect both samples, the operator and the laboratory environment when working with potentially infectious agents. Its high qualities backed by a series of air quality certifications, filters, structure, electrical components and diversity of sizes provide the operator with the greatest comfort and safety when working. It can be used in hospitals, research centers and life science companies in general.

Benchmark H5100-2CR 24 x 1.5/2.0ml Cryovial Block for MultiTherm Touch The Benchmark H5100-2CR 24 x  (more)1.5/2.0ml Cryovial Block for MultiTherm Touch is designed for use with the Benchmark H5100-HCT MultiTherm Touch Heating and Cooling Shaker. The H5100-2CR is not compatible with the H5100-HL Heated Lid. INCLUDED: The Benchmark H5100-2CR 24 x 1.5/2.0ml Cryovial Block for MultiTherm Touch includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

COMBISTORAGE UNDERBENCH Modular and certified. Optimize the space in your laboratory thanks to the C (more)OMBISTORAGE under hoods. Replace your furniture in the laboratory with useful safety cabinets for acids, bases and flammables. Different widths and heights to perfectly fit your laboratory. COMBISTORAGE UNDERBENCH safety cabinets can be combined on bases of different lengths. (It allows to have a single base for composition: ACIDS + BASES + FLAMMABLES).  Possibility of aspiration. - Construction in electro-galvanized steel sheet with thicknesses from 1 to 1.5 mm cold bent - gray - External finish in acid-resistant epoxy resin and passage in a thermal tunnel at 200°C - Panels made of HPL (High Pressure Laminate) with high resistance to chemical and aggressive vapors - Structure that provides for replacements with spare parts - redisposition for ventilation with 100Ø mm flange for external connection or filtration ventilation system - Equipped with grounding - Adjustable feet - Key lock - Shelves made of plasticized steel or stainless steel with adjustable height - Model with chest of drawers made of plasticized steel - Securing the shelves with pegs - Signage with pictograms according to ISO 3864 - EN61010 certification - EN16121 BV certification HOW TO CHOOSE YOUR COMBISTORAGE IN 3 SIMPLE STEPS? 1 - Measure the space you have available in your laboratory: under the hood, instead of a simple piece of furniture, in a space you do not use. 2 - Think about if you will need a particular support base. 3 - Choose the cabinet model for acid chemicals, bases or for flammable products. THE VERSATILITY OF COMBISTORAGE MODELS - Left, right or drawer door - 13 widths available - Support bases at 70 mm - All models available in 620 or 720mm heights DO YOU NEED HELP? Do not hesitate to contact us, our CHEMISAFE product expert will help you choose the model that best suits your needs or design the perfect set for your laboratory. CONTACTS US ➞

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Gilson DISPENSMAN 50mLDISPENSMAN is a bottle-top dispenser for convenient, safe, and precise deliver (more)y of common laboratory solutions and solvents. Its innovative, three-position nozzle controls the dispensing of liquids, the removal of air in the system to avoid liquid loss, and includes an anti-drip safety feature that returns liquid to the bottle. Make volume changes quickly and easily with no need to open bottles, decreasing chances of contamination. Five DISPENSMAN models are available covering volume ranges from 250 µL to 50 mL.Accurate and Reproducible DispensingQuickly and easily dispense just the liquid needed with a precise volume setting. The built-in recalibration mechanism ensures reproducibility. Avoid any loss of liquid with the recycle position and recirculation valve for purging air.Safe and Easy to UseKeep your bench and other devices safe with the anti-drip system and the return of liquid into the bottle after use. The sliding volume adjuster enables simple one-hand operation and volume adjustment.Flexible • Adaptable to every type of liquid with an easy calibration • Universal chemical compatibility for many applications • Numerous bottle adaptors • Fully autoclavable at 121°CINCLUDED: The Gilson DISPENSMAN 50mL includes: - Two Year Manufacturer's Warranty

Eppendorf 4 x 15ml Adapters, Cat. # 022637606 New in box Eppendorf 4 x 15ml Adapters, Cat. # 022637 (more)606 for the A-4-44 rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 4 x 15ml Adapters, Cat. # 022637606 are designed to be used with an Eppendorf 5804/R or 5810/R Centrifuge. INCLUDED: The Eppendorf 4 x 15ml Adapters, Cat. # 022637606 includes: - Full 6 Month Parts and Labor Warranty