Epredia HM525 NX UV Cryostat (Thermo Shandon) Lab

This listing is for a Microm EC 350-2 Cryoconsole.The unit is in full working condition and is ready (more) for immediate release.The Microm EC 350-2 cryoconsole is an essential tool for laboratories focused on histology and sample preparation, particularly when working with paraffin-embedded samples. Its advanced design and functionality ensure reliable performance for optimal results.Key Features:Large Cooling Plate: The EC 350-2 is equipped with a spacious cooling plate specifically designed for the solidification and maintenance of samples in paraffin. This feature ensures that samples are uniformly cooled, which is critical for preserving sample integrity.Adjustable Temperature Range: Users can easily set the temperature between 0 and -15ºC, allowing for precise control based on specific sample requirements. This flexibility is crucial for various protocols that may necessitate different cooling conditions.Microprocessor Control: The operations of the cryoconsole are managed through a microprocessor integrated into the paraffin dispenser, ensuring accurate temperature management. This technology helps maintain consistent conditions, minimizing the risk of temperature fluctuations that could affect sample quality.Independent Operation: The EC 350-2 can operate efficiently at its maximum performance of -15ºC without requiring any adjustments. This feature makes it a dependable choice for laboratories that demand stability and reliability in their sample processing.Applications:The Microm EC 350-2 is ideal for:Histology Laboratories: Perfect for preparing tissue samples for sectioning, ensuring that paraffin solidifies correctly for optimal slicing.Research Settings: Supports various experimental protocols requiring precise temperature control during sample preparation.

This Oxford Cryosystems 600 Series Cryostream Cooler Controller was removed from a university lab wh (more)ere it was surplus to requirements. The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

This Statebourne biostor 5 Liquid Nitrogen Cryogenic Storage Tank/Dewar was removed from a universit (more)y lab where it was surplus to requirements. The unit is in good cosmetic condition but as it is a used item it will have some scrapes and marks from use. It comes with a set of 6 storage racks and a trolley. It has not been tested.

This Reichert-Jung Cryocut E  Type - 97 00 51 Cryostat Microtome was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition but has some marks from use.

MVE CryoShipper 8.5 ltr with ShipsLog 3 Temperature data logger Lab This item was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Neck Opening in (mm): 8.50 (216.0)Overall Height in (mm): 21.5 (546)Outside Diameter in (mm): 14.50 (369) Also includes the following: ShipsLog 3 Temperature data logger.

Oxford Cryofree System This was removed from a university lab where it was surplus to requirements.  (more)The unit has not been fully tested. The system includes; 1x Oxford Intelligent Gas Handling System with Femto Power Thermometry unit:Part No. CSB1001The unit powers on. 1x Oxford Instruments Cyrofree CylinderProject No. 418726The unit is in good cosmetic condition.There are some light tape marks and some colour bleaching from general use. 1x Trivac Pump:Type D65B3 Phase 16A Plug1x/10-4The unit powers on and is in good cosmetic condition. 6 x Cylindrical Vessels:Volume and Dims of Vessels: •4.5L (H62cm x W13.5cmx L13.5cm) •5.25L (H59cm x W12.5cm x L12.5cm) •2.25L (H33.5cm x W9.25cm x L9.25cm) •2L (H34cm x W9cm x L9cm) •11.5L (H75cmx W22cm x L22cm) • 4.5L (H72cmx W13.5cm x L13.5cm) 1x Metal flex Hose: 2x Metal 3x valve sealed Cylinders:

CryoBox Freezer Rack THERMO SCIENTIFIC 5038-4322 Brand new in original packaging For standard cryoge (more)nic boxes with ease with these durable stainless steel and aluminum freezer racks, which fit most standard chest freezers and upright freezers Part number: 5038-4322 For 12 standard Cryoboxes 12-place rack (4X3) Type: horizontal Dimensions: 22.5 x 44.4 x 14.3 cm (lxWxH)

The MACSQuant Analyzer 10 brings to life the versatility and power required for modern flow cytometr (more)y applications. Whether mining for rare cells, analyzing the efficiency of your cell manufacturing process or investigating signaling pathways, you are equipped for the task at hand. With a range of automated features, this flow cytometer lays the foundation for true automation present in all instruments belonging to the MACSQuant Family of flow cytometers. Laser excitation (spatially separated): 405 nm (40 mW), 488 nm (30 mW), 640 nm (20 mW) Emission detectors: FSC: 488/10 nm, SSC: 488/10 nm, V1: 450/50 nm, V2: 525/50 nm, B1: 525/50 nm, B2: 585/40 nm, B3: 655–730 nm, B4: 750 nm LP, R1: 655–730 nm, R2: 750 nm LP Fluorescence sensitivity and resolution: MESFs (CV <5%), FITC <200, PE <100, APC <150 Flow cell dimensions: 200 x 250 μm Fluorescence detectors: Optimized with spectrally matched PMTs for all channels Minimal uptake volume: 1 μL (25 μL recommended for volumetric counting applications) Sample flow rate: 25, 50, or 100 µL/min or automate flow rate to maintain 500, 1000, or 2000 events/second Measurement speed: <25 minutes per 96-well plate (5 μL measurement volume per well) Sample uptake: 1–450 µL Maximal event rate: Up to 15,000 events/second Dimensions (WxDxH): 669 x 500 x 554 mm Weight: 50 kg

This Thermo Finnigan LCQ Deca XP Plus Mass Spectrometer was removed from a university lab where it w (more)as surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The main board and mains switch have now been removed and sold. Not all the cables/connectors etc were re-connected during re-assembly. The following other parts were also removed; - Power supply,&nbsp;Serial No: 9001305 008,&nbsp;Model No: SDS400-3628-1,&nbsp;SSI P/N: 20-0049-015N - Multifan 4394,&nbsp;GB-PAT: 2133082 2075288,&nbsp;ASSY by PAPST in Hungary&nbsp; &nbsp;- Dynode&nbsp;FINNIGAN P/N: 97000-98042 REV-C &nbsp;- Aux valve&nbsp;TYPE: DEMB3628028,&nbsp;S/N: 237085000104 &nbsp;- 5kV power supply&nbsp;97000 10070C &nbsp;- Ion Gauge&nbsp; &nbsp;- LED front panel + 4 screws&nbsp;ASSY No: 97000-61400 REV-C &nbsp;- Vent Delay PCB panel&nbsp;ASSY No: 97000-61370 REV-A It also comes with;1 x LCQ Hardware Manual.2 x Vacuum hoses with breeze hose clamps.Various other front assembly parts. This is sold for spares/repairs

This Boxer 200/100 L Laboratory Autoclave was removed from a university lab where it was surplus to  (more)requirements. The client had informed us that the unit is in 100% working order and has had little use. It has now been professionally serviced and has been confirmed to be in full working order. It has passed all safety checks. Full report available on request. The internal chamber is 39cm (L)x 59cm (W)x 39cm (H). The unit is in very good condition with very few marks.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

F1 Mass Standard - knob weights with adjustment chamber - set (1 mg - 5 g), wooden box Number of pie (more)ces in the set: 16 Weights 1 g i 2 g &ndash; solid masses without adjusting chamber