Bruker Cryo Spray Source for MicrOTOF -Q ll Lab

This Oxford Cryosystems 600 Series Cryostream Cooler Controller was removed from a university lab wh (more)ere it was surplus to requirements. The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

This Leica CM 1850 UV Cryostat Model - CM1850UV-1-1 was removed from a university lab where it  (more)was surplus to requirements. The unit became misaligned when a side panel acting as a support came loose during routine maintenance. For this reason it is sold for spares/repairs. It was working up until this panel came loose. Due to this, it is sold for spares/repairs. The unit could still be put back together or used for parts with the correct machinery available.

This Oxford Instruments OptistatDN Nitrogen Bath Cryostats from a university laboratory where it was (more) surplus to requirements. It is in good cosmetic condition, but due to the nature of the item we are unable to test it.

Epredia HM525 NX UV Cryostat This was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up and is in full working order (digital thermometer not included). It is in excellent cosmetic condition with minor marks.

CryoBox Freezer Rack THERMO SCIENTIFIC 5038-4322 Brand new in original packaging For standard cryoge (more)nic boxes with ease with these durable stainless steel and aluminum freezer racks, which fit most standard chest freezers and upright freezers Part number: 5038-4322 For 12 standard Cryoboxes 12-place rack (4X3) Type: horizontal Dimensions: 22.5 x 44.4 x 14.3 cm (lxWxH)

Racks for Eppendorf CryoCube F440/ F570 ultra low freezer. Stainless steel. Four trays per rack. Rac (more)k dimensions (height*width*depth): 230*145*560 mm. For freezer boxes with a base of up to 136 x 136 mm. Up to 16 boxes per rack. Suitable for U410 ULT freezer that can hold up to 15 racks.

Ohaus light-duty orbital shakers These reliable OHAUS laboratory shakers are instruments designed fo (more)r applications with loads up to 4 kg. To optimize sample mixing, two stirring orbits and speed ranges are available. One digital model intended for use with microplates, two digital models designed for use with accessories, and an affordable analog unit for daily shaking. All models are equipped with triple eccentric drive and integrated chip control systems that ensure precise, stable and reliable platform shaking for laboratories and beyond. - Flexible: with tray and a non-slip mat or, by removing the mat, the unit can be customized with over 20 accessories - Affordable and efficient for daily laboratory shaking needs Applications ELISA tests, cell cultures, immunoassays, protein studies, bacterial and yeast cultures, dyes / bleaches, absorption techniques, DNA studies Display Easy-to-read independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models) and knobs with markings for basic controls (analog models). Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum Construction features Non-slip mat (29.9x22.2 cm) included in all models except the model with microplates

The HX7.4P2 C is a powder coated beam scale equipped with the PUE HX7 indicator. This 4-load-cell me (more)chanical design can be used in a wider range of applications when compared to the standard pallet solutions. Beam spacing allows to place any loads onto the scale using either a forklift or a transporter crane. Transport-supporting handles facilitate transfer of the device to the place of use. The indicator has been outfitted with a colour 7" graphic display and a diode bar graph which via red and green lights presents the current load mass referred to the scale range or preset minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Eppendorf 5427R Refrigerated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor The Eppendorf 5427R Refrige (more)rated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor stands out when it comes to meeting the demand for high sample throughput, unlike many other centrifuges that struggle with capacity limitations. This centrifuge boasts increased workloads, delivering rapid run times with unwavering reliability. What sets this centrifuge apart is its user-friendly design and intuitive interface, ensuring a comfortable and straightforward user experience allowing easy adjustments within the speed range of 100 to 16,220 RPM. Consequently, the 5427R emerges as the perfect solution for advanced research needs. Moreover, it incorporates innovative compressor technology that takes ecological considerations into account. This technology allows for precise temperature control from Ambient -11°C to +40°C, safeguarding sensitive samples and ensuring their optimal preparation for analysis. The 5427R also offers a wide range of high-quality aluminum rotors tailored to specific applications. In addition to established rotor types, it introduces specially designed models to cater to diverse research requirements.The included FA-45-30-11 Fixed Angle Rotor reaches a maximum speed of 14,000 RPM and maximum RCF of 20,817 x g. INCLUDED: The Eppendorf 5427R Refrigerated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor includes: - FA-45-30-11 Fixed Angle Rotor with Aerosol Lid - Rotor Wrench - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5427R Refrigerated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor SpecificationsMaximum Speed16,220 RPM (14,000 RPM with included rotor)Minimum Speed100 RPMMaximum RCF25,001 x g (20,817 x with included rotor)Maximum Capacity48 x 1.5/2.0 ml (30 x 1.5/2.0ml with included rotor)Temperature Range-11°C to +40°CTimer10 seconds to 9:59 hours, with continuous runAcceleration Time22 secondsDeceleration Time19 secondsNoise Level< 56 dB(A)Dimensions (W x D x H)12.6 x 21.3 x 10 in. (31.9 x 54 x 25.4 cm)Weight66.1 lb. (30 kg)Electrical Requirements120V, 50/60Hz, 4.6A, 550WComparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(4) { background-color: #fffacd; }