ZYMARK TurboVap II Evaporation/Concentrator System

ZYMARK TurboVap II Evaporation/Concentrator System The Turbovap 2 has 6 sample positions of 200 ml T (more)he TurboVap II Concentrator Workstation is a microprocessor-controlled concentrator that provides automated sample evaporation, unattended operation, convenience and speed. Water bath capacity: 6.4 L of distilled water Gas Supply Requirements: Minimum inlet pressure 30 psi/2.1 bar. Maximum inlet pressure 80 psi/5.5 bar. Power supply: 220–240 V~, 50 Hz, 5 A Dimensions (LxDxH): 53.8 cm x 30.5 cm x 30.5 cm / 21.2" x 12" x 12" Weight 18.4 kg/40.5 pounds Without tubes / Matra With traces of rust Functional heating system No leak optical sensor not checked

Labconco CentriVap Benchtop Concentrator with Heat Boost Eliminates bumping and foaming, maximiz (more)es trace solute recovery Microprocessor-controlled 300w heater covers ambient to 100C in 1° increments Optional Heat Boost™ surrounds chamber with extra controlled heat at programmed temperature, in closer proximity to sample Electrical receptacle included for an accessory vacuum pump (available separately) Vacuum delay prevents bumping by allowing rotor to achieve speed before applying vacuum Quick-Start™ button starts rotor, heater, timers and pump Quick-Stop™ system stops pump, opens vacuum release valve and stops rotor in seconds after time expires or RUN/STOP button is pressed Memory stores nine user programs (temperature/heat time/run time); LCD shows operating parameters and programs Compact, low-profile design Choice of removable acrylic lid with large, durable lid seal, or glass lid for use with solvents that attack acrylics Safety latch locks lid when rotor is turning, prevents start-up when lid is open Corrosion-resistant sample chamber has epoxy finish for easy cleaning and decontamination Microprocessor-controlled brushless motor runs at up to 1725rpm Stacks on top of cold trap to save space With 0.5 in. O.D. vacuum tube fitting INCLUDED: The Labconco 7810012 CentriVap Benchtop Concentrator with Heat Boost, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap micro IRVacuum Concentrator Compact dimensions: 8.8L x 10.4W x 8.9 in.H (22. (more)4 x 26.4x 22.6cm); overall depth including glass trap: 12.9 (32.8cm) PTFE coated chamber Transparent infrared (IR) glass lid directs heat to the samples to speed evaporation and reduces cross contamination from condensation Built-in PTFE coated diaphragm pump Microprocessor-controlled 300W heater Centrifugal motion of 1700 rpm Built-in front-mounted analog vacuum gauge Easy-to-read LCD display 75mL glass trap Quiet operation Fast evaporation Click Here to View Product Video INCLUDED: The Labconco 7701020 CentriVap micro IRVacuum Concentrator, 115V, 60Hz includes: - Rotor 1.5ml x 24 - CentriZap micro IR LED Strobe Light - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco Refrigerated CentriVap Benchtop ConcentratorTheRefrigerated CentriVap Centrifugal Concentra (more)tor is designed to rapidlyconcentrate multiple small heat-sensitive samples, such as RNA and proteins,using centrifugal force, vacuum and controlled temperature. This exclusiveconcentrator combines a refrigeration system that cools to -4ºC with a heaterthat warms to 100ºC to achieve the user’s desired set point temperatures. Click Here to View Product Video INCLUDED: The Labconco 7310020 Refrigerated CentriVap Benchtop Concentrator, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Rotor for Medium Capacity Concentrator RH24-18 Thermo Scientific Savant SpeedVac New equipment in it (more)s original packaging THERMO reference: RH24-18 Capacité : 18 x 52 mm Mini-scintillation / 24-place; 18 x 52mm mini scint vials For Use With (Equipment) : SPD1030, SPD120, SPD130, SPD140DDA

Yamato DKN-302C Programmable Forced Convection Oven 27L, 115V Temperature Range Ambient +10°C to 26 (more)0°C Temperature Distribution Accuracy ± 2.5°C (at 210°C) Chamber Volume 27L Features - Best seller based on excellent performance and affordability - Superior temperature accuracy - DKN302C/312C/402C/412C/602C/612C models come with observation windows - Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions) - Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities - Increased safety and self-diagnostic functions - Overheating prevention and calibration off-set are possible with auxiliary functions - Easy to use and maintain - Built in exhaust ports Programmable 27L forced convection constant temperature oven with extended functions and safety features. Bestseller based on excellent performance and affordability. Superior temperature accuracy. Comes with an observation window. Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions). Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities. Overheating prevention and calibration off-set are possible with auxiliary functions. Easy to use and maintain. Equipped with built in exhaust ports. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKN-302C Programmable Forced Convection Oven 27L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson PIPETMAN G Multichannel P8x200, 20-200 uL Pipette Designed PIPETMAN G brings a new level of c (more)omfort into the Gilson range, with a redesigned piston mechanism that reduces the force needed to aspirate and dispense liquids. PIPETMAN G maintains the trusted durability, accuracy, and reliability of the original PIPETMAN pipettes with comfort. Pipetting ComfortPIPETMAN G offers one of the lowest pipetting forces commercially available. With a redesigned piston assembly system and high quality piston grease, PIPETMAN G guarantees hours of comfortable pipetting.Reliable ResultsPIPETMAN G relies on the legendary accuracy, precision, and reliability of PIPETMAN with improved pipetting comfort. Built-to-Last and ConvenientMade of PVDF and stainless steel, the PIPETMAN G offers premium durability. The PIPETMAN G clip ejector allows for convenient access to serviceable parts. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G Multichannel P8x200, 20-200 uL Pipette includes: - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Crest Ultrasonics Mesh Basket for P230 Ultrasonic Cleaner The Crest Ultrasonics Mesh Basket for P230 (more) Ultrasonic Cleaner features a mesh size of 8 x 8mm and a wire thickness of1mm making this ideal for use inultrasonic cleaning.All baskets are equipped with drain handles, helping toprevent unnecessary carryover of the cleaning agent andkeeps your workplace clean. The P230D Stainless Steel Mesh Basket is 9" in length x 5" in width x 3.5" in depth and is for use with the P230 Ultrasonic Cleaners. The Crest Ultrasonics Mesh Basket for P230 Ultrasonic Cleaner is brand new in box . Includes a Full 1 Year Parts and Labor Warranty.

Temperature settings: -18°C/-20°C/-22°C/-24°C/-26°C Dimensions (HxWxD): 1850 x 600 x 650 mm Internal (more) dimensions (HxWxD): 1580 x 450 x 360 mm Capacity: 282 L

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW