Thermo Scientific ThermoFlex 900 Recirculating Chiller Lab

Alpha Series - Cooling thermostats with essential functions LAUDA Alpha offers reliable technology a (more)nd modern design for temperature ranges from -25°C to 100°C. This line of devices is suitable for internal and external thermostats with non-flammable liquids (water and water / glycol). Thermostats are the perfect solution for most laboratory temperature control applications. Reduced to the most essential functions, this product line will win you over for its reliability and ease of use. Under / over temperature alarm; countdown function; drain screw; 1 point calibration The RA 8, RA 12 and RA 24 cooling thermostats have a tank lid and pump connections as standard, helping refrigeration across the entire temperature range from -25 to 100°C. Finally, automatic compressor control extends compressor life and offers savings on operating costs. Examples of specific applications - Preparation of samples in chemistry and pharmacy - Functional tests of electronic components - Test of sliding bearings - Beer forcing test - Valve test - Stress test - Bending test of the notch - Expansion test - Brookfield test - Semiconductor coating Notable features - Cost savings thanks to automatic compressor control: cooling capacity is provided only when it is needed - Easy cleaning of the cooling air inlet by simply removing the front cover without tools - Stainless steel tank - Connection of the drain on the rear Graph of cooling performance of RA Alpha Lauda cryostats. Pump performance graph. TECHNICAL VISUALIZATION 1 - Control head 2 - Pump connections: return to bath and pump outflow 3 - Bath cover 4 - Handle on front and back 5 - Removable front cover 6 - Grille on both sides 7 - Four mounting feet 1 - Mains cable 2 - Rating label 3 - Cooler cable 4 - Bath drain nozzle

This Stem Corporation Block Heater & Chiller  Model - RS2550 was removed from a university  (more)lab where it was surplus to requirements. The heater powers up and has been tested with a digital thermometer (not included).When set to 37˚C the display showed 37˚C and the thermometer measured 36.2˚C.When set to 55˚C (max) the display showed 57˚C and the thermometer measured 53˚C. We were unable to test the shiller as we don't have the connecting cable. The magnetic stirrer seems to be working well. 25 x 27mm diameter tube holes

Thermo Scientific ThermoFlex 900 Recirculating Chiller Lab This item was removed from a university w (more)here it was surplus to requirement. It is in good cosmetic condition, and it is fully operational as it has recently undergone servicing. As part of the service, its Fan Head was replaced so it now displays: 0 Run Hours.

Polyscience CA10A3P2-41AA1N Durachill Chiller with Positive Displacement Pump, -10 to 70°C 2900W 230 (more)VACFeatures - Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA10A3P2-41AA1N Durachill Chiller with Positive Displacement Pump, -10 to 70°C 2900W 230VAC is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA10A3P2-41AA1N Durachill Chiller with Positive Displacement Pump, -10 to 70°C 2900W 230VAC SpecificationsPart NumberCA10A3P2-41AA1NCooling Capacity @ 20°C2.9 kWCooling Capacity @ 10°C1.93 kWCooling Capacity @ 0°C1.0 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate3.5 gpm / 13.2 lpmPower Requirements230V, 60HShipping Weight177 lbs / 80.3 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(8) { background-color: #fffacd; }

Polyscience CA03A1T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C, 700 to 2900W, 120VACFe (more)atures - Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA03A1T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C, 700 to 2900W, 120VAC is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA03A1T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C, 700 to 2900W, 120VAC SpecificationsPart NumberCA03A1T1-41AA1NCooling Capacity @ 20°C1.4 kWCooling Capacity @ 10°C0.99 kWCooling Capacity @ 0°C0.53 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range20 to 90 psi / 138 to 689 kPaMaximum Pump Flow Rate3.5 gpm / 13.2 lpmPower Requirements120V, 60Hz, 16.3AShipping Weight169 lbs / 76.7 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Polyscience 6960T57A270D 1.5HP Chiller with Turbine Pump, Water-Cooled, 230V, 60HzDuraChill Chillers (more) provide cooling power for demandingapplications and serve as an economical alternative to tap water coolingsystems. All models feature a microprocessor-based controller, digitalTemperature Display (C or °F), one-touch set point display, and digitalPressure/Flow Rate Display (PSI, kPa, GPM, LPM) with push-Button selection. Tooptimize cooling efficiency and performance, these sophisticated Chillers alsofeature a modulated refrigeration system. As a result, temperature stability isgreatly enhanced and compressor life extended. Designed for high heat removal in demanding environments,our DuraChill® Chillers provide robust and reliable temperature control forclosed, external systems such as pilot plants, medical diagnostic equipment,metalworking lasers, and plastic molding machines. These chillers are suitablefor most applications with their many options and accessories.Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available INCLUDED: The Polyscience 6960T57A270D 1.5HP Chiller , 5°C to 35°C, 5200W; 208-230V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Measurement range: 0°C – 100°C

Pipette tips 100 μL with filter GILSON DF100ST Diamond, sterile, rack of 96 pieces. You can also eas (more)ily order PIPETTES and/or PIPE HOLDERS  . Volume: 10 – 100 µL Rack of 96 pieces Color code: Yellow Length: 51 mm High quality PP Sterile With filter

Qiagen QIAcube Automated DNA / RNA Purification Robot Shaker and Centrifuge Lab This was removed fro (more)m a university lab where it was surplus to requirements. The unit powers up and is in good working order. It is in excellent cosmetic condition. Tests preformed: Centrifuge.Time 1: 60 secSpeed 1: 6000 gAcceleration: 9 Shaker.Time: 60 secTemperature: 20ºcFrequency: 2000 rpm Software Version:QIAcube batchMainboard firmwareMainboard PLCMainboard bootloaderMainboard CPLDLd board firmwareLd board bootloaderCentrifuge firmwareCentrifuge parameterU1FIW-50-061-PFIW-58-902-SFIW-50-063-APLD-24-006-AFIW-51-661-AFIW-51-602-AFIW-52-881-HFIW-52-802-A

A&D Weighing Phoenix GH-202 Semi-Micro Dual Range Analytical Balance, 51/220 g, 0.01/0.1 mg Capa (more)city 51 g / 220 g Readability 0.01 mg / 0.1 mg Repeatability 0.02 mg / 0.1 mg Features - Delivers ultra-precise readability of 0.01 mg / 0.1 mg with repeatability of 0.02 mg / 0.1 mg for consistent accuracy - OES technology offers high performance and a wider range of models with reliable accuracy & precision - Adjustable environmental (manual or automatic) response characteristics to help cope with the effect of drafts and vibrations - Automatic self calibration to maintain accuracy under temperature changes - Save time with one-touch Full Digital Calibration FDC (Internal or External). Makes calibration simple to perform within seconds - Easy to clean and operate with anti-static glass breeze break and SS steal pan, spill proof ring and base plate - Advance stabilization bandwidth allows for fast response times - Auto power on ensures ready-to-use and optimal performance every time, reducing warm up/wait time - Balance ID and Clock/Calendar function allows for time & date stamps and GLP reports - Data memory plus the ability to export through bidirectional RS-232C or optional USB, Bluetooth & Ethernet - Underhook capability for density measurement and weighing of large or magnetic materials The A&D Weighing Phoenix GH-202 Semi-Micro Dual Range Analytical Balance, 51/220 g, 0.01/0.1 mg, brings precision and reliability to the lab with advanced features tailored for demanding applications. Leveraging high-performance OES technology, this model ensures exceptional accuracy across a wide range of tasks, and its adjustable environmental response characteristics help counteract the effects of drafts and vibrations, creating a stable weighing environment. Built for ease of use and durability, the GH-202 features an anti-static glass breeze break, a stainless steel weighing pan, and a spill-proof ring—all of which streamline maintenance and extend the unit's operational life. With a semi-micro precision level, it delivers ultra-fine readability of 0.01 mg in its lower range and 0.1 mg in its upper range, making it highly suitable for applications demanding meticulous accuracy. Engineered to save time and increase productivity, the GH-202 includes automatic self-calibration to uphold measurement accuracy even with temperature shifts. The one-touch Full Digital Calibration (FDC) function allows quick and straightforward calibration within seconds, whether using internal or external calibration. Fast stabilization times and a repeatability of 0.02 mg in the lower range ensure that precise readings are available with minimal waiting, supporting smooth workflows in fast-paced lab settings. For comprehensive data management, the Phoenix GH-202 features a balance ID, a clock/calendar function for time-stamped GLP reporting, and extensive data memory capabilities. Connectivity options include standard RS-232C, with additional choices for USB, Bluetooth, and Ethernet to meet diverse data-sharing requirements. Designed with flexibility, this balance also includes underhook weighing for density measurements and supports multiple measurement units, making it an invaluable tool for labs requiring high-precision and adaptable weighing solutions. Supported by a comprehensive 5-year warranty, it ensures long-term reliability and peace of mind for all your precision weighing needs. INCLUDED: The A&D Weighing Phoenix GH-202 Semi-Micro Dual Range Analytical Balance, 51/220 g, 0.01/0.1 mg includes: - Anti-Static Glass Breeze Break - Weighing Pan - Pan Support - Fine Range Breeze Break Ring - Dust Plate - Floor Plate - Terminal Cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty