Lawler Model RU-390-6 Rust Test Apparatus Liquid Bath

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. The 'A' models (Agitation: H 8 A; H 16 A) have a magnetic stir bar liquid circulation system as standard, to improve temperature uniformity. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Water circulation The circulation system guarantees optimal temperature distribution throughout the tub. It is managed by a magnetic electric motor which transmits the rotation to a PTFE-coated stirrer in the tank. The agitator draws the water towards the center and then distributes it to the rest of the tank. The water circulation is activated via the main switch. Recommended accessories - Water level regulator. The water regulator located on the back of the water bath is used to maintain constant the set water level during water loss due to evaporation. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Laboratory water bath 16L FUNKE GERBER WB 436 D New equipment in its original packaging Stainless st (more)eel bain-marie with digital control Box contents: basic device as shown Universal water bath WB 436-D (digital) Digital adjustment of the setpoint PT100 sensor (platinum sensor) Overheating protection (even when container is empty) Stopwatch (1 – 99 minutes) with sound signal generator Technical data: Temperature range: up to 100°C Connection: 230 V / 50 – 60 Hz / 1000 VA Dimensions L × W × H: 396 × 331 × 265 mm Content: approx. 16L Mass: approximately 10 kg Delivered without lid

Yamato BM-100 Analog Water Bath 4L, 115V Water Tank Capacity 4L Operating Temperature Range Ambien (more)t +5-95°C Temperature Accuracy ±2°C (at 60°C) Features - Analog set up system - Thermometer is included to verify actual temperature - Protected water tank prevents burns caused by contact - CSUS316 pipe heater 500W - Comes with 1 Year Manufacturer's Warranty

Lauda CS 6-D recirculating bath with heating. Ambient temperature range +5ºC to +199.9ºC. Great temp (more)erature stability. Internal dimensions (HWD) 15 x 13 x 15 cm. External dimensions (HWD): 23 x 40 x 40 cm. It has some scratches and other cosmetic damage that does not affect its operation. The Lauda recirculating bath type CS6 is suitable for applications that require a precise temperature. It is equipped with a built-in circulation pump making it ideal for uniform heating of reaction mixtures.

Boekel Scientific 290200 Hot Tub - Water Bath 14L w/polycarb lid 115VThe Boekel Scientific 290200 Ho (more)t Tub -Water Bath 14L w/polycarb lid can be used as a standard water bath or as aboiling water bath. User simply sets temperature into “boiling mode”. The unithas digitally controlled temperature with a built-in programmable timer. Thetemperature control is extremely accurate due to a three point factorycalibration set in 0.1°C increments up to 100.0°C and PID controller. The BoekelScientific 290200 Hot Tub - Water Bath 14L features a large digital display, aseamless, passivated stainless steel tank, and heating indicator LED.Applications General purpose water baths offer excellent performance and are ideal for general lab applications. The special "boiling mode" is a convenient feature for melting agar and other applications requiring boiling temperature. INCLUDED: The Boekel Scientific 290200 Hot Tub - Water Bath 14L w/polycarb lid 115V includes: - Polycarbonate Lid - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

If you buy a WLY series balance by July 31, 2024, you will receive each of these products along with (more) a FREE lifetime license for the Workflow Module. Precision Balance WLY Fast and accurate weight determination thanks to the duo: the WLY multifunction balance and the PUE7 weighing terminal. Ease of operation and maximum automation of the weighing process. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations and differential weighing. The power of WLY’s working mods. Use the potential Barcode scanners, receipt printers, label printers, RFID readers, PC equipment or an additional weighing platform – thanks to multipurpose software, WLY balance can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. DIY with WLY With WLY you will Do It Yourself: You will program on-screen keys and functional keys You will program infrared proximity sensors You will design printouts You will design text data that is displayed in an indicator display. This balance is the result of a combination of our experience and true precision. Want to generate labels? You can. With Label Editor software, you will generate: Standard labels for single products C labels for cumulative containers CC labels for containers with cumulative containers. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

IKA ROTAVISC hi-vi HELI Complete Viscometer Viscosity Measuring Range 200 to 80,000,000 mPas Viscosi (more)ty Accuracy (FSR) ±1% Speed Range 0.01 to 200 rpm Features - Ensures measurement accuracy of ±1% of the measuring range with repeatability of ±0.2% - Measures viscosity from 200 to 80,000,000 mPas, suitable for a broad range of applications - Allows for stepless speed adjustment from 0.01 to 200 rpm for precise control - Built-in graph function for real-time data visualization - Equipped with overload protection for safe operation in harsh environments - Supports both timer and continuous operation modes - Ideal for high sample throughput, frequent spindle changes, and use in varying locations - Offers connectivity for data logging The IKA ROTAVISC hi-vi I HELI Complete is designed to determine the viscosity of highly viscous liquids in applications ranging from laboratories to quality control. It features an intuitive 4.3″ TFT display for easy operation, supported by a digital spirit level for correct setup and a simple ramp function for repetitive tasks. The device ensures high measurement accuracy with a precision of ±1% for both Newtonian and non-Newtonian fluids, and a reproducibility of ±0.2%. The ROTAVISC offers stepless speed adjustment for versatile use. Additionally, the motorized IKA HELISTAND enables uniform up-and-down movement of the viscometer in the sample, enhancing the viscosity measurement process. The package includes a standard spindle set (SP 7-SP 12), a protective bracket, a temperature sensor, and the HELISTAND stand with a T-spindle set, covering a viscosity measuring range of 200 to 80,000,000 mPas. Click Here to View Product Video INCLUDED: The IKA ROTAVISC hi-vi HELI Complete Viscometer includes: - ROTAVISC hi-vi I HELI Complete - SP set-2 - PT 100.8 - HELISTAND - T-SP-SET - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience MX23P100-A11B 23L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60HzFeatures - (more) Large, universal icon and English display - On-screen prompts - Single-point calibration capability - Working temperatures from ambient +10° up to 150°C - DuraTop™ insulating, chemical-resistant top deck - Temperature stability of ±0.07°C - Controller displays internal bath temperature, set-point and more–all on one easy to read screen Three control buttons and plain-text on-screen prompts make the setup and operation of the MX Temperature Controller easy and straightforward. Redundant over-temperature protection, high and low temperature limits and alarms alert you instantly to conditions that fall outside normal operating parameters User-settable high-temperature safety provides over-temperature and low liquid level protection. Patented, integrated design protects pump and heater while simplifying cleaning and maintenance. PolyScience Circulating Bath with MX Temperature Controller. It is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Click Here to View Product Video INCLUDED: The Polyscience MX23P100-A11B 23L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty