Lauda Eco Gold with Lauda Eco RE 420 Refrigerated Water Bath Lab

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in good working order. (Digital thermometer used for testing and is not included). It is in good cosmetic condition with minor marks.

Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Water Bath, and Selectable Glassware, 115V  (more)Speed Range 5 to 315 RPM Evaporation Capacity Up to 23 ml/min Pressure Setting Range 0 to 1013 hPa Features - Rotate faster & slower (315 RPM – 5 RPM) than any other rotary evaporator on the market to test new SOPs and develop better methods - Unit is easy to disassemble and clean after use - Program rotation direction changes, ramps, and other automations to get more done in the lab at once - Automatic on/off and suction speed adjustment via wireless vacuum controller - Easily analyze the residue left over after distillation - Orient for left or right-handed operation based on your limited bench space Standard rotary evaporator designed with vacuum controller and a slide jack mechanism for convenient height adjustment. Set includes the VR102S Vacuum Controller, BM302-A Water Bath, and your choice of glassware. Market leader in rotation speed range at 5 to 315 RPM. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Water Bath, and Selectable Glassware, 115V includes: - Glassware Set Selected Above - VR102S Vacuum Regulator - BM302-A Water Bath - Rotary Joint - 1L Evaporation Flask - 1L Receiving Flask - Ball Joint Clamp - Flask Clip - Vacuum Seal - Condenser Insulation Kit - Condenser Bracket (Only for Glassware Sets B & C) - Hex Wrench - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Grant Y14 Precision Thermostatic Bath. Capacity 14 L. Digital control. Temperature range from ambien (more)t +5 °C to 100 °C. Water circulation to achieve accuracy of ±0.2 °C at 37 °C. High quality stainless steel tank, corrosion resistant. Roof type lid. Overheat protection. Low water level alarm. Dimensions (WDH): tank 300*240*150 mm; external 380*330*330 mm. Manual not available. Elevate the precision of your laboratory with the Grant Y14 Precision Thermostatic Bath, available at Galileo Equipment. This 14 L unit features digital control and a temperature range of +5 °C to 100 °C, ensuring unmatched accuracy. Its robust, corrosion-resistant stainless steel design includes a canopy-type lid and overheat protection and low water level alarm systems. Perfect for researchers looking for reliable and consistent results. Find out more at www.galileoequipos.com.

Thermostatic bath with  circulation GFL 1012. Volume 7 L. Ambient temperature range +5 ° C to + 99.9 (more) ° C. Digital display Temperature adjustment by microprocessor with increments of 0.1 ° C. Short preheating. Security systems overheating and alarms. Stainless steel. Cover and rack. User manual.

Julabo SW23 Shaking Water Bath 115V/60Hz (NRTL Certified) Working Temperature Range 20°C to 99°C Sh (more)aking Speed Range 20 to 200 RPM Volume 20L Features - Microprocessor technology with PID temperature control - Bright Multi-Display (LED) - Seamless, splash-proof keypad - Splash-proof mains switch - Electronic timer for setting the running time (0:01 to 9:59 h:min) - On-line communication via built-in RS232 interface - Early warning system with high and low temperature limits - Drain screw for conveniently emptying the bath - Dry-running protection / safety temperature fixed at 105 °C - Wide range of accessories including lift-up Makrolon bath cover available - EasyTemp control software is available free of charge - Removable shaking carriage - Shaking frequency adjustable from 20 to 200 rpm - Shaking frequency indicated on Multi-Display (LED) - Shaking stroke 15 mm - With integrated circulation pump The JULABO SW shaking water baths provide for unsupervised sample incubation. Stainless steel construction with an operating range from +20°C to +99.9°C. User-friendly operation via keypad with bright LED display. Electronic timer from 1 min to 9h 59min. Integrated RS232 interface for integration to PC software for control and data logging. Early low water level warning system. Early warning system with high and low temperature limits ensures that samples maintain the proper temperature. A removable shaking carriage for easy sample removal. A wide range of accessories, including bath covers, are available. Shaking frequency adjustable from 20 to 200 rpm. Shaking stroke = 15 mm. SW22 unit with ± 0.2°C stability. SW23 incorporates a water circulation pump for a stability of ± 0.02°C. INCLUDED: The Julabo SW23 Shaking Water Bath 115V/60Hz (NRTL Certified) includes: - Removable Shaking Carriage - Integrated Circulation Pump - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA HB Digital Heating Bath Filling Volume Max 4 l Heating Temp. Range Room Temp. to 180°C Heat Cont (more)rol Turning Knob Features - 4 l bath volume - Max. media temperature: 180 °C - Ergonomic handles - Key button to lock heating bath temperature - Clear, black-and-white display - Safety operating modes A, B, C - Permanent set-point/ actual temperature display - USB interface The IKA HB Digital Heating Bath offers a 4-liter bath volume and a maximum media temperature of 180 °C. It features ergonomic handles and a key button to lock the heating bath temperature. The clear, black-and-white display provides a permanent set-point and actual temperature display. Equipped with safety operating modes A, B, and C, the bath ensures secure operation. It also includes a USB interface for easy connectivity. The heating range is from room temperature to 180 °C, with precise control via a turning knob and a resolution of 1 ±K.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Air N2 CO2 Aux.

The 2103 EnVision Multilabel Plate Reader is a fast, sensitive and versatile benchtop reader that de (more)livers optimized performance in every application and for every label. The unique design features modular label-specific optical mirror modules, high energy flash lamps, and high speed detectors. Light Source: Xenon flash lamp Plate Formats: 1 to 3456 wells Temperature range: from 2°C above ambient up to 45°C (0.5 °C increments) Uniformity: ± 1°C Heating time: < 10 minutes (from ambient up to 37°C) Shaking: linear, orbital, dual orbital Dispense volume: 2-475 µL (1 µL increments) Pump speed: 100-500 µL/s Dead volume: 750 µL. With pump-back function < 50 µL using stardard tubing length and factory settings. Typical Throughput: Fi/Abs (On the fly): 96 wells – 22 s, 384 wells – 27 s, 1536 wells – 36 s Fi/Abs (10 flash): 96 wells – 32 s, 384 wells – 1 min 03 s, 1536 wells – 2 min 56 s Fluorescence polarization (30 flash): 96 wells – 37 s, 384 wells – 1 min 22 s, 1536 wells – 4 min 15 s TRF LANCE (30 flash): 96 wells – 37 s, 384 wells – 1 min 22 s, 1536 wells – 4 min 15 s TRF DELFIA (100 flash): 96 wells – 55 s, 384 wells – 2 min 32 s, 1536 wells – 8 min 52 s AlphaScreen STD: 96 wells – 1 min 32 s, 384 wells – 4 min 54 s, 1536 wells – 19 min 28 s AlphaScreen HTS: 96 wells – 51 s, 384 wells – 1 min 52 s, 1536 wells – 9 min 23 s Detection Limit: Fluorometry (Fluorescein): 96 wells (200 µL) – < 4 pM/ < 0.8 fmol/well, 384 wells (50 µL) – < 4 pM/ < 0.2 fmol/well, 1536 wells (7.5 µL) – < 20 pM/ < 0.15 fmol/well Fluorescence polarization (Fluorescein 1 nM, SD): 96 wells- < 3 mP, 384 wells – < 2 mP, 1536 wells  – < 7 mP TR-Fluorometry (Europium): 96 wells (200 µL) – < 55 fM/ < 11 amol/well, 384 wells (50 µL) – < 55 fM/ < 3 amol/well, 1536 wells (6.6 µL) – < 150 fM/ < 1 amol/well Standard Luminometry (ATP): 96 wells (200 µL) – < 75 pM Enhanced Luminometry (ATP): 384 wells (50 µL) – < 10 pM Photometry Measuring range: 96 wells – 0 to 4 OD, 384 wells – 0 to 4 OD, 1536 wells – 0 to 3 OD Accuracy (at 2 OD): < 2 % Precision (at 2 OD): < 0.1% AlphaScreen (STD and HTS): 384 wells (25 µL, phosphorylated bio-peptide, kinase assay): < 100 amol Dimensions (HxDxW): 580 x 550 x 420 mm Weight: 50 kg

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7&rdquo; TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software &quot;LABEL EDITOR&quot;, and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.