Grant GR150 Circulating Water Bath

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Histological water bath from 25°C to 80°C for the laboratory This water bath model is used in histol (more)ogical, chemical, clinical and bacteriological laboratories for stretching and drying tissue samples. The exact temperature control of the LAUDA Hydro H 2 P water bath ensures clear visibility of the sample and gentle drying even on the heated edge. The instrument operates in a temperature range from 25 to 80°C with a constant temperature of ± 0.5 K. The body of the bath is made of black anodized aluminum. The low height of the bowl allows comfortable and safe work. - Temperature adjustment by knob with temperature scale - Temperature display by means of a reference thermometer on the edge of the pool - Tank interior in black anodized aluminum If you want to know more about water baths in histopathology and new histotechnologies in general, we recommend the HistoTube YouTube channel. Accessories Lid, to cover the bath interior, made of black anodised aluminium, with ball handle.

Temperature range: up to 100°C Inner diameter of bath: 160 mm

Laboratory water bath 16L FUNKE GERBER WB 436 D New equipment in its original packaging Stainless st (more)eel bain-marie with digital control Box contents: basic device as shown Universal water bath WB 436-D (digital) Digital adjustment of the setpoint PT100 sensor (platinum sensor) Overheating protection (even when container is empty) Stopwatch (1 – 99 minutes) with sound signal generator Technical data: Temperature range: up to 100°C Connection: 230 V / 50 – 60 Hz / 1000 VA Dimensions L × W × H: 396 × 331 × 265 mm Content: approx. 16L Mass: approximately 10 kg Delivered without lid

Temperature Range: Ambient to 100°C Temperature Stability: ±0.1°C Temperature Uniformity: ±0.2°C Tem (more)perature Presets: 4 Capacity: 5 L Chamber Material: Stainless Steel Controller Type: Digital Heating Capacity: 300 W Includes Clear Polycarbonate Gable Cover Dimensions (LxWxH): 246 x 355 x 232 mm

Vial Capacity: 27 standard Gilson rack Liquid Flow Rate: From 0.01 to 120 ml/min, continuously. Liqu (more)id-contact Materials: 316L stainless steel or titanium, FEP, PTFE, PEEK, and PP. Sample Cross-contamination: Lower than 1 ppm, with liquid level detector and recommended values for rinsing parameters (4 mm immersion, 20 ml/min., 1 ml and 2 ml for needle inside and outside respectively), and lower than 50 ppm without liquid level detection.

The analyzer ploidy CyFlow® is a flow cytometer compact for the analysis of ploidy, DNA analysis, hi (more)gh-resolution and genome size for plants, animals and micro-organisms in two minutes. Features a UV-LED (365 nm) and/or a green laser (532 nm), combined with the reagents CyStain®, provides an analysis of DNA high-resolution with DAPI or propidium iodide. The result is displayed as a histogram of DNA on the screen. Saves time and money, provides accurate results quickly with an efficient workflow and validated. Optional: autosampler for up to two 96-well plates or 120 test tubes. It shows the price for CyFlow® Ploidy Analyser - CY-S-3039_V1 (UV-LED 365nm; 1 optical parameter). For other models consult the drop-down. Features · Determination of the size of the plant genome, and C-Value · Detecciónn with accuracy +/- 1 chromosome · Detection of apomixis and reproductive behavior · Identification of citotipo in natural populations · Detection of hybrids · Analyses of plant chimeric and polisomatías · Detection of sex · It is not necessary for the preparation of metaphase chromosomes · Protocols preparing simple ready-to-use · Fluorescence of DNA-based Propidium Iodide and DAPI · Allows testing at early stages of seed Specifications Possible lasers or light sources: 1-2 light sources: UV-LEDS @ 365nm and green laser: 30mW @ 532nm Optical system: optical System modular with photomultiplier tubes (PMT) for the detection of SSC, DAPI and propidium iodide Fluid system: Cuvette, quartz for transport, laminar and approach to hydrodynamic processes. Count absolute volumetric true (TVAC) - for the determination of absolute particle Computer system: PC MS Windows ™ integrated LCD display TFT color 15 "folding Software: CyViewTM for acquisition and evaluation of data in real-time. Data format: Standard flow cytometry (FCS) 3.0 Accessories Autoloader CyFlow Robby 6 - Storage of samples protected against light. - Microtiter plates or sample tubes flexible Measurement: - 48, or 96 microtiter plates, V, U, and flat bottom as possible (max. 2); - sample tubes of 2 ml (max. 120) - Choice flexible of the sample volume. - Speed measurement continuously adjustable from 0.2 ál / sa 10ál / s Suitcase flight

Set of 2 clips for 250 ml Erlenmeyer For universal platform/stirrer Gross weight: 0.132 kg Gross dim (more)ensions: 15 x 13 x 8 cm