GFL 1003 Water Bath Wasserbad Bain Marie Incubation 14L 99°C

Water bath from 25°C to 100°C for the laboratory The ring bain maries for columns, Erlenmeyer flasks (more) or beakers are suitable for continuous operation, even unattended, thanks to the standard control of the level and lack of water. LAUDA Hydro water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range of 25 to 100°C. - The opening diameter of the water bath can be changed in approximately 20 mm increments by means of a set of rings that make up the lid. - The H 11 V, H 19 V models have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow use even with chemically aggressive fluids. - Temperature adjustment by knob with graduated scale Simple control: temperature adjustment with graduated knob. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

High-performance ultrasonic cleaner with heating for use in the practice, laboratory and workshop. T (more)he proven and particularly robust SONOREX ultrasonic baths clean thoroughly and gently by means of intensive cavitation bubbles, even in the hard-to-reach places of the cleaning objects. A user-friendly rotary handle control is used for easy setting of the cleaning time and bath temperature. The fully automatic SweepTec function prevents standing waves in the ultrasonic field and achieves particularly even cleaning. Ultrasound frequency: 35 kHz Temperature setting: 30°C – 80°C Time setting: 1-15 min, continuous operation Capacity: 45 L Work content: 30 L Level marking: yes Tub material: Stainless steel V2A (1 4301) Tub thickness: 2 mm Inner dimension (LxWxH): 500 x 300 x 300 mm Dimension (LxWxH): 540 x 340 x 500 mm Included Cover: A suitable stainless steel lid for an ultrasonic bath protects the bath fluid from external contamination and prevents odour nuisance caused by the added cleaning or disinfecting preparations. In addition, the noise emission that may be perceived as annoying during operation of the ultrasonic cleaner is reduced. The lids are designed in such a way that any condensation water that arises is led back into the tank. Hanging basket: For holding sound reinforcement material; made of stainless steel. During ultrasonic operation, nothing may be placed on the bottom of the tank, as abrasion may occur between the material to be sonicated and the ultrasonic oscillating tank. It is therefore recommended to use a suitable basket to hold the sonication material. The BANDELIN baskets are designed in such a way that the material to be sonicated is always in the optimum area of the cavitation field (1-2 cm from the floor) in the oscillating tank. With the help of a basket, the sonication material can also be conveniently placed in the unit and removed after operation, e.g. for rinsing, without the user coming into contact with the sonication fluid in the oscillating tank. Sieve holder: For cleaning test sieves in an ultrasonic bath; stainless steel. During ultrasonic operation, nothing may be placed on the bottom of the tank, as abrasion may occur between the material to be sonicated and the ultrasonic oscillating tank. It is therefore recommended to use a suitable basket to hold the sonication material. The BANDELIN baskets are designed in such a way that the material to be sonicated is always in the optimum area of the cavitation field (1-2 cm from the floor) in the oscillating tank. With the help of a basket, the sonication material can also be conveniently placed in the unit and removed after operation, e.g. for rinsing, without the user coming into contact with the sonication fluid in the oscillating tank. Insert strip: The insert strip is used to hold the insert vessels. When using chemically aggressive liquids (e.g. TICKOPUR J 80 U), removing chemically aggressive or abrasive contaminants or sonicating sample liquids, insert cups are used (indirect sonication). Because nothing may be placed on the bottom of the ultrasonic bath. Another advantage: When using an insert strip, several insert beakers can be sonicated with different liquids at the same time (e.g. removal of dental cements with STAMMOPUR Z in one and cleaning with simultaneous chemical disinfection of dental instruments with STAMMOPUR DR 8 in a second insert beaker). Please note that the surface tension of the water must be reduced in order to transfer the ultrasound to the insert vessel and therefore a cleaning solution (e.g. TICKOPUR R 33 – 3%) must be used as a coupling liquid / contact liquid.

Temperature range: RT +5 to 95°C and heat setting Capacity: 14 liters Dimensions bath (LxWxH): 350 x (more) 290 x 140 mm Basic temperature controller Stainless steel housing and interior Weight: approx. 15 kg

OHS are designed to ensure the highest safety standards. The resistant sealed case and the IP 54 deg (more)ree of protection guarantee durability over time even in the most aggressive environments. Continuous trouble-free operation in your lab, backed by a 3-year extended warranty. Constant torque at any speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional shaft stirrer and VELP OHS Series shaft stirrers. Thanks to the SpeedServo feedback system, the torque remains constant at any speed, even at maximum. Always having a constant torque is a very important parameter for the reproducibility of the analyses. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod drop into the liquid? SmartChuck™ technology makes this activity quick and easy with just one hand and no special accessories. Two simple movements allow you to unlock the protective ring and remove or replace the stirring rod. If the protection ring is opened during the analysis, the instrument interrupts the stirring, showing a safety message on the display. Maximum Protection and Security OHS Advances guarantee the highest safety standards. The IP54 degree of protection ensures maximum protection of the instrument from corrosion and high performance in challenging work environments. The stirring is activated through pressure, avoiding involuntary start-ups and the set speed is reached gradually. The large number of sensors and safety controls deactivate the stirring in case of overload, overheating or short circuit. Integrated Timer to Schedule Your Activities The OHS Digitals are equipped with timers that allow you to program the stirrer according to your needs and to carry out the reactions independently. Setting the timer is quick and easy, just press the dedicated button and select a time interval between 1 min and 99:59 hours. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS DIGITAL MODELS A - 7 Segment Display LED B - Torque indicator bar C - Low speed LED (only OHS 200) D - Gear key (only OHS 200) – Timer key for other models E - High speed LED (only OHS 200) – Timer LED for other models F - Speed control knob G - Timer LED (for OHS 200) - Upper lock LED for other models H - Timer key (for OHS 200) – Lock key for all models I - Lower Lock LED J - Main switch K - Smart chuck

Voltage range: 0 – 500 V Amperage range: 0 – 500 mA Power range: 0 – 150 W Timer: 1 – 999 min/0.1 –  (more)99.9 h Outputs dual in parallel, floating Leakage detection: > 500 μA No load detection: < 0.1 W Dimensions: 300 x 120 x 180 mm Weight: 5 kg

S+B Plinth Cabinet high RT White 600

Filter Pipette tips 30 L GILSON DF30ST Diamond Tipack, sterile, rack of 96 pieces. You can also easi (more)ly order PIPETTES and/or PIPE HOLDERS  . Volume: 2 – 30 µL Rack of 96 pieces Color code: Yellow Length: 51 mm High quality PP Sterile With filter