Perkin Elmer Wallac Victor 2 1420 Multilabel Counter with Liquid Injector

Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab This was removed from a university (more) lab where it was surplus to requirements. The unit powers up but was not tested further as there is no software with it. It is in good cosmetic condition with minor marks. Included with it are; 1x PC connection cable1x Spare mounting plate1x Bioworks opertating system manual1x Bioworks version 1.4 release notes1x Biomek 2000 user manual1x Biomek 2000 quick start guide1x Biomek 2000 installation and maintenance guide1x Beckman plus tutorial

Beckman Coulter BioMek FXP Laboratory Automation Workstation System This system was removed from a u (more)niversity where it was surplus to requirement. It is in good cosmetic condition and powers on, although due to the following error; "D1 axis error:pump failed to send boot request. (0512)."we are unable to test it further, and it is listed as Spares/Repair. We suspect the tip loader is faulty. This error prevents the system from connecting to the software. This system also includes the following: - Beckman Coulter Accuframe - Thomas 669BESUU44TFE Pump - BioTek Valve Module - All relevant manuals and guides - Sami WorkStation EX Software 4.0 - Software setup guide - 2 x 96 well tip holders with all tips present - 2 x light curtain test rods - Filter regulator NAW2000-N02D-C - 2 x boxes of spare parts and replacement parts - 9 x bottles - pipes and connectors for bottles - PC + Monitor - Keyboard - Microscan MS3

This Beckman Coulter Biomek 4000 High Precision Liquid Handling System was removed from a university (more) lab where it was surplus to requirements. All the units are in very good used cosmetic condition but they do have various signs of general use. The system has been powered up and connected to the PC. We were able to get the head to go to the home position and all of the bays using the Biomek 4.1 software. It seems to be working as intended. The lab also said it was fully operational prior to removal. The system consists of: 1 x Beckman Coulter Biomek 4000 Main Unit.1 x Beckman Coulter P200L Tool 1-Tip.1 x Beckman Coulter P20 Tool 1-Tip.1 x Beckman Coulter MP20 Tool 8-Tip.1 x Beckman Coulter P/N 609119 5 Tool, Tool rack. 1 x Lenovo PC with Keyboard, LG Monitor and Dell Wireless Mouse.The PC contains Biomek 4.1 software. Various cables to connect the system up.

Beckman Coulter Biomek FXp Laboratory Automation Workstation w/ PC and Software This item was remove (more)d from a university lab where it was surplus to requirements. The system powered on with stable status lights. The previous client stated it was in working order when last used on: 24.05.24. The system comprises: - Beckman Coulter FX Device Controller - Cat No.: 719366 - 3 x Inheco Single TEC Control - Part Nos.: 8900031 - Serial Nos.: 2549, 2564, 2537 - Inheco Thermoshake Plate Shaker & Cooler/Heater - Part No.: 7100146-B - Serial No.: 3080 - Year: 2018 - Thermo Scientific Masterflex P/S Easy-Load ll Pump - Model: 1400-1320 - Serial No.: B13001697 - Pump heads model: 956-0025 - Lenovo ThinkCentre M83 with Windows 7 PRO - Model: S11DOO - Serial No.: MJ03JHRD - Lenovo ThinkVision Monitor - Serial No.: V6-D1101 - Year: 2010 - Lenovo Keyboard and Mouse Software and Manuals Included:- Beckman Coulter install disks - Masterflex P/S 1400 series operating manual - Biomek Tutorials and setup guides Also Included:- Various adapters, injector pump plungers, nozzle sets, plastic bottles, holding plates, etc. Specifications:- Model: FXp Workstation - Serial No.: A318440537

The TRobot PCR Thermal Cycler from Biometra is an automated PCR machine specifically designed for in (more)tegration in robotic environments. This robotic PCR machine uses a small amount of bench space and consists of two separate parts; the block module which can be placed in the robotic enclosure, and the controller which can be located outside of the PCR workstation for easy access. The block module features a motorized heated lid and a uniquely designed motorized plate lifter to elevate plates from the block for easy removal. In addition, the TRobot Manager Software can be directly linked to any origin robot software, allowing for quick, easy access to all thermocycler functions. Overall, the TRobot is an efficient PCR machine that delivers high sample throughput making it the perfect solution for integration in robotic systems. Block Capacity: 96 x .2ml tubes; 96 well microplates; strips of 8 tubes Block Material: Silver block with gold coating (96 well) Temperature Range: -3 to 99ºC Temperature Gradient: No Max. Heating Rate: 3.5ºC/sec Max. Cooling Rate: 2.5ºC/sec Temperature Uniformity: +/- 0.5ºC Control Accuracy: +/- 0.1ºC Lid Temperature Range: 30ºC to 99ºC Temperature Uniformity of Air Cushion: Highest homogeneity Lid Height Adjustment: Motorized lid and motorized plate lifter Program Memory: 250 average programs; unlimited on PC Auto restart after power failure: Yes Noise Emission: Very low Dimension (W x H x D): 17 x 23 x 20 cm (thermocycler) 19 x 44 x 125 cm (controller) Weight: 5.9 kg (thermocycler) 7.0 kg (controller)

Edwards FTM5 Film Thickness Monitor This was removed from a university lab were it was surplus to re (more)quirements. The unit did not power up in testing. It is in good cosmetic condition with minor marks.

129,600 ClipTips - 50 ul, Thermo Scientific Filtered, Sterile, Racked/96 These are sold on (more) behalf of a client. The lot is brand new and unused. Quantity - Pallet of 27 boxes. 10 Racks in 1 Pack, 5 Packs in 1 Box. Make/Brand - Thermo ScientificModel Number - 94420253Product Number - 13246269Exp Date - 2025/2026SKU - TIP-50FS-THE The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Agilent 1100 HPLC G1365B Multi-Wavelength Detector. This MWD offers excellent sensitivity for both s (more)ingle and multiple wavelength detection. This MWD utilizes deuterium and tungsten lamps with a wavelength range of 190 to 950 nm, offering an expanded detection range with lowest detection limit. The G1365B’s diode array design enables simultaneous acquisition of up to eight compound-specific wavelengths for increased sensitivity and selectivity. The programmable slit (1 to 16 nm) also allows rapid optimization of sensitivity, linearity, and spectral resolution.

Labconco 700801000 FreeZone 8L -50C Complete Freeze Dryer System Features - Patented moisture sensor (more)protects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco 700801000 FreeZone 8L -50C Complete Freeze Dryer System includes the Labconco 700801000 FreeZone 8L -50C Console Freeze Dryer with stainless steel coil and collector, Labconco 7522800 12-Port Drying chamber, and an Edwards RV8 Vacuum Pump. The Labconco 700801000 FreeZone 8L -50C Complete Freeze Dryer with stainless steel coil and collector is designed for lyophilizing moderate to large sample loads or numerous small container batches. The console features a front viewing window, interior space for a vacuum pump, and accommodation for a large tray dryer such as the FreeZone Stoppering Tray Dryers (pump and tray dryer sold separately). These models offer the broadest range of built-in options including a shell freezer. The upright stainless steel collector coil holds 6 liters of ice before defrosting. A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50° C (-58F), suitable for aqueous samples. The Labconco 7522800 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. Drying Chambers provide a means to attach flasks to your freeze dryer or contain samples in bulk. The Edwards RV8 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco FreeZone 8L -50C Complete Freeze Dryer System includes: - Labconco 700801000 FreeZone 8L -50C Complete Freeze Dryer with Stainless Steel Coil and Collector - Labconco 7522800 12-Port Drying chamber - Edwards RV8 Vacuum Pump - All Vacuum Tubing - EMF20 Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty