Packard Multiprobe ll EX Robotic Liquid Handling System Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

The ASP2000 is a precision micro-stepping, high torque drive “workhorse” liquid handler Autosampler  (more)that delivers robust performance for fast and accurate sample preparation and direct injection into UV and HPLC systems. The ASP2000 is suitable for a wide variety of applications with the ability to pierce multiple septa with very high accuracy and repeatability. It also has the ability to inject into tiny injection ports. This unique, near-perfect design of hardware and software performs sample processing tasks effortlessly with seamless integration with the IDIS data management system configurations. Including a Icalis DXi-50 pump and a Icalis RS8 remote serial controller.

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a universit (more)y lab where it was surplus to requirements. The system is in good cosmetic condition with marks from use. All modules power up. We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes. The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working. The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal. We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts. The system is made up of the following; 1 x Matrix Hydra IICat no. 109610 1 x Matrix 2 Position Stage 1 x Apogent Discoveries Matix Hydro Pump ModuleThe unit powers on with all 3 Fills working. 1 x Matrix P1 Control Box 1 x Innovadyne 1-Channel NanofillThe unit powers up. 1 x Grant Instruments Type MS1The unit powers up. Dell Laptop with Microsoft MouseModel - PP04XHydra II-Plus-One Control Software Version 3.1.3 InstalledThe unit powers up and the software runs. Software Discs:Matrix Hydra II-Plus-One Control Software Version 3.1.3Matrix Hydra II-Plus-One Control Software Version 3.1.2SuperLogics LE Software Suite Rev 2.92 x Socket Installation discs Various tubing and accessoriesOperating instructions

Hewlett Packard Series 6890 GC System with HP 6890 Series Injector This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and the oven works.  It is in good cosmetic condition with minor marks. Accessories 1 x N930-1358 1 x N930-1357 1 x Fused Silica Tube TSP020090 Micromass part - 6028621 1x Merlin Microseal septum replacement Part Number - 310 1 x  Restek Premium non-stick w/Center Guide 50 pack 48 left item No - 27090 GC Liner for HP S/SL 1-Taper w/Wool Part number - AG0-4680 Lot no - P01-C6616 1 x Restek Drilled Cyclo Uniliner Hole near top 4.0mmx6.3x78.5 for Agilent GCs Lot - 824835C Cat - 22980 Supelco Capillary Splitter HP-5890 Packed

This listing is for a FisherBrand Bead Mill 24 Homogeniser.`This unit its missing a front plate.The  (more)FisherBrand Bead Mill 24 Homogeniser is an innovative solution for rapid and efficient sample homogenisation, capable of processing up to 24 x 2 mL or 0.5 mL tubes simultaneously. Perfect for laboratories looking to streamline their workflows, this homogeniser ensures more samples can be processed in a shorter amount of time, making it an essential tool for DNA/RNA extraction, tissue homogenisation, and protein purification.Key Benefits:High Throughput: Process 24 samples at once, maximising productivity without compromising quality.User-Friendly Design: The convenient front-loading tube holder allows for easy access and optimal interaction between beads and samples, ensuring thorough homogenisation.Stable Holder: Includes a 24-place tube carriage and Bead Mill Finger Plate that securely holds 2 mL tubes in place, preventing movement during processing.No Downtime: Enjoy non-stop operation with no cool-down required between runs, allowing for continuous processing and eliminating delays.Cross-Contamination Prevention: The use of disposable tubes significantly reduces the risk of cross-contamination, maintaining sample integrity.Compact Footprint: Designed to maximise bench space, the Bead Mill 24 occupies a smaller area without sacrificing performance.Specifications:Run Time: 1 to 99 secondsPerformance Range: 0.8 m/s to 6 m/s, adjustable in increments of 1.5 m/sNumber of Cycles: 1-9Dimensions: 17 x 15 x 13 in. (43.2 x 38.1 x 33 cm)Weight: 65 lb (29.5 kg)Electrical Requirements: 110-230 VAC/50-60 HzCompliance: CE compliant

Benchmark Scientific BT30 Orbi-Blotter Variable Speed Orbital Shaker New equipment in its original  (more)packaging Référence : BT 30 Speed: Variable, 3 to 70 rpm Orbit: 19 mm Max. Capacity: 3 x 2L (9 lbs / 4 kg) Platform Dimensions: 14 x 12 in./ 35 x 30 cm Dimensions: (w x d x h) 14 x 12 x 8 in. 35.5 x 30.5 x 20 cm Weight: 7.5 lbs (3.4kg) Electrical: 230V, 50-60Hz, 50W

CABINET CSB120UB - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm t (more)hick electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards Supplied: - 2 ripiani realizzati in acciaio plastificato (carico max 40 Kg distribuiti uniformemente) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

Radwag laboratory holders have been designed to facilitate faster and more convenient weighing. They (more) ensure perfect and safe fixing of small vessels of typical and non-standard shapes. Features: Maximum weighing ergonomics Direct dosing of a sample into a vessel High efficiency, lower costs (minimized potential loss of samples during transfer) Direct dosing of samples into various vessels (test tubes, round flasks, flat flasks, plastic test-tubes, titration vessels) Laboratory holders are compatible with all Radwag analytical balances. Intended use: glass and plastic tubes - ø8, ø10 and ø12 mm

Tuttnauer 2840ELP Lab Line Benchtop Autoclave Features - Take Advantage of Tuttnauer’s state-of-the- (more)art advanced control system with multi-color display - Intuitive Multi-color display for easier reading gives quick access to important information. Color is used to indicate the stage of the cycle - Safe Automatic pressure locking system. Door will not open when the chamber is over pressured - 316 Ti grade high quality stainless steel chamber and door with electro-polish finish - The 2840EL-D autoclave comes with 8 factory set cycle programs that cover the diverse processing needs of most laboratories and research centers - Connect to a local network for use with RPCR Software for remote monitoring of up to 8 autoclaves - internal printer allows for the printing of Documents date, time, temperature and pressure Advanced multi-color control panel features intuitive method readouts in a multitude of languages. 316 Ti grade high quality stainless steel chamber and door with electro-polish finish allows for long product life and ease of periodic cleaning Designed to save space on your laboratory workbench, the 2840ELP is a front loading benchtop autoclave that provides high quality, repeatable performance and accountability for a wide range of applications used in modern laboratories. Each model has a number of optional added-value features which can be configured for fast cooling, efficient drying, biohazard and waste sterilization, Fo control, and more. The 2840ELP autoclave comes with 8 factory set cycle programs that cover the processing needs of most laboratories and research centers. This model features a printer.INCLUDED: The Tuttnauer 2840ELP Lab Line Benchtop Autoclave includes: - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty