CyBio CyBi Well Vario Pipetting Robot System - 96-Head & 384-Head

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This CTC Analytics Leap HTC PAL Autosampler HPLC was removed from a university lab where it was surp (more)lus to requirements. All units are in good cosmetic condition and powered up. We are unable to test the system further at our facility. Autosampler consists of:Autosampler main unit MXY 01-01BSerial No. 113399 Power supply unit MN01-00 Injector unit MZ01-00DSerial No. 980 Control key pad/screen MB 01-00A 2 x pumps MV 02-01ASerial Nos. 2961, 2963 Sample tray 3 drawer storage MP 02-00B Needle wash unitBottle shelf

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a universit (more)y lab where it was surplus to requirements. The system is in good cosmetic condition with marks from use. All modules power up. We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes. The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working. The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal. We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts. The system is made up of the following; 1 x Matrix Hydra IICat no. 109610 1 x Matrix 2 Position Stage 1 x Apogent Discoveries Matix Hydro Pump ModuleThe unit powers on with all 3 Fills working. 1 x Matrix P1 Control Box 1 x Innovadyne 1-Channel NanofillThe unit powers up. 1 x Grant Instruments Type MS1The unit powers up. Dell Laptop with Microsoft MouseModel - PP04XHydra II-Plus-One Control Software Version 3.1.3 InstalledThe unit powers up and the software runs. Software Discs:Matrix Hydra II-Plus-One Control Software Version 3.1.3Matrix Hydra II-Plus-One Control Software Version 3.1.2SuperLogics LE Software Suite Rev 2.92 x Socket Installation discs Various tubing and accessoriesOperating instructions

Thermo Invitrogen Attune NxT Auto Sampler Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The lab confirmed it was in full working order prior to removal. This item has been refurbished by the manufacturer in 2021. Includes the power supply cable.

Interscience Spiral easySpiral Pro Automatic Spiral Plater This was removed from a university lab wh (more)ere it was surplus to requirements. The item powers on and appears to run through test sequences. The item is in a reasonable, used cosmetic condition with marks from use.

Tecan Freedom Evo Robotic Liquid Handler with TE-Vacs Vacuum Unit and Accessories This system was re (more)moved from a university lab where it was surplus to requirements. The system is in good cosmetic condition.The liquid handler powered on, but the vacuum unit could not be tested due to the lack of a computer control system. No further testing was carried out. There is no PC or software included in this system. The system comprises the following: - Tecan Freedom Evo Unit - Serial No.: 802001119 - Equipped with two robotic arms: one for plate handling and an eight-head injector arm - Tecan TE-Vacs Vacuum Unit - Serial No.: 802001120 - Aluminium stand (150 x 100 x 82cm), supplied flat-packed Included Accessories: - 1 x Kingston 480GB SSD internal memory storage - 7 x Injector pump piston plungers - 8 x Syringe head tubes - 5 x Syringe head tube sheaths - 8 x Insert LV Diti Standard Cone Genis Ref. 10612518 - 1 x 10-litre square plastic bottle - 1 x 5-litre plastic bottle with 3 suction hose nipples and 1 probe - 2 x 10-litre plastic waste and system liquid bottles - 1 x Diti Waste and Wash Station assembly - 6 x Coils of waste and system liquid hoses - 1 x Tecan Te-Shake plate shaker - 4 x Plate storage stacking towers - 6 x 4-plate holders - 2 x 3-plate holders - 5 x Pipette plate holders - 1 x Thermo Finnpipette FP-Focus MCP12 (30-300 microliters) - 4 x Thermo Finnpipette FP-Focus (0.5-5ml)

Perkin Elmer LS 55 Luminescence Spectrometer This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and is in good cosmetic condition with marks from use. The lab reported that it was in good working order prior to removal, but we were unable to test it further at our facility.

Edwards E306A Thermal Evaporator Coating System Lab This item was removed from a university where it (more) was surplus to requirement. It is in reasonable cosmetic condition but does not power on, therefore it is listed as Spares/Repairs. It also has some loose panels. This item is missing its coating chamber.

Scientific Industries SI-0236 Vortex Genie 2 Mixer The Scientific Industries SI-0236 Vortex Genie 2  (more)Mixer offers variable speeds of 600 to 3,200rpm for gentle shaking to rapid vortexing of samples, and can be operated by touch or in continuous mode. This mixer comes with a removable cup head for a single tube up to 40mm in diameter and 200mm in length, and a 3" platform for a beaker, a flask, or multiple tubes. Additional interchangeable mixing heads for holding vessels such as microtubes and microplates are available (sold separately). The mixer's metal housing and shock-absorbing feet provide a stable platform to help prevent walking. This vortexer can be used in cold rooms and incubators. The Vortex Genie 2 is new in the box.INCLUDED: The Scientific Industries SI-0236 Vortex Genie 2 Mixer includes: - Power Cord - Manufacturer's Documentation - 6 Month Parts and Labor Warranty Scientific Industries SI-0236 Vortex Genie 2 Mixer SpecificationsSpeed Range600 to 3,200 RPMMixing CapacityCup head for a single tube; 3" platform for a beaker, flask, or multiple tubesOrbit4mmBase Dimensions165 x 122 x 165 mm (6.5 x 4.8 x 6.5 in)Weight4 kg (8.8 lb)Electrical Requirements120V, 60Hz

IKA R 1381 Propeller 3 - Bladed Stirrer Flow-efficient design. For drawing the material to be mixed (more) from the top and the bottom. Minimum shearing forces. Used at medium to high speedsStirrer Ø: 45 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1381 Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote