CTC Analytics autosampler MN 01-00 PAL power supply

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The ETI-MAX 3000 is a fully automated microtiter plate analyzer performing the complete sample proce (more)ssing (sample pre-dilutions, sample and reagent dispensing, incubations, wash processes, plate transports) as well as the photometric measurement and evaluation. The instrument is controlled by Windows PC software. This software allows the user to process the pre-defined assays of DiaSorin as well as assays programmed by the user. The clear structure with intuitive user-guidance allows simple and quick operation of daily routine jobs as well as programming of user-specific assays. Liquid handling: 1 ml thinner Disposable tips: 300 or 1100 µl Pipette range: Simultaneous operation of 4 plates Precision (samples and reagents): CV < 8.0% at 10 µl, CV < 2.5% at 100 µl Level sensor: Electronic Clot detection: Yes Mixing: Yes (pre-dilution tube and microplate) Multipipetting: Yes (sample, control and reagent) Pipetting time samples: < 18 min/96 wells (100 µl/well) Pipetting time reagents: < 4 min/96 wells (100 µl/well) Carry-over: None Identification: Barcode scanner for primary vessels, controls and reagents, Barcode scanner for microtiter plates Tube: Diameter 10-16 mm, Height 55-100 mm Barcode type: 2/5 interleaved, UPC A & E, 2/5 IATA, 2/5 Industrial, EAN 8 of 13, Code 128, EAN 128, Pharmacode, EAN addendum, 2 of 5, Code-a-bar Capacity: Maximum 240 sample tubes Capacity: 4 separate incubators Temperature range: 5°C above room temperature to 50°C Accuracy: ± 1°C average of the plate Consistency: ± 0.7°C/whole plate Shaking: Lengthwise Capacity: Up to 4 wash buffers Wash head: 1 x 8 Pipette volume: 200 – 2500 µl/well, depending on the assay Precision: ± 5% CV at 300 µl Residual volume: < 2.5 µl in round-bottom wells, < 4 µl for flat-bottom wells Level sensor buffer: Yes Level sensor waste container: Yes Wash programs: 1 to 9, depending on the assay Incubation time: 1 to 999 seconds, depending on the assay Pipette pressure: Adjustable for each assay individually Measurement: Vertical with photodiodes, Extinction or kinetic measurement Channels: 8 Operation: Single or double, with second measurement when the measuring range is exceeded Spectrum: 400 – 700 nm Filter: Up to 8 positions are available, of which 5 are already on board (405, 450, 492, 550, 620 nm) Measurement time: < 10 seconds Dynamic range: – 0.100 to 3,000 absorption units Linearity: 0 –2,000 absorption units ± 1.0% Precision: ± 0.005 absorption units or 2.5% Dimensions (WxDxH): 1130 x 760 x 1000 mm Weight: 130 kg

Perkin Elmer Janus G3 Workstation This system was removed from a university lab where it was surplus (more) to requirements. The system is in good used condition, with various marks and signs of general use. Some of the VariSpan tips are slightly bent and will require replacement. The PC has WinPrep 4.9 software installed. The robot was initialized and successfully passed an XY random 100 move test with no errors. System consists of: - Perkin Elmer Janus AJM8001/T Liquid Handler - Equipped with Varispan 8 Tip Arm - Perkin Elmer Peri Pump - Lenovo ThinkCentre PC with keyboard, mouse, monitor, and barcode scanner - Running Windows 7 - Perkin Elmer WinPrep 4.9 software installed (software CDs included) - Riello UPS - Janus Printed User Manual Accessories included:- 16 x Spare Tips - 16 x Spare Tecan 20734804 Cavro Syringes - 5 x Waste Bottles - Various other small parts, spares, and consumables

Beckman Coulter Biomek NX S8 Laboratory Automation Workstation This was removed from a university la (more)b where it was surplus to requirements. The system powers up, communicates with the PC and is in good working order. It is in good cosmetic condition with minor marks from use. Included are; Model - Biomek NX S8SN - 9898860170 Beckman Coulter Biomek Valve unitCat no. 719657SN - 5080667 PC Accessories include:Lenovo ThinkCentre PC - Has Biomek software version 4.1AMW 17" LCD MonitorLenovo keyboard &amp; mouse Box of accessories/consumables includes:-CablesBeckman Coulter Tube Rack (Boxed)Beckman Coulter Image MORBM33A Recovery DVDAcronis True Image 2016 #1 Backup Solution DVDBeckman Coulter Biomek Seal &amp; Sample Aluminum Foil LidsBeckman Coulter SPAN-8 P250 COND.N/S Tips (1 Rack)2 x Beckman Coulter Modular Reservoir Quarter Module 19ml (Cat-372788)Beckman Coulter Modular Reservoir Full Module 150ml (Cat-372784)Beckman Reservoir holder (Cat-372795)Beckman Capstrip (267002)3 x Packs Blue 13mm Inserts (5 Per Pack)3 x Packs Red 12mm Inserts (5 Per Pack)3 x Packs Black 10mm Inserts (5 Per Pack)1 x Pack White 11mm Inserts (5 In Pack)Bag of mixed Tecan syringesBack of 4 gaugesLead Screw with nut (Ref-989458)Elektroden EL8/4V (B-3204021)

PREVI COLOR GRAM is an automated Gram stainer system that provides accurate, standardized results fo (more)r all types of specimens. ◾ Standardized staining – innovative spray nozzles always ◾ dispense the same reagent volume ◾ No cross contamination – each slide separated & fresh staining reagent used each time ◾ Improved microorganism differentiation compared to manual and bath staining results ◾ Full traceability of reagents, users and maintenance – troubleshoot problems & ensure compliance ◾User management to ensure standardization of the process Slide carousel capacity: 12 slides Throughput: 12 – 120 slides/hour Dimensions (HxWxD): 255 x 585 x 560 mm Weight: 15.5 kg

Memmert UN75PA Natural Convection Paraffin Oven 74L, 115V Setting Temperature Range +20°C to +80°C (more) Setting Temperature Accuracy 0.1 °C Chamber Volume 74 L (2.6 cu. ft.) Features - Internal volume of 74 L (2.6 cu. ft.) for versatile storage and heating applications - Temperature range from +20°C to +80°C with 0.1°C accuracy for precision heating - Equipped with dual Pt100 sensors in a 4-wire circuit for reliable temperature monitoring - TwinDISPLAY control panel with high-definition screens and PID microprocessor technology - AtmoCONTROL software for easy programming and data management via USB or Ethernet - AutoSAFETY with integrated over- and undertemperature monitoring and audible alarms - Durable stainless steel interior, reinforced with ribbing and protected large-area heating - Designed with natural convection for uniform heat distribution throughout the chamber The Memmert UN75PA Natural Convection Paraffin Oven 74L, 115V is engineered to provide precise and uniform heating, making it ideal for applications requiring controlled temperature environments. With a spacious 74-liter (2.6 cu. ft.) capacity, it offers a setting temperature range of +20°C to +80°C, maintaining accuracy within 0.1°C, thanks to its dual Pt100 sensors in a 4-wire circuit. The oven’s TwinDISPLAY control panel features high-definition TFT color displays and a digital PID microprocessor for optimal temperature consistency, while natural convection ensures uniform heat distribution without additional airflow disturbances. Enhanced safety features make this paraffin oven reliable for intensive laboratory settings. The AutoSAFETY function includes integrated over- and undertemperature monitors that follow a preset tolerance range, with audible and visual alarms to alert users of temperature deviations. With AtmoCONTROL software for easy programming and data transfer via USB or Ethernet, the oven allows customizable temperature, program time, and time zone settings. Built with a fully insulated stainless steel door, two-point locking system, and a reinforced, easy-to-clean stainless steel interior, the UN75PA is designed for durability and ease of use. INCLUDED: TheMemmert UN75PA Natural Convection Paraffin Oven 74L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Livestock scale H315/4I series is used to fast and precise determination of mass of cattle and swine (more) with possibility of multiple tarring in all measuring range. The weighing process is carried out with closed entering gate. Barrier height is dependent on the weighing platform dimensions. The scale features an indicator PUE H315 series in stainless steel housing. The indicator comprises a LCD backlit display and function buttons. The platform and the indicator are connected with a long cable for easy mounting of the indicator on a wall. Special software with various dampening filters enables stable and precise mass readout even if the animals are moving on the platform. An optional solution is a scale for measuring all herd of cattle.

Made of fabric, protects device housing against dust, dirt, etc.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Julabo FT402 Immersion Cooler, 115V/60Hz (NRTL Certified) Working Temperature Range -40°C to 30°C R (more)efrigerant R449A Fluid Type Water, Silicone, Fluorinert/Galden Features - Rapid cooling of liquids down to low temperatures - Counter-cooling of liquids in combination with heating circulators - Environmentally friendly by saving precious tap water - User-friendly operation and handling - Compact design, small footprint - Dry ice substitution - Integrated temperature control and display - With external Pt100 sensor (200 x 6 mm dia., stainless steel) JULABO Immersion Coolers provide counter-cooling when connected to a heating circulator or rapidly cool fluids down to a low temperature. With easy operation the units are suitable for a variety of cooling applications. Units are an alternative to cooling with dry ice or tap water. The FT200, FT400 and F900 units simply turn on and the probe cools. Models FT402, FT902 and FT903 include an external Pt100 sensor and display for input of temperature set point. The FT200 has a 9 cm long x 4 cm diameter cooling dumbell. The FT400 / FT402 have a 12 cm long x 5 cm diameter cooling dumbell. The FT900 / FT902 have a flexible cooling probe 65 cm long / 1.5 cm diameter. The FT903 has a solid coil 2.2″ high and 5.5″ diameter. INCLUDED: The Julabo FT402 Immersion Cooler, 115V/60Hz (NRTL Certified) includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty