Arise Biotech EzMate 601s Automated Pipetting System Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The ETI-MAX 3000 is a fully automated microtiter plate analyzer performing the complete sample proce (more)ssing (sample pre-dilutions, sample and reagent dispensing, incubations, wash processes, plate transports) as well as the photometric measurement and evaluation. The instrument is controlled by Windows PC software. This software allows the user to process the pre-defined assays of DiaSorin as well as assays programmed by the user. The clear structure with intuitive user-guidance allows simple and quick operation of daily routine jobs as well as programming of user-specific assays. Liquid handling: 1 ml thinner Disposable tips: 300 or 1100 µl Pipette range: Simultaneous operation of 4 plates Precision (samples and reagents): CV < 8.0% at 10 µl, CV < 2.5% at 100 µl Level sensor: Electronic Clot detection: Yes Mixing: Yes (pre-dilution tube and microplate) Multipipetting: Yes (sample, control and reagent) Pipetting time samples: < 18 min/96 wells (100 µl/well) Pipetting time reagents: < 4 min/96 wells (100 µl/well) Carry-over: None Identification: Barcode scanner for primary vessels, controls and reagents, Barcode scanner for microtiter plates Tube: Diameter 10-16 mm, Height 55-100 mm Barcode type: 2/5 interleaved, UPC A & E, 2/5 IATA, 2/5 Industrial, EAN 8 of 13, Code 128, EAN 128, Pharmacode, EAN addendum, 2 of 5, Code-a-bar Capacity: Maximum 240 sample tubes Capacity: 4 separate incubators Temperature range: 5°C above room temperature to 50°C Accuracy: ± 1°C average of the plate Consistency: ± 0.7°C/whole plate Shaking: Lengthwise Capacity: Up to 4 wash buffers Wash head: 1 x 8 Pipette volume: 200 – 2500 µl/well, depending on the assay Precision: ± 5% CV at 300 µl Residual volume: < 2.5 µl in round-bottom wells, < 4 µl for flat-bottom wells Level sensor buffer: Yes Level sensor waste container: Yes Wash programs: 1 to 9, depending on the assay Incubation time: 1 to 999 seconds, depending on the assay Pipette pressure: Adjustable for each assay individually Measurement: Vertical with photodiodes, Extinction or kinetic measurement Channels: 8 Operation: Single or double, with second measurement when the measuring range is exceeded Spectrum: 400 – 700 nm Filter: Up to 8 positions are available, of which 5 are already on board (405, 450, 492, 550, 620 nm) Measurement time: < 10 seconds Dynamic range: – 0.100 to 3,000 absorption units Linearity: 0 –2,000 absorption units ± 1.0% Precision: ± 0.005 absorption units or 2.5% Dimensions (WxDxH): 1130 x 760 x 1000 mm Weight: 130 kg

Hewlett Packard HP 6890 GC Gas Chromatograph &amp; Agilent 6890 Series Injector This was removed fro (more)m a university lab where it was surplus to requirements. The unit has had the mains power board removed and is sold for spares/repairs. It is in reasonably good cosmetic condition but has some marks from use.

Beckman Coulter Biomek FXP Laboratory Automation Workstation This was removed from a university lab (more) where it was surplus to requirements. The system has been tested and is in good working order. The tiploader was tested with a compressor (not included). The software is installed on the PC and communicates with the system well. Included are; PC/Accessories:-Dell Optiplex 380Iiyama Prolite B2282HSDell PC &amp; MouseStarview 4 Port USB 2.0 KVM SwitchLots of cables (USB, Ethernet, RS232) Other Parts:-Beckman Coulter FX Device Controller Model - 717635 Inheco TEC Control 96SN - 958Powers on Cole Parmer MasterFlex Console DriveModel - 7520-67SN - G07004011Powers on Spare Beckman Coulter AccuFrameSPRIplate 96 - Ring (AGN - 000322)Removable Gripper Rod (REF-394069)4 x Spare plates2 x Nalgene 2Gal BottlesBox of spare plate stands Consumables included:-1 x Box - Greiner bio-one Cellstar 48 Well Cell Culture Plates Qty - 1001 x Box - Beckman Coulter Biomek AP96 P250 Pipette Tips Qty - 10 Racks2 x Boxes - Beckman Coulter P250 Tips, SPAN 8 Sterile Bar Qty - 5 Packs per box, 10 Racks per pack1 x Box - Beckman Coulter P250 Tip, Sterile Barrier Qty - 5 packs3 x Packs - Starlab 500ul, 96 Well assay plate Qty - 27 (2 packs of 10/1 pack of 7)3 x Packs - Costar 3960 2ml Assembly Blocks Qty - 154 x Packs - Unknown Packs - Qty 201 x Box - Beckman SPAN 8 Tube Tool Kit

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

A programmable laboratory incubator with multiparametric microprocessor with the possibility of memo (more)rizing 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable incubator ICT-R FALC

Yamato IC-403CW General Purpose Incubator with Window 97L, 115V Temperature Range Ambient +5°C to 8 (more)0°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 97L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 97L natural convection incubator with observation window. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-403CW General Purpose Incubator with Window 97L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex Fixed Angle Rotor 5mL x 18 The Scilogex Fixed Angle Rotor 5mL x 18 has the capacity to acco (more)modate 18 x 5mL tubes and can a reach maximum speed of 15,000RPM. For use with the DM0636 centrifuge. INCLUDED: The Scilogex Fixed Angle Rotor 5mL x 18 includes: - Cover - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus i-D33XW300C1X5 AM Defender 3000 Washdown Bench Scale, 600 lb., 0.1 lb. Maximum Capacity 600 lb (more). (300 kg) Readability 0.1 lb. (50 g) Platform Size 25.6 x 19.7 in. (650 x 500 mm) Features - Weighing, Checkweighing, Counting, Totalization - 7 Segment LCD with multicolor backlight - Internal power supply with power cord or rechargeable battery - Standard RS232 and optional USB device or ethernet - 304-grade stainless steel platform and frame, stainless steel IP66 indicator, IP67 load cell, non-slip adjustable rubber feet - 150% overload protection - 2 Year Manufacturer's Warranty