Thermo Electron Holten LaminAir Class II Safety Cabinet Lab

This listing is for a CAS BioMAT Class 2 Microbiological Safety Cabinet.The unit is in full working  (more)condition and is ready for immediate release.The BioMAT 2 combines decades of expertise in containment design to offer a range of Class 2 microbiological safety cabinets that prioritize safety, ease of use, and energy efficiency. It provides protection for operators and products while handling biological agents up to Hazard Group 3.Key Features:User-Friendly Interface: Equipped with a 10cm x 6cm TFT touchscreen displaying real-time cabinet operations and an animated airflow diagram. Intuitive controls with crystal-clear iconography simplify functionality, while a four-digit password ensures security.Energy Efficiency: Features energy-efficient EC fan technology and low-loss filters, consuming only 140W under typical operational performance (0.6 m/sec inflow and 0.35 m/sec downflow). The set-back mode reduces energy usage by automatically adjusting settings when the cabinet is unattended.Safety Mechanisms: Full-width LED lighting provides clear indications of any airflow issues, supported by audible alarms and large red LED alerts for malfunctions. The animated airflow diagram gives instant feedback on cabinet status.Quiet Operation: Designed with EC fans and noise reduction technology, the typical noise level is just 49dBA for the 1200mm models, ensuring a comfortable work environment.Sustainability: The BioMAT 2 has achieved CarbonNeutral® product certification, contributing to laboratory carbon reduction goals.Product Specifications:Construction:Cabinet: 1.5mm mild steelInner Liner: Grade 304 stainless steelSide Windows: 5mm UV-resistant toughened glassFront Visor Options:Fixed 200mm aperture with a night door for fumigation.Aerosol-tight motorized sliding sash with anti-trap reverse function (BioMAT 2-S2).Exhaust Options:Standard Exhaust: Single HEPA filter with anti-blowback damper.Thimble Exhaust: Double HEPA filters for enhanced safety.Recirculation: Double HEPA filters with options for vertical or horizontal air discharge.Worktrays: Made from grade 316 stainless steel, available in single or divided sections to meet user needs.Support Stands: Options include fixed height, manually adjustable, or fully DDA-compliant motorized stands.ApplicationsThe BioMAT 2 is ideally suited for laboratories handling biological agents and provides a flexible design tailored to specific laboratory requirements.

A programmable laboratory oven with multiparametric microprocessor with the possibility of memorizin (more)g 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 300°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable OVEN STF-NR FALC

ALS Automated Lab Solution GmbH Cell Collector robot with accompanying Thermo Scientific Herasafe KS (more) 12 bio safety cabinet

Front aperture (work mode)(HxL): 165 x 1800 mm Front aperture maximum height: 350 mm Dimensions (wit (more)hout support frame and filter unit)(LxDxH): 1943 x 844 x 1552 mm Height with support frame: 2297 mm Interior dimensons (LxDxH): 1800 x 605 x 725 mm Work area(LxD): 1719 x 440 mm Weight (without support frame and filter unit): 315 kg

Scanlaf Mars 900 Biohazard Safety Cabinet Class 2 This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and is in good working order. It i in good cosmetic condition with marks from use.

Thermo Fisher Class 2 Safe 2020 1.5 Biological Safety Cabinet This item was removed from a universit (more)y lab where it was surplus to requirements. The unit powers on and the fan, airflow, white light, UV, and window up/down function properly. It is in good cosmetic condition with some minor marks from use. Safe Working area 64 x 120cm Includes:-Manual-Stand for unit

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Astell ASB270BT16963 Autoclave Front Loading Floor Standing Autoclave This was removed from a univer (more)sity lab where it was surplus to requirements. The unit does power up, but the lab reported that it had a vacuum fault. It has not been tested at our facility. It requires a 5 Pin 32amp plug. It is in reasonably good cosmetic condition with minor marks. It is sold for spares/repairs.

These were removed from a university lab where they were surplus to requirements. The system has bee (more)n tested by a service engineer and is in full working order. It has had a replacement power supply recently fitted. It is in good cosmetic condition with minor marks from use.

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

KNF IP65 FEM 1.02 TT.18RCP Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit (more) most laboratory liquid metering and dosing needs. The FEM 1.02 ST.18RCP version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue.INCLUDED: The KNF IP65 FEM 1.02 TT.18RCP Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty