Scanlaf Mars 900 Biohazard Safety Cabinet Class 2 Lab

BIGNEAT F3-XIT BPXS03/01A Safety Cabinet Powder Weighing Station This was removed from a univer (more)sity lab where it was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with marks from use.

Nuaire Class 2 Biological Safety Cabinet NU-437-400S This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

Foster + Freeman MVC3000 Fuming Cabinet This item was removed from a university lab where it was sur (more)plus to requirements. The cabinet powers on and is in reasonable cosmetic condition. Upon powering up, the cabinet initiates a 5-minute Mini Purge, after which the electronic door can be opened. However, the system displays a 'Filter Fault' status after startup, indicating a missing filter.Therefore, further testing could not be conducted. There is no filter fitted, the unit should work fine with one in. Specifications:- 1 Shelf: 74 x 58 cm - 2 Baskets: 57 x 30 x 15 cm - Underneath space: 75 x 64 x 32 cm Model: MVC3000Serial No: 3175

COMBISTORAGE 120 FIRE TYPE 90 CERTIFIED SAFETY CABINET - CHEMISAFE General features: - Completely ma (more)de of 1 -1.5 mm thick galvanized steel sheet, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with fire dampers which close the ducts when the temperature is higher than 70 °C according to DIN 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded - Adjustable leveling feet - Lock and key - Height-adjustable shelves in painted or stainless steel - Shelf fixed with aluminum pins, excluding all risks of sparks - Fire resistant shelves - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470 and EN16121 standards - DOOR OPENING TO THE LEFT, opening with door to the right on request INTERNAL COMPARTMENTS for the storage of various families of chemicals: - Separation by means of 18 mm thick HPL panels covered with thermo-expanding gaskets (possibility of having up to 3 compartments and customization compartments - do not hesitate to contact us) Supplied: - COMPARTMENT FOR FLAMMABLES: 3 painted steel shelves + 1 retention tank with grid - COMPARTMENT FOR ACIDS: 2 plasticized steel shelves - COMPARTMENT FOR BASES: 2 stainless steel shelves - COMPARTMENT FOR TOXIC SUBSTANCES: 1 painted steel shelf (max load 60 kg evenly distributed) Optional: - Shelves - Visual and acoustic alarm - Timer - Fire extinguisher - Electric aspirator - Activated carbon filter - Molecular suction system

Slanted electrical front window Plugged holes in side windows Double socket UV light with magnetic f (more)astening Air flow: 0.45 m/s Recirculation air volume: 965 m3/h Exhaust air volume: 383 m3/h Total air volume: 1348 m3/h Dimensions (WxDxH): 1280 x 840 x 1380 mm Internal dimensions (WxDxH): 1190 x 600 x 665 mm Support frame height: 800 mm Weight: 281 kg

Combination storage cabinet with separate storage for flammable chemicals, acids, bases and other ch (more)emicals. Maximum load shelf fire safety cabinet: 60 kg Maximum largest single storage fire cabinet: 15 L Spill tray capacity: 20 L Maximum load shelf acid/base/chemical cabinets: 80 kg Dimensions (HxWxD): 1950 x 1200 x 600 mm Internal dimensions fire safety cabinet (HxWxD): 1450 x 490 x 420 mm Internal dimensions acid/base/chemical cabinets (HxWxD): 570 x 480 x 540 mm

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

F1 Mass Standard - rectangular weights. Nominal value - 20 kg.

Highest Precision The E1 class mass standard of 50 kg is a cylindrical standard with the highest pre (more)cision, ensuring accuracy at the highest level. Made of high-quality materials to guarantee stability and reliable results. Ideal for laboratory, research, and industrial applications where weighing precision is crucial.

Automatic rotational scales is designed for operation in technological lines of cylindrical packaged (more) goods, like aerosols, sprays, glass and plastic bottles, etc. Control unit is based on Windows Embedded software and SQL database server. Industrial computer is designed to operate in hard industrial conditions. Its cooperation with specially prepared Windows platform makes the system stable and allows for holding set parameters. Graphic and touch screen communication panel makes operation very easy and intuitive which has already been appreciated by users. Rotational device is not equipped with its own conveyor belt, it is mounted over an existing one, which significantly shortens and simplifies its installation. The scale is pneumatically powered. This provides high durability and reliability. The DWR H2 checkweigher features two independent weighing systems in-built into one construction, thanks to which the throughput is 160 pcs/min. Application: Rotational scales is intended to control cylindrically shaped single packages, like aerosol, with diameter 35- 66mm*. System operates in accordance with regulation on Control of Prepacked Goods. Main application: · Chemical industry, · Pharmaceutical industry, · Distilling industry, · Food processing industry. * it is possible to weigh containters with other diameter Functions Rotational scales provide 100 % control of goods transported on the processing line. Goods that do not meet set thresholds are discriminated from the line. Control of goods in accordance with regulation on Control of Packaged Goods, Acquiring data on controlled goods, Definable access levels for scale users, Discrimination of defective goods by weight, Extended statistics conducted in real time, Built-in line performance meter, Reports generated automatically in accordance with the weighing mode, Export of reports to PDF files, Cooperation with other devices in a processing line, Remote start and stop function, Detection of line congestion, Detection of empty line, Cooperation with computer software. Basic technical data Industrial Windows Embedded system, Industrial computer designed for operation in hard conditions, Graphic touch screen, Databases applying SQL servers, Interfaces and ports: RS232, USB and Profibus, Ethernet, Controlling - informative outputs control, IP55 or IP65 Cooperation with peripheral devices Rotational scale is prepared to cooperate with peripheral devices, and devices form a processing line. I/O set provides broad configuration possibilities and full integration of the scale with an existing processing line. Cooperation with dosing device with feedback, Cooperation with barcode scanner, Printouts on receipt printers, Remote control , Keeping records from weighing on a computer. Implementation options: Separate discriminating set for "too light" and "too heavy" goods, Sounder and/or Warning tower lights, Cooperation with printers and label printers, Two USB ports, Profibus and Modbus interface support, Weighing record application.

Large digital display Precise microprocessor control Temperature range: ambient +5°C to 150°C (0.1°C (more) increments) Anodized aluminum block (24x 1.5 mL tubes) Easy user calibration Sigle block model

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW